Have you guys seen this new brake kit from CPP? What a dream come true? - The 1947 - Present Chevrolet & GMC Truck Message Board Network

*CPPJEFF* · 01-12-2010, 07:15 PM

Hey guys, this kit we have been offering is a dream come true and as most of you guys recognize it i would like to take a second and talk about the features and benefits of our new 2 " dropped modular spindle and spindle kits. First off it narrows the trac width 3/4 of in inch per side from the old style disc kits which is a ton and it narrows the trac width a 1/4 per side from factory drum! If you are using big wheels or lowering your truck a substantial amount this kit will make the world of difference! You can use factory 12" brake rotors or you can use the 13" monster disc kit that we now offer as pictured. Guys if you need a kit let me know i would love to get some members vehicles and will cut you a deal for a limited time on kit to kind of spread the news! THERE IS NO SECOND BEST! THIS SPINDLE IS THE FUTURE OF DISC BRAKES! Let me know if i can help, and i will post stuff on occasion like this that i think members need to be aware of. When i saw this kit for the first time my face was like

smashingchuck · 01-12-2010, 09:08 PM

How many pistons in the caliper, and can it be used with a Bell Tech 3" spindle?

68 short step · 01-12-2010, 11:14 PM

i dont want to speak for jeff, but i can answer that...they are 2 piston calipers 52mm (i believe), and no, they are designed specifically for their modular spindle....again this is just from what i understand. also their advertised price is very attractive, compaired to other big brake kits...it would behoove you to get everything, instead of 'makeing' it fit your spindles IMO

panic66 · 01-12-2010, 11:23 PM

Any plans for a rear kit anytime soon?

andrewmp6 · 01-13-2010, 12:13 AM

Look in the lmc catalog page 57 its there front and rear kits but i know of two other companies that make big brakes too like McGaughy and abspowerbrake.

*CPPJEFF* · 01-13-2010, 12:39 AM

Quote:

Originally Posted by 68 short step

i dont want to speak for jeff, but i can answer that...they are 2 piston calipers 52mm (i believe), and no, they are designed specifically for their modular spindle....again this is just from what i understand. also their advertised price is very attractive, compaired to other big brake kits...it would behoove you to get everything, instead of 'makeing' it fit your spindles IMO

This will answer smashingshucks question perfect! Thanks 68 short step your hired!! Great answer.

*CPPJEFF* · 01-13-2010, 12:41 AM

Quote:

Originally Posted by panic66

Any plans for a rear kit anytime soon?

WE have the matching rear kit in stock, its a 12 inch rotor. Great question!

*CPPJEFF* · 01-13-2010, 12:44 AM

Quote:

Originally Posted by andrewmp6

Look in the lmc catalog page 57 its there front and rear kits but i know of two other companies that make big brakes too like McGaughy and abspowerbrake.

Andrew totally agree there is other companies out ther that make all kinds of stuff but NOBODY makes a kit quite like this one, its in a class of its own, not saying this cause i work there but the kit speaks for itself.

panic66 · 01-13-2010, 12:52 AM

Quote:

Originally Posted by CPPJEFF

WE have the matching rear kit in stock, its a 12 inch rotor. Great question!

Hey jeff, do you know the part number for ther rear kit?

*CPPJEFF* · 01-13-2010, 12:58 AM

Quote:

Originally Posted by panic66

Hey jeff, do you know the part number for ther rear kit?

It is all based on the rear of the truck because of the E-brake cables because 63-66 are one part # and 67-72 is another but the 6772 is 6772rwbk-p12 . What year do you have?

panic66 · 01-13-2010, 01:06 AM

Quote:

Originally Posted by CPPJEFF

It is all based on the rear of the truck because of the E-brake cables because 63-66 are one part # and 67-72 is another but the 6772 is 6772rwbk-p12 . What year do you have?

I have a 72, our these on the cpp website?

*CPPJEFF* · 01-13-2010, 01:08 AM

Quote:

Originally Posted by panic66

I have a 72, our these on the cpp website?

I dont think they are but i will try to get them on the website. I also noticed they are not in the new catalog but should be in it shortly. I will try to post a picture tomorrow.

**N2TRUX** · 01-13-2010, 01:28 AM

Quote:

Originally Posted by CPPJEFF

..... i would love to get some members vehicles and will cut you a deal for a limited time on kit to kind of spread the news! ..

This sounds very appealing...

panic66 · 01-13-2010, 01:35 AM

Quote:

Originally Posted by CPPJEFF

I dont think they are but i will try to get them on the website. I also noticed they are not in the new catalog but should be in it shortly. I will try to post a picture tomorrow.

