original Blazer rollbar specs - The 1947 - Present Chevrolet & GMC Truck Message Board Network

**Shock_Me** · 01-20-2010, 10:07 AM

Can someone with an original 69-72 Blazer rollbar please tell me the pipe diameter, and maybe the height, (from floor to top of bar)?
I can probably figure out the angles of the bends but the angle of the support legs and thier length would be a big help.

Thanks
Pete

Firebirdjones · 01-20-2010, 05:09 PM

Mine has a bar diameter of 1 5/8 inches. The height is 41 1/2 inches from the floor.
Here are a couple of pics of the Hickey Enterprises part number stenciled on the top side. Also after it was painted to give you an idea of how it is constructed.
I've seen others where the down bars go straight back before heading down towards the floor. As you can see mine isn't like that.

While I'm in here,,,here are a couple shots that show somewhat how it's mounted on the tire well. I wasn't originally trying to take a picture of this, but you can see it none the less.

Hope that helps.

scoyote · 01-20-2010, 07:47 PM

Mine looks just like that one.
Not sure if mine is a factory or not, the welds are sorta suspect but it looks exactly like that one.

Hey Firebird....is that a 70 Chevelle and a pair of Cragar SS mags in the background?

**71blksuper4x4** · 01-20-2010, 07:58 PM

Looks good firebird, I know you were asking about those seat covers awhile back. They look great.

Coyote, those aren't Cragers from the pic, and that is a 72' Chevelle or El camino. The 70's have 2 lights on each side of the grille. 71' has split turn signal lights. Trevor

**Shock_Me** · 01-21-2010, 06:20 AM

thanks Firebird. That'll work for me.

Pete

Firebirdjones · 01-21-2010, 03:02 PM

Quote:

Originally Posted by scoyote

Mine looks just like that one.
Not sure if mine is a factory or not, the welds are sorta suspect but it looks exactly like that one.

Hey Firebird....is that a 70 Chevelle and a pair of Cragar SS mags in the background?

Trevor is correct. Thats a 72 SS 454 I've had for 25 years.

Cragars?? Close, they are Torque Thrust II's that I run on that chevelle. I had them off to mount some new rubber and just haven't gotten around to putting them back on yet.

Firebirdjones · 01-21-2010, 03:08 PM

Quote:

Originally Posted by 71blksuper4x4

Looks good firebird, I know you were asking about those seat covers awhile back. They look great. Trevor

Thanks, I'm happy with them. Really brightened up the inside.

01-20-2010, 10:07 AM	#1
Shock_Me Senior Member Join Date: May 2005 Location: New Brunswick, Canada Posts: 591	original Blazer rollbar specs Can someone with an original 69-72 Blazer rollbar please tell me the pipe diameter, and maybe the height, (from floor to top of bar)? I can probably figure out the angles of the bends but the angle of the support legs and thier length would be a big help. Thanks Pete

01-20-2010, 05:09 PM	#2
Firebirdjones Registered User Join Date: Oct 2009 Location: Prescott, Arizona Posts: 2,396	Re: original Blazer rollbar specs Mine has a bar diameter of 1 5/8 inches. The height is 41 1/2 inches from the floor. Here are a couple of pics of the Hickey Enterprises part number stenciled on the top side. Also after it was painted to give you an idea of how it is constructed. I've seen others where the down bars go straight back before heading down towards the floor. As you can see mine isn't like that. While I'm in here,,,here are a couple shots that show somewhat how it's mounted on the tire well. I wasn't originally trying to take a picture of this, but you can see it none the less. Hope that helps.

01-20-2010, 07:47 PM	#3
scoyote Registered User Join Date: Oct 2008 Location: On the shores of Bull Shoals, AR Posts: 509	Re: original Blazer rollbar specs Mine looks just like that one. Not sure if mine is a factory or not, the welds are sorta suspect but it looks exactly like that one. Hey Firebird....is that a 70 Chevelle and a pair of Cragar SS mags in the background? __________________ 1972 Blazer - Bronco Orange - In the werks http://67-72chevytrucks.com/vboard/s...d.php?t=323444 1991 F250 - Hunting truck w/ Detroit rear locker, ARB front locker, front and rear winches .... and more.... 1997 Grand Cherokee - fun jeep - Detroit rear locker, ARB front locker, front winch, 411 gears, lots of lights ;-) 2004 Hot Rod DuraMax - Dnyo'd at the wheels with 525 HP and 1100 lbs torque.....mustang killer.

01-20-2010, 07:58 PM	#4
71blksuper4x4 SWB 4x4 Collector Join Date: Jun 2001 Location: Osage City, KS Posts: 5,156	Re: original Blazer rollbar specs Looks good firebird, I know you were asking about those seat covers awhile back. They look great. Coyote, those aren't Cragers from the pic, and that is a 72' Chevelle or El camino. The 70's have 2 lights on each side of the grille. 71' has split turn signal lights. Trevor __________________ TREVOR 1970 CST swb 4x4 (speedwarning,cruise,tilt,tach,8track, original red shoulder belts,tow hooks) 1972 Jimmy (soon to be Hickey cloned) 1971 Cheyenne Super 4x4 swb (tilt,tach,buckets, original blue shoulder belts,am/fm,cruise,tow hooks, dealer 8 track) 1972 Cheyenne Super K20 4x4 Custom Camper (tilt, tach, am/fm, tow hooks, bed toolbox, aux gas tank 1972 Cheyenne Super Crew Cab K30 4x4 Duramax, Allison, np205, buckets, tow hooks (CURRENT PROJECT) http://67-72chevytrucks.com/vboard/s...d.php?t=624819 1989 V3500 Crew Cab (454tbi, NV4500, np205) 1970 Chevelle SS (LS5 454,th400,8track,buckets,tach) :2004 Jeep Wrangler Rubicon (daily driver) WTB: 1968-70 Cruise Control Lever

01-21-2010, 06:20 AM	#5
Shock_Me Senior Member Join Date: May 2005 Location: New Brunswick, Canada Posts: 591	Re: original Blazer rollbar specs thanks Firebird. That'll work for me. Pete



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.