CA 71 GMC parting out - The 1947 - Present Chevrolet & GMC Truck Message Board Network

**jerry moss** · 01-24-2010, 01:08 AM

local sales only since i have no pics- my computer crashed and i lost everything and have to try relearning how to do pics. but if you are local and want to look at it you're welcome to come look at it. here's the info:71 GMC 2500 2wd, no motor, trans is in the bed, right inner and outer fender is junk.
#1-left front fender-$60.00 SOLD
#2-doors-$50.00 each extra mirror holes and 6" speaker holes,not rotted-SOLD
#3-small block p-s pump and brackets with pully-$40.00 SOLD
#4-small block engine stands-$20.00
#5-auto crossmember-$30.00
#6-chrome grille-$80.00 complete,one small dent in center bar-SOLD
#7-cab-$50.00 needs rockers and???-SOLD
the truck is pretty much complete so if you need little stuff it might be there still. i just hauled it home today and haven't gone over it real close yet since our weather is crappy out her in sunny california-it's rained every day since monday,yuk.
I was just underneath the cab between showers and the under side looks very solid, cab supports and floor look to be in very good shape so it appears a set of rockers and it would be a nice cab.

dazza · 01-24-2010, 02:35 AM

Jerry,
Do you know if it has either of these?
Thanks

*Sublvr72* · 01-24-2010, 03:57 AM

I'm interested in the PS pump and the auto crossmember.

66coffin · 01-24-2010, 06:36 AM

do you have the rear end for sale?

budnikguy · 01-24-2010, 10:44 AM

if Jerry Moss cannot help you. I have a rear end out of a 69 GMC 2500 2wd that I will be disassembling starting on Monday if you are interested...PM me.

Quote:

Originally Posted by 66coffin

do you have the rear end for sale?

**jerry moss** · 01-24-2010, 11:30 AM

Quote:

Originally Posted by 66coffin

do you have the rear end for sale?

it has the leaf spring dana 60 under it $50.00, i haven't been under it to check for a ratio tag but since nothing is listed on the SPID i would assume it has 4:10s

**jerry moss** · 01-24-2010, 11:31 AM

Quote:

Originally Posted by Sublvr72

I'm interested in the PS pump and the auto crossmember.

i'm in the "other" brentwood-up in nor cal.

**jerry moss** · 01-24-2010, 11:32 AM

Quote:

Originally Posted by dazza

Jerry,
Do you know if it has either of these?
Thanks

"these" ?????

dazza · 01-24-2010, 12:30 PM

Sorry. forgot the link...

http://67-72chevytrucks.com/vboard/s...d.php?t=382043

**jerry moss** · 01-24-2010, 05:03 PM

Quote:

Originally Posted by dazza

Sorry. forgot the link...

http://67-72chevytrucks.com/vboard/s...d.php?t=382043

P.M. sent

sleepertruck72 · 01-24-2010, 09:07 PM

Interested in the cab. Any pics available ? Also, is the tranny for sale, if so how much ? Thanks.

**jerry moss** · 01-25-2010, 12:42 AM

Quote:

Originally Posted by sleepertruck72

Interested in the cab. Any pics available ? Also, is the tranny for sale, if so how much ? Thanks.

sorry i have no pics available, my computer crashed and everything had to be wiped clean and start over with a blank slate. i have to find the disc for my camera and see if i can remember how to do pics. the trans i have no idea on condition so you can have it free.

sleepertruck72 · 01-25-2010, 01:13 AM

Jerry,
No problem about the pics, most of the time my camera has a dead battery, or my wife hides it from me to keep me busy looking for it

I will make the trip over there PM sent

1971gmcshortbed · 01-25-2010, 01:36 AM

Do you have the GMC outer grille trim pieces? The ones that go on the fender, I need left and right.

**special-K** · 01-25-2010, 04:44 PM

How about a 4-eyed headlamp harness to 21771,if you have one?

**jerry moss** · 01-25-2010, 09:35 PM

Quote:

Originally Posted by 1971gmcshortbed

Do you have the GMC outer grille trim pieces? The ones that go on the fender, I need left and right.

they are there but i'd like to sell them with the grille. if no interest in the whole set up i'll let you know.

