Headlights!?! - The 1947 - Present Chevrolet & GMC Truck Message Board Network

qu1cks1lver56 · 01-11-2010, 01:05 AM

OK so I got some H4 housings to replace my stock headlights (4 headlight model). And I'm not sure how they are supposed to light up, as in what combo they light up for highs/lows. My highbeam indicator is out so idk when it's really on highs LOL. The way it is, is when the top row is on bright, the bottom row is dim, and when the bottom row is bright the top row is dim. Is this the way it's supposed to be? I aimed the top ones for high beams and the bottoms for low beams. I guess it doesn't much matter since I'm going to rewire them when I get my HID's to where the top row is low beams and all 4 lights for high beams, but until then I would like them to be semi-right.

any help?

spinem · 01-11-2010, 02:56 AM

what year truck we talkn about?

qu1cks1lver56 · 01-11-2010, 11:46 PM

an 86

72 CustomCamper · 01-12-2010, 12:32 AM

Top row is low beam, bottom is high beam. On low beam should just be top row lit on high beam all 4 light up...

Chuck

qu1cks1lver56 · 01-12-2010, 12:51 AM

Alrighty, thanks. I guess I'll re aim them tomorrow night. I can't wait to get some HID's so I can hardwire them in and get rid of these 24 year old plastic harness plugs that are coming apart.

BLE 'BURBAN · 01-12-2010, 01:13 AM

yeah the top lamps are your low beams. but they have 2 filiments in them, one for low beam and one for high beam as where the bottom lamps have just a single filiment in them for the high beam circuit.

qu1cks1lver56 · 01-12-2010, 01:20 AM

well these arent the factory bulbs, theyre H4's in housings i put in there.
so both the top and bottom have 2 filaments in them. but it wont matter much longer, getting dual filament HID's for the top row and single's for the bottom and then I'll have plenty of light.

TheSunDanceKid · 01-12-2010, 04:50 PM

watch out on those factory plugs using the h4s they tend to heat up the plug and melt it specially if they are already jacked up ive always just switched them to these guys and they worked fine and never melted haha and on this site theyer 25cents a piece
http://www.frozencpu.com/products/18...Connector.html

qu1cks1lver56 · 01-13-2010, 01:31 AM

Yeah I figured I'd end up throwing some spades on there instead of the jacked up stock harness plugs. Even more so now since I know they'll try and melt on me.

I just can't wait to buy some HID's and get the ballasts hardwired in so I don't have to worry about a plug.

TheSunDanceKid · 01-13-2010, 06:40 PM

yea definatly a better plan i think it took like a week to melt them on my s10 but on my neighbors bike(cbr900) it took like a day

qu1cks1lver56 · 01-13-2010, 10:53 PM

Wow.
I might wanna get my stuff done soon then lol.

01-11-2010, 01:05 AM	#1
qu1cks1lver56 Registered User Join Date: Dec 2009 Location: Milton, FL Posts: 733	Headlights!?! OK so I got some H4 housings to replace my stock headlights (4 headlight model). And I'm not sure how they are supposed to light up, as in what combo they light up for highs/lows. My highbeam indicator is out so idk when it's really on highs LOL. The way it is, is when the top row is on bright, the bottom row is dim, and when the bottom row is bright the top row is dim. Is this the way it's supposed to be? I aimed the top ones for high beams and the bottoms for low beams. I guess it doesn't much matter since I'm going to rewire them when I get my HID's to where the top row is low beams and all 4 lights for high beams, but until then I would like them to be semi-right. any help?

01-11-2010, 02:56 AM	#2
spinem haha, ford guys... Join Date: Feb 2007 Location: Visalia, CA Posts: 576	Re: Headlights!?! what year truck we talkn about?

01-11-2010, 11:46 PM	#3
qu1cks1lver56 Registered User Join Date: Dec 2009 Location: Milton, FL Posts: 733	Re: Headlights!?! an 86

01-12-2010, 12:32 AM	#4
72 CustomCamper huh ??? Join Date: Nov 2002 Location: Fredericksburg,Va. Posts: 3,368	Re: Headlights!?! Top row is low beam, bottom is high beam. On low beam should just be top row lit on high beam all 4 light up... Chuck __________________ 90 Blazer Silverado 350w/ 700R4 and 32" Kelly's "I am a bomb technician. If you see me running try to keep up!" Last edited by 72 CustomCamper; 01-12-2010 at 12:33 AM.

01-12-2010, 12:51 AM	#5
qu1cks1lver56 Registered User Join Date: Dec 2009 Location: Milton, FL Posts: 733	Re: Headlights!?! Alrighty, thanks. I guess I'll re aim them tomorrow night. I can't wait to get some HID's so I can hardwire them in and get rid of these 24 year old plastic harness plugs that are coming apart.

01-12-2010, 01:13 AM	#6
BLE 'BURBAN In the Forgotten far North. Join Date: Jul 2007 Location: Anchorage, Alaska Posts: 2,627	Re: Headlights!?! yeah the top lamps are your low beams. but they have 2 filiments in them, one for low beam and one for high beam as where the bottom lamps have just a single filiment in them for the high beam circuit. __________________ 1987 R3500 CREW CAB DUALLY (BIG RED)Acquired 06/12/2015 1990 chevy suburban V2500 5.7L My cluster Mods-Nov 2007 overhead console Stereo install Round 2 Aug 2009 Heated/turn signal mirror upgrade

01-12-2010, 01:20 AM	#7
qu1cks1lver56 Registered User Join Date: Dec 2009 Location: Milton, FL Posts: 733	Re: Headlights!?! well these arent the factory bulbs, theyre H4's in housings i put in there. so both the top and bottom have 2 filaments in them. but it wont matter much longer, getting dual filament HID's for the top row and single's for the bottom and then I'll have plenty of light.

01-12-2010, 04:50 PM	#8
TheSunDanceKid Registered User Join Date: Aug 2009 Location: chandler, arizona Posts: 125	Re: Headlights!?! watch out on those factory plugs using the h4s they tend to heat up the plug and melt it specially if they are already jacked up ive always just switched them to these guys and they worked fine and never melted haha and on this site theyer 25cents a piece http://www.frozencpu.com/products/18...Connector.html

01-13-2010, 01:31 AM	#9
qu1cks1lver56 Registered User Join Date: Dec 2009 Location: Milton, FL Posts: 733	Re: Headlights!?! Yeah I figured I'd end up throwing some spades on there instead of the jacked up stock harness plugs. Even more so now since I know they'll try and melt on me. I just can't wait to buy some HID's and get the ballasts hardwired in so I don't have to worry about a plug.

01-13-2010, 06:40 PM	#10
TheSunDanceKid Registered User Join Date: Aug 2009 Location: chandler, arizona Posts: 125	Re: Headlights!?! yea definatly a better plan i think it took like a week to melt them on my s10 but on my neighbors bike(cbr900) it took like a day

01-13-2010, 10:53 PM	#11
qu1cks1lver56 Registered User Join Date: Dec 2009 Location: Milton, FL Posts: 733	Re: Headlights!?! Wow. I might wanna get my stuff done soon then lol.



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.