IN Arm rests, tach, reading light and inner fuzzy - The 1947 - Present Chevrolet & GMC Truck Message Board Network

TLoz · 12-20-2009, 10:59 PM

I have the following for sale:

2 red arm rests for a 77, no cracks have been repainted. $20 for both.

1 chrome auto-meter tach. 6 months old. Works perfectly. Replaced with a dash tach. $20

1 reading light out of a newer suburban. Includes harness connector. No cracks or discoloration. $20

1 GM inner fuzzy weather strip P/N 15569071. Still unopened. $20

Shipping not included.

Scootin 81 C20 · 12-20-2009, 11:16 PM

P.M. sent on tach.

Thanks
Benjamin.

Gary66 · 12-22-2009, 12:30 AM

what would shipping on armrests be to 62906?

**jerry moss** · 12-25-2009, 05:57 PM

i'd like to get in line for the armrests-shipping to business address 94513

TLoz · 12-26-2009, 12:31 AM

The arm rests are for the rear doors on a suburban. I do have two sets of nice brown sets for the front doors, but they are for a 88. They have the studs on them. Sorry for the error in listing. If still interested I'll post pics of the brown ones. Thanks, Tom

**ScottH** · 12-26-2009, 12:00 PM

Can u do $20 shipped on the reading light?

Also if tach is still available can u tell me the diameter?

Thanks.

Scott

**jerry moss** · 12-26-2009, 11:55 PM

thanks for the clarification, i need them for a 77 blazer.

TLoz · 12-28-2009, 12:10 AM

Scott H,
The tach has been sold. As far as the readig light goes, what's your zip code? Thanks, Tom

**ScottH** · 12-28-2009, 11:27 AM

Tom, it's 08753

Thanks.

Scott

TLoz · 12-28-2009, 03:47 PM

Scott,
Sorry, but no can do on the light. It's $20 plus shipping. The shipping would be over $10. I would still need to box it up and take it 10 miles to have delivered. Thanks for the offer anyway. Regards, Tom

**ScottH** · 12-28-2009, 08:00 PM

Tom, thanks for getting back to me. I figured it would fit in a $5 USPS flat rate box. Any chance u could get me a pick of the back (need to see how it mounts) and tell me the dimensions? Trying to see if it will work in an old van I have.

Thanks.

Scott

TLoz · 12-29-2009, 09:38 PM

Scott,
Please find attached a picture of the backside. The measurement is 8 3/4 X 2 7/8". It attaches using the 3 screws. The brown stuff you see is the headliner dust. Later, Tom

**ScottH** · 12-29-2009, 11:35 PM

Tom, thanks very much for the info. I'll take a look at the van tomorrow to see if it will work.

Scott

**ScottH** · 01-01-2010, 02:32 PM

Tom, finally had a chance to do some measuring. Looks like it should work, how does $25 shipped sound (flat rate box)?

Thanks

Scott

TLoz · 01-01-2010, 07:59 PM

Scott,
$25 sounds good. If it doesn't fit, just let me know and you can return it. PM me your address. Thanks, Tom

Eighty-6 · 01-08-2010, 01:38 PM

Will the brown arm rests from the 88 fit 86 door panels? What condition are they in?

TLoz · 01-09-2010, 11:23 PM

Eighty-6,
The brown arm rests are in excellent condition. Problem is I don't believe that they will work on a 86. At least that is what the parts books show. These are off a suburban, don't know if they ran a year late or not. Anybody else know? Thanks, Tom

Eighty-6 · 01-10-2010, 11:10 AM

Quote:

Originally Posted by TLoz

Eighty-6,
The brown arm rests are in excellent condition. Problem is I don't believe that they will work on a 86. At least that is what the parts books show. These are off a suburban, don't know if they ran a year late or not. Anybody else know? Thanks, Tom

My luck

TLoz · 01-10-2010, 04:50 PM

Would it help if I took some measurements and pics?

Eighty-6 · 01-10-2010, 11:10 PM

If there's a chance they may fit pics would help. Thanks for your time.

