Truck did a little work today - The 1947 - Present Chevrolet & GMC Truck Message Board Network

jeffspower · 01-01-2010, 07:40 PM

It hasn't been used for much work lately, or driven at all for that matter. But it did a little today. I waited till the roads were clear & picked a route were there isn't any road salt layin to get some firewood. I put my 1/2 truck to work too

Oak sure is going to heat better than the sugar maple I took down in my yard!

big mike71 · 01-01-2010, 09:17 PM

Nice truck and good load of wood, I drive thru Easton every Wed. in my Sysco truck if you see me wave or flip me the bird.

koolky · 01-01-2010, 09:22 PM

That is a very nice truck guy. It’s nice to them used productively once and a while.

jeffspower · 01-01-2010, 09:40 PM

Quote:

Originally Posted by big mike71

Nice truck and good load of wood, I drive thru Easton every Wed. in my Sysco truck if you see me wave or flip me the bird.

I think I have seen you roll thru before! I'll choose to wave

You'll catch a glimpse of my truck as you head North, just look to the left when you cross the intersection "downtown"

**LockDoc** · 01-01-2010, 09:49 PM

-
That's a pretty good load Jeff. Should be a couple of BTU's there..

LockDoc

chipflyer · 01-01-2010, 10:43 PM

The truck is not all that did some work today.

Jeff

**special-K** · 01-01-2010, 10:51 PM

Hey Aachie,I was just wonderin,you know,if that was as hawd for you as fo-wah the truck.

Well Edith,it woulda been alot easyah if we coulda got Meathead away from whatevah he does while he ain`t woikin`a job to take care of my daughta wit.

jeffspower · 01-02-2010, 12:10 AM

Well, to be honest... I didn't do but 15 minutes work loading up. I just backed into a machine shed and 4 guys started loading, I handed them some cash and was on my way

I'm not from here and haven't had any luck finding a place to cut. Trees everywhere, but I'm not crazy about pulling on somebody's place and asking to pay or barter for access. The guys I met today were a great family though and not looking to retire from selling 2 loads of wood either, so it worked out good.

All 4 of them were reluctant to throw wood in my truck for fear of banging it up. I told them not to worry, it's not made out of foil! They like it so well, if I decide to do it... I might end up with a new roof on my house, some cash in my pocket and a new owner for my truck this spring

**Dieselwrencher** · 01-09-2010, 12:43 AM

Nice Jeff! Man that truck sure looks nice! I'm also at the point to just going and buying wood. We have been burning a lot due to the cold and can't keep up. We just got the shop up and haven't burnt wood for over 15 years. now ofcourse we are and had no wood drying. Last weekend my buddy pulled off the side on a county road and cut up a dead tree that has been laying there for over 2yrs. It burnt nice. May have to do that some more, and save the county the hassle. LOL

yellow70GMC · 01-09-2010, 10:22 PM

Don't trade that beautiful truck for a new roof! If your roof starts leaking too bad, sleep in the truck!

01-01-2010, 07:40 PM	#1
jeffspower Well, Whoop-dee-do! Join Date: Mar 2003 Location: Easton, Mo. pop.- me & scarcely a few others Posts: 2,302	Truck did a little work today It hasn't been used for much work lately, or driven at all for that matter. But it did a little today. I waited till the roads were clear & picked a route were there isn't any road salt layin to get some firewood. I put my 1/2 truck to work too Oak sure is going to heat better than the sugar maple I took down in my yard! Attached Images __________________ '68 GMC shortbox 4x4 350/SM465/T221- bought it in '83 SOLD '72 K20 500 Cad/TH400/NP205 SOLD '92 Chevy 2500 6.5 mech TD 4L80E crusty daily driver '72 Monte Carlo... sweet low mile toy '11 Dodge Challenger IE 392 6spd... midlife car

01-01-2010, 09:17 PM	#2
big mike71 Registered User Join Date: Mar 2009 Location: independence mo Posts: 2,111	Re: Truck did a little work today Nice truck and good load of wood, I drive thru Easton every Wed. in my Sysco truck if you see me wave or flip me the bird. __________________ I'm not as good as I once was, But I'm as good once as I ever was.