Yea i just got a catalog last week with a order and didnt see them in there, a pic and maybe pricing would be awesome...

thx a lot Jeff

POPO1984 · 01-13-2010, 01:39 AM

Sounds really good to me too

Quote:

Originally Posted by N2TRUX

This sounds very appealing...

SBTork · 01-13-2010, 01:40 AM

Im curious, what kind of rotors do these use? Are they a common part house, off the shelf, brake rotor, or are they specific to you guys? Do you guys offer the replacement rotors once the originals wear out? Do the brake pads fall under the same situation?

djw32 · 01-13-2010, 02:00 AM

Jeff,
Is this spindle made by CPP or western chassis tech? I purchased the 6370SWBK-6, and was surprised to find a western chassis tech spindle in the kit.

Also, I think it is great that you are cleaning up CPP name. I was one of the customers that was shafted(lied to) in PERSON by one of your salesmen. I believe you are the man who gave me the option of exchanging the brake kit back when I had a problem.
FYI: The brakes work well for a single piston caliper and the hydroboost system I have on my truck.

You may want to add a note on the website about brake kit 6370SWBK-6 does not work with stock 6 lug wheels.

68 short step · 01-13-2010, 11:47 AM

Quote:

Originally Posted by N2TRUX

This sounds very appealing...

ya, tell us more, id be instrested in the 14" version (drilled/slotted) with the 13" rear (71 chevy truck, 5x5 pattern)

*CPPJEFF* · 01-13-2010, 01:45 PM

Quote:

Originally Posted by 68 short step

ya, tell us more, id be instrested in the 14" version (drilled/slotted) with the 13" rear (71 chevy truck, 5x5 pattern)

Great question, to deeper prove that nothing compares to this spindle both Wilwood and Baer brakes ONLY use this spindle for there 13" and 14" inch kits that are currently on the market today. As for the parts the list the rotors are sold through us directly and the calipers and pads can be obtained at your local parts store.

*CPPJEFF* · 01-13-2010, 01:48 PM

Quote:

Originally Posted by djw32

Jeff,
Is this spindle made by CPP or western chassis tech? I purchased the 6370SWBK-6, and was surprised to find a western chassis tech spindle in the kit.

Also, I think it is great that you are cleaning up CPP name. I was one of the customers that was shafted(lied to) in PERSON by one of your salesmen. I believe you are the man who gave me the option of exchanging the brake kit back when I had a problem.
FYI: The brakes work well for a single piston caliper and the hydroboost system I have on my truck.

You may want to add a note on the website about brake kit 6370SWBK-6 does not work with stock 6 lug wheels.

Correct the Western Chassis spindle is one of our "old style' 2.5" drop spindles that they have made for us for years. They DO NOT make the new Modular spindle. As for coming on here, i will do whatever i can to help you guys out. I was never alerted to any issues till quite recently and we will make sure these things dont happen. My appologies.

smashingchuck · 01-13-2010, 01:59 PM

So I guess this may be a little OT, but what big brakes will I be able to run with my 3" drop spindles and not break the brake bank? ;p

Slow Build · 01-13-2010, 03:58 PM

I have a 64 C-10. Can I run 15x8 steel rally wheels with the modular spindles and 12" stock rotors? Would there be issues with lower control arm interfeering with the wheel?

*CPPJEFF* · 01-13-2010, 06:13 PM

Quote:

Originally Posted by Slow Build

I have a 64 C-10. Can I run 15x8 steel rally wheels with the modular spindles and 12" stock rotors? Would there be issues with lower control arm interfeering with the wheel?

Slow i have never heard of any issues with a 15x8 steel rally. You have quite a bit of real estate on that lower arm so i am going to say no way on any interference. Thanks Jeff.

Hottrucks · 01-13-2010, 06:20 PM

are they available in 6 lug???

*CPPJEFF* · 01-13-2010, 06:23 PM

Quote:

Originally Posted by Hottrucks

are they available in 6 lug???

5 or 6 lug no sweat!

01-12-2010, 07:15 PM	#1
CPPJEFF Account Suspended Join Date: Jan 2010 Location: Anaheim California Posts: 713	Have you guys seen this new brake kit from CPP? What a dream come true? Hey guys, this kit we have been offering is a dream come true and as most of you guys recognize it i would like to take a second and talk about the features and benefits of our new 2 " dropped modular spindle and spindle kits. First off it narrows the trac width 3/4 of in inch per side from the old style disc kits which is a ton and it narrows the trac width a 1/4 per side from factory drum! If you are using big wheels or lowering your truck a substantial amount this kit will make the world of difference! You can use factory 12" brake rotors or you can use the 13" monster disc kit that we now offer as pictured. Guys if you need a kit let me know i would love to get some members vehicles and will cut you a deal for a limited time on kit to kind of spread the news! THERE IS NO SECOND BEST! THIS SPINDLE IS THE FUTURE OF DISC BRAKES! Let me know if i can help, and i will post stuff on occasion like this that i think members need to be aware of. When i saw this kit for the first time my face was like Attached Images Last edited by CPPJEFF; 01-12-2010 at 07:49 PM.