TLoz · 01-12-2010, 09:37 PM

Eighty-6,
Here are some pics. Starting with the stud end the measurements are:
end to stud 3 1/4
stud to hole 5 1/8
hole to hole 5 1/8
hole to end 3 5/8
overall length 17 1/4

Two colors brown and tan. No cracks or rips. If you want to try them, let me know. All my stuff can be returned if you're not happy. Thanks, Tom

12-20-2009, 10:59 PM	#1
TLoz Registered User Join Date: Dec 2003 Location: Indy Posts: 326	Arm rests, tach, reading light and inner fuzzy I have the following for sale: 2 red arm rests for a 77, no cracks have been repainted. $20 for both. 1 chrome auto-meter tach. 6 months old. Works perfectly. Replaced with a dash tach. $20 1 reading light out of a newer suburban. Includes harness connector. No cracks or discoloration. $20 1 GM inner fuzzy weather strip P/N 15569071. Still unopened. $20 Shipping not included. Attached Images

12-20-2009, 11:16 PM	#2
Scootin 81 C20 3/4 Ton Rodder Join Date: Jan 2009 Location: Manlius, IL Posts: 1,146	Re: Arm rests, tach, reading light and inner fuzzy P.M. sent on tach. Thanks Benjamin. __________________ 1981 Chevy Scottsdale C20 "Orange Crush": SOLD 1989 Chevy Silverado K2500: All Stock (For Now), 350 TBI/700R4. DD/Light Duty Toy.

12-22-2009, 12:30 AM	#3
Gary66 Registered User Join Date: Jan 2002 Location: anna, Illinois Posts: 308	Re: Arm rests, tach, reading light and inner fuzzy what would shipping on armrests be to 62906? __________________ 2003 2500 HD Crew Cab 1965 GMC K10 1972 Chevrolet k5 blazer

12-25-2009, 05:57 PM	#4
jerry moss Born Psycho Join Date: Feb 2001 Location: brentwood,cal,usa Posts: 4,946	Re: Arm rests, tach, reading light and inner fuzzy i'd like to get in line for the armrests-shipping to business address 94513 __________________ jerry moss 72 cheyenne super K20- tilt,tach,vacuum,speedwarning,buckets,shoulder belts,am/fm,tow hooks,bumper guards,toolbox,aux. fuel tank,posi front and rear,plus other goodies!!! SOLD 69 suburban K20-tilt,tach,vacuum,speedwarning,buckets,shoulder belts,am/fm,4 inch all spring lift,4 speed, 14 bolt full floater, dana 44 HD,warn winch,posi front and rear,tow hooks,plus other goodies. 73/80 chevy/gmc K20 SB400,turbo 400,205,tilt,a-c,gas hog. 77 K/5 cheyenne blazer-daily driver/beater. SON HAS IT NOW BRENTWOOD,CALIFORNIA

12-26-2009, 12:31 AM	#5
TLoz Registered User Join Date: Dec 2003 Location: Indy Posts: 326	Re: Arm rests, tach, reading light and inner fuzzy The arm rests are for the rear doors on a suburban. I do have two sets of nice brown sets for the front doors, but they are for a 88. They have the studs on them. Sorry for the error in listing. If still interested I'll post pics of the brown ones. Thanks, Tom

12-26-2009, 12:00 PM	#6
ScottH Senior Member Join Date: Sep 2002 Location: Hampstead, NC Posts: 8,190	Re: Arm rests, tach, reading light and inner fuzzy Can u do $20 shipped on the reading light? Also if tach is still available can u tell me the diameter? Thanks. Scott __________________ 1963 C10 swb fleetside 1966 GMC G1000 Handi-bus (future project) 1955 Chevy 2 dr. wagon Last edited by ScottH; 12-26-2009 at 12:01 PM.

12-26-2009, 11:55 PM	#7
jerry moss Born Psycho Join Date: Feb 2001 Location: brentwood,cal,usa Posts: 4,946	Re: Arm rests, tach, reading light and inner fuzzy thanks for the clarification, i need them for a 77 blazer. __________________ jerry moss 72 cheyenne super K20- tilt,tach,vacuum,speedwarning,buckets,shoulder belts,am/fm,tow hooks,bumper guards,toolbox,aux. fuel tank,posi front and rear,plus other goodies!!! SOLD 69 suburban K20-tilt,tach,vacuum,speedwarning,buckets,shoulder belts,am/fm,4 inch all spring lift,4 speed, 14 bolt full floater, dana 44 HD,warn winch,posi front and rear,tow hooks,plus other goodies. 73/80 chevy/gmc K20 SB400,turbo 400,205,tilt,a-c,gas hog. 77 K/5 cheyenne blazer-daily driver/beater. SON HAS IT NOW BRENTWOOD,CALIFORNIA

12-28-2009, 12:10 AM	#8
TLoz Registered User Join Date: Dec 2003 Location: Indy Posts: 326	Re: Arm rests, tach, reading light and inner fuzzy Scott H, The tach has been sold. As far as the readig light goes, what's your zip code? Thanks, Tom

12-28-2009, 11:27 AM	#9
ScottH Senior Member Join Date: Sep 2002 Location: Hampstead, NC Posts: 8,190	Re: Arm rests, tach, reading light and inner fuzzy Tom, it's 08753 Thanks. Scott __________________ 1963 C10 swb fleetside 1966 GMC G1000 Handi-bus (future project) 1955 Chevy 2 dr. wagon