01-01-2010, 09:22 PM	#3
koolky 67-72 Addicted Join Date: Oct 2007 Location: Guelph Ontario Posts: 256	Re: Truck did a little work today That is a very nice truck guy. It’s nice to them used productively once and a while. __________________ '72 K20

01-01-2010, 09:49 PM	#5
LockDoc The Older Generation Join Date: Aug 2006 Location: Montezuma, Iowa Posts: 25,818	Re: Truck did a little work today - That's a pretty good load Jeff. Should be a couple of BTU's there.. LockDoc __________________ Leon Locksmith, Specializing In Antique Trucks, Automobiles, & Motorcycles (My Dually Pickup Project Thread) http://67-72chevytrucks.com/vboard/s...d.php?t=829820 -

01-01-2010, 10:43 PM	#6
chipflyer Registered User Join Date: May 2004 Location: Topeka, Ks Posts: 2,293	Re: Truck did a little work today The truck is not all that did some work today. Jeff __________________ I'm not a pessimist, I'm just optimistic that bad things are going to happen. 1971 Cheyenne Super K10 - tilt, cruise, air, am/fm, tow hooks, factory buckets! 1986 Jeep J10 pickup, - 5.3L Vortec with 4L60e and NP241.

01-01-2010, 10:51 PM	#7
special-K Special Order Join Date: Nov 2004 Location: Mt Airy, MD Posts: 85,851	Re: Truck did a little work today Hey Aachie,I was just wonderin,you know,if that was as hawd for you as fo-wah the truck. Well Edith,it woulda been alot easyah if we coulda got Meathead away from whatevah he does while he ain`t woikin`a job to take care of my daughta wit. __________________ "BUILDING A BETTER WAY TO SERVE THE USA"......67/72......"The New Breed" GMC '67 C1500 Wideside Super Custom SWB: 327/M22/3.42 posi.........."The '67" (project) GMC '72 K2500 Wideside Sierra Custom Camper: 350/TH350/4.10 Power-Lok..."The '72" (rolling) Tim "Don't call me a redneck. I'm a rough cut country gentleman" R.I.P. ~ East Side Low Life ~ El Jay ~ 72BLUZ ~ Fasteddie69 ~ Ron586 ~ 67ChevyRedneck ~ Grumpy Old Man ~

01-02-2010, 12:10 AM	#8
jeffspower Well, Whoop-dee-do! Join Date: Mar 2003 Location: Easton, Mo. pop.- me & scarcely a few others Posts: 2,302	Re: Truck did a little work today Well, to be honest... I didn't do but 15 minutes work loading up. I just backed into a machine shed and 4 guys started loading, I handed them some cash and was on my way I'm not from here and haven't had any luck finding a place to cut. Trees everywhere, but I'm not crazy about pulling on somebody's place and asking to pay or barter for access. The guys I met today were a great family though and not looking to retire from selling 2 loads of wood either, so it worked out good. All 4 of them were reluctant to throw wood in my truck for fear of banging it up. I told them not to worry, it's not made out of foil! They like it so well, if I decide to do it... I might end up with a new roof on my house, some cash in my pocket and a new owner for my truck this spring __________________ '68 GMC shortbox 4x4 350/SM465/T221- bought it in '83 SOLD '72 K20 500 Cad/TH400/NP205 SOLD '92 Chevy 2500 6.5 mech TD 4L80E crusty daily driver '72 Monte Carlo... sweet low mile toy '11 Dodge Challenger IE 392 6spd... midlife car Last edited by jeffspower; 01-02-2010 at 12:12 AM. Reason: oops

01-09-2010, 12:43 AM	#9
Dieselwrencher 6>8 Plugless........ Join Date: Sep 2007 Location: Prairie City, Ia Posts: 17,142	Re: Truck did a little work today Nice Jeff! Man that truck sure looks nice! I'm also at the point to just going and buying wood. We have been burning a lot due to the cold and can't keep up. We just got the shop up and haven't burnt wood for over 15 years. now ofcourse we are and had no wood drying. Last weekend my buddy pulled off the side on a county road and cut up a dead tree that has been laying there for over 2yrs. It burnt nice. May have to do that some more, and save the county the hassle. LOL __________________ Ryan 1972 Chevy Longhorn K30 Cheyenne Super, 359 Inline 6 cylinder, Auto Trans, Tilt, Diesel Tach/Vach, Buckets, Rare Rear 4-link and air ride option Build Thread 1972 GMC Sierra Grande Longhorn 4x4 1972 Chevy Cheyenne Super K20 Long Step side tilt, tach, tow hooks, AC, 350 4 speed 1972 C10 Suburban Custom Deluxe 1969 Chevy milk truck 1971 Camaro RS 5.3 BTR STG3 Cam Super T10 1940 Ford 354 Hemi 46RH Ford 9" on air ride huge project *Tired of spark plugs? Check this out.*

01-09-2010, 10:22 PM	#10
yellow70GMC Registered User Join Date: Sep 2005 Location: Reno, NV Posts: 161	Re: Truck did a little work today Don't trade that beautiful truck for a new roof! If your roof starts leaking too bad, sleep in the truck!



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.