01-12-2010, 09:08 PM	#2
smashingchuck It'd be alot cooler if you did Join Date: May 2003 Location: Three Rivers, MI Posts: 2,345	Re: Have you guys seen this new brake kit from CPP? What a dream come true? How many pistons in the caliper, and can it be used with a Bell Tech 3" spindle? __________________ 78 Build Thread 4Runner Build

01-12-2010, 11:14 PM	#3
68 short step Senior Member Join Date: Aug 2005 Location: tulsa OK Posts: 3,070	Re: Have you guys seen this new brake kit from CPP? What a dream come true? i dont want to speak for jeff, but i can answer that...they are 2 piston calipers 52mm (i believe), and no, they are designed specifically for their modular spindle....again this is just from what i understand. also their advertised price is very attractive, compaired to other big brake kits...it would behoove you to get everything, instead of 'makeing' it fit your spindles IMO Last edited by 68 short step; 01-12-2010 at 11:16 PM.

01-12-2010, 11:23 PM	#4
panic66 Registered User Join Date: Dec 2009 Location: Fort Worth, Texas Posts: 27	Re: Have you guys seen this new brake kit from CPP? What a dream come true? Any plans for a rear kit anytime soon?

01-13-2010, 12:13 AM	#5
andrewmp6 Registered User Join Date: Jan 2009 Location: Louisville,Ky Posts: 5,811	Re: Have you guys seen this new brake kit from CPP? What a dream come true? Look in the lmc catalog page 57 its there front and rear kits but i know of two other companies that make big brakes too like McGaughy and abspowerbrake.

01-13-2010, 01:40 AM	#16
SBTork Garage wrench Join Date: Feb 2008 Location: LaCrosse, WI Posts: 1,855	Re: Have you guys seen this new brake kit from CPP? What a dream come true? Im curious, what kind of rotors do these use? Are they a common part house, off the shelf, brake rotor, or are they specific to you guys? Do you guys offer the replacement rotors once the originals wear out? Do the brake pads fall under the same situation? __________________ -Adam 90 V1500 GMC Suburban 350/700R4/NP241..... 01 Saturn SL1 stock DD.....

01-13-2010, 02:00 AM	#17
djw32 Registered User Join Date: May 2006 Location: So.Cal Posts: 542	Re: Have you guys seen this new brake kit from CPP? What a dream come true? Jeff, Is this spindle made by CPP or western chassis tech? I purchased the 6370SWBK-6, and was surprised to find a western chassis tech spindle in the kit. Also, I think it is great that you are cleaning up CPP name. I was one of the customers that was shafted(lied to) in PERSON by one of your salesmen. I believe you are the man who gave me the option of exchanging the brake kit back when I had a problem. FYI: The brakes work well for a single piston caliper and the hydroboost system I have on my truck. You may want to add a note on the website about brake kit 6370SWBK-6 does not work with stock 6 lug wheels.

01-13-2010, 01:59 PM	#21
smashingchuck It'd be alot cooler if you did Join Date: May 2003 Location: Three Rivers, MI Posts: 2,345	Re: Have you guys seen this new brake kit from CPP? What a dream come true? So I guess this may be a little OT, but what big brakes will I be able to run with my 3" drop spindles and not break the brake bank? ;p __________________ 78 Build Thread 4Runner Build

01-13-2010, 03:58 PM	#22
Slow Build Registered User Join Date: Sep 2009 Location: California Delta Posts: 2,163	Re: Have you guys seen this new brake kit from CPP? What a dream come true? I have a 64 C-10. Can I run 15x8 steel rally wheels with the modular spindles and 12" stock rotors? Would there be issues with lower control arm interfeering with the wheel? __________________ Name: Rich Current Ride: 1964 C-10 Short Fleetside Daily Driver: 2005 GMC crew cab short fleetside /2001 Chevy Tahoe Past GM Trucks: 1959 GMC short stepside 1968 GMC short stepside-4x4 1973 Chevy short stepside 1989 Chevy short fleetside-reg cab 1993 Chevy short fleetside-Xcab 2002 Chevy short fleetside-Xcab Save the dinosaurs, use synthetic oil.

01-13-2010, 06:20 PM	#24
Hottrucks Redefining LowBudget Join Date: Mar 2009 Location: lebanon Cow Hampshire Posts: 4,538	Re: Have you guys seen this new brake kit from CPP? What a dream come true? are they available in 6 lug???



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.