12-28-2009, 03:47 PM	#10
TLoz Registered User Join Date: Dec 2003 Location: Indy Posts: 326	Re: Arm rests, tach, reading light and inner fuzzy Scott, Sorry, but no can do on the light. It's $20 plus shipping. The shipping would be over $10. I would still need to box it up and take it 10 miles to have delivered. Thanks for the offer anyway. Regards, Tom

12-28-2009, 08:00 PM	#11
ScottH Senior Member Join Date: Sep 2002 Location: Hampstead, NC Posts: 8,190	Re: Arm rests, tach, reading light and inner fuzzy Tom, thanks for getting back to me. I figured it would fit in a $5 USPS flat rate box. Any chance u could get me a pick of the back (need to see how it mounts) and tell me the dimensions? Trying to see if it will work in an old van I have. Thanks. Scott __________________ 1963 C10 swb fleetside 1966 GMC G1000 Handi-bus (future project) 1955 Chevy 2 dr. wagon Last edited by ScottH; 12-28-2009 at 08:00 PM.

12-29-2009, 09:38 PM	#12
TLoz Registered User Join Date: Dec 2003 Location: Indy Posts: 326	Re: Arm rests, tach, reading light and inner fuzzy Scott, Please find attached a picture of the backside. The measurement is 8 3/4 X 2 7/8". It attaches using the 3 screws. The brown stuff you see is the headliner dust. Later, Tom Attached Images

12-29-2009, 11:35 PM	#13
ScottH Senior Member Join Date: Sep 2002 Location: Hampstead, NC Posts: 8,190	Re: Arm rests, tach, reading light and inner fuzzy Tom, thanks very much for the info. I'll take a look at the van tomorrow to see if it will work. Scott __________________ 1963 C10 swb fleetside 1966 GMC G1000 Handi-bus (future project) 1955 Chevy 2 dr. wagon

01-01-2010, 02:32 PM	#14
ScottH Senior Member Join Date: Sep 2002 Location: Hampstead, NC Posts: 8,190	Re: Arm rests, tach, reading light and inner fuzzy Tom, finally had a chance to do some measuring. Looks like it should work, how does $25 shipped sound (flat rate box)? Thanks Scott __________________ 1963 C10 swb fleetside 1966 GMC G1000 Handi-bus (future project) 1955 Chevy 2 dr. wagon

01-01-2010, 07:59 PM	#15
TLoz Registered User Join Date: Dec 2003 Location: Indy Posts: 326	Re: Arm rests, tach, reading light and inner fuzzy Scott, $25 sounds good. If it doesn't fit, just let me know and you can return it. PM me your address. Thanks, Tom



Register or Log In To remove these advertisements.

01-08-2010, 01:38 PM	#16
Eighty-6 Registered User Join Date: Jul 2008 Location: Round Rock, Tx Posts: 249	Re: Arm rests, tach, reading light and inner fuzzy Will the brown arm rests from the 88 fit 86 door panels? What condition are they in?

01-09-2010, 11:23 PM	#17
TLoz Registered User Join Date: Dec 2003 Location: Indy Posts: 326	Re: Arm rests, tach, reading light and inner fuzzy Eighty-6, The brown arm rests are in excellent condition. Problem is I don't believe that they will work on a 86. At least that is what the parts books show. These are off a suburban, don't know if they ran a year late or not. Anybody else know? Thanks, Tom

01-10-2010, 04:50 PM	#19
TLoz Registered User Join Date: Dec 2003 Location: Indy Posts: 326	Re: Arm rests, tach, reading light and inner fuzzy Would it help if I took some measurements and pics?

01-10-2010, 11:10 PM	#20
Eighty-6 Registered User Join Date: Jul 2008 Location: Round Rock, Tx Posts: 249	Re: Arm rests, tach, reading light and inner fuzzy If there's a chance they may fit pics would help. Thanks for your time.

01-12-2010, 09:37 PM	#21
TLoz Registered User Join Date: Dec 2003 Location: Indy Posts: 326	Re: Arm rests, tach, reading light and inner fuzzy Eighty-6, Here are some pics. Starting with the stud end the measurements are: end to stud 3 1/4 stud to hole 5 1/8 hole to hole 5 1/8 hole to end 3 5/8 overall length 17 1/4 Two colors brown and tan. No cracks or rips. If you want to try them, let me know. All my stuff can be returned if you're not happy. Thanks, Tom Attached Images

Register or Log In To remove these advertisements.