**jerry moss** · 01-25-2010, 09:38 PM

Quote:

Originally Posted by special-K

How about a 4-eyed headlamp harness to 21771,if you have one?

Tim,
the harness is there, i'll have to check on condition. hopefully our crappy weather will clear out before the weekend so i can get out there and work on stripping it out. i pulled the fenders, grille and some interior pieces between showers yesterday but didn't pull the underhood harness.

**special-K** · 01-25-2010, 09:42 PM

No hurry.

Chevy57-69 · 01-29-2010, 01:40 AM

Jerry
Do you have the rear leaf spring hangers-if so what do you want for them including shipping to 49707 Thanks Ron

**D.PASSMORE** · 01-29-2010, 08:31 AM

Jerry, does the left fender have upper and lower trim holes. Will you ship? Intrested. Thanks David

**jerry moss** · 01-29-2010, 11:01 AM

Quote:

Originally Posted by Chevy57-69

Jerry
Do you have the rear leaf spring hangers-if so what do you want for them including shipping to 49707 Thanks Ron

Ron,
the entire frame is still in one piece, i have to keep it a rolling frame to dispose of the hulk. i will speak with the person that will be hauling it away and see if it's possible to get them back- i live in town and have limited space to tear a truck apart.

**jerry moss** · 01-29-2010, 11:05 AM

Quote:

Originally Posted by D.PASSMORE

Jerry, does the left fender have upper and lower trim holes. Will you ship? Intrested. Thanks David

Dave,
it has no trim holes now but according to the SPID it originally had lower trim only. i will check to see if it's a replacement or just had the holes welded up.

duceducenine · 01-29-2010, 12:22 PM

im interested in the cab..and doors
maybe grill- put me in line!

**jerry moss** · 01-30-2010, 12:58 AM

Quote:

Originally Posted by duceducenine

im interested in the cab..and doors
maybe grill- put me in line!

P.M. sent

**jerry moss** · 01-31-2010, 11:42 AM

Quote:

Originally Posted by D.PASSMORE

Jerry, does the left fender have upper and lower trim holes. Will you ship? Intrested. Thanks David

Dave, the fender has no holes except the emblem so either it's a replacement or the glovebox door has been changed-i never compared the VIN on the glovebox to the cab.

01-24-2010, 12:30 PM	#9
dazza Registered User Join Date: Aug 2002 Location: California Posts: 971	Re: 71 GMC parting out Sorry. forgot the link... http://67-72chevytrucks.com/vboard/s...d.php?t=382043 __________________ --------------------------------------------------------- I'm not crazy, I'm chosen, there's a difference. ---------------------------- '72 K10 SWB, 350, sm465/np205 ---- ----

01-24-2010, 09:07 PM	#11
sleepertruck72 Registered User Join Date: Nov 2007 Location: Turlock California 95380 Posts: 2,075	Re: 71 GMC parting out Interested in the cab. Any pics available ? Also, is the tranny for sale, if so how much ? Thanks. __________________ 72 C20 Longbed 05 1500 Z71

01-25-2010, 01:13 AM	#13
sleepertruck72 Registered User Join Date: Nov 2007 Location: Turlock California 95380 Posts: 2,075	Re: 71 GMC parting out Jerry, No problem about the pics, most of the time my camera has a dead battery, or my wife hides it from me to keep me busy looking for it I will make the trip over there PM sent __________________ 72 C20 Longbed 05 1500 Z71

01-25-2010, 01:36 AM	#14
1971gmcshortbed Registered User Join Date: Jul 2003 Location: Las Cruces, NM Posts: 284	Re: 71 GMC parting out Do you have the GMC outer grille trim pieces? The ones that go on the fender, I need left and right.

01-25-2010, 04:44 PM	#15
special-K Special Order Join Date: Nov 2004 Location: Mt Airy, MD Posts: 85,852	Re: 71 GMC parting out How about a 4-eyed headlamp harness to 21771,if you have one? __________________ "BUILDING A BETTER WAY TO SERVE THE USA"......67/72......"The New Breed" GMC '67 C1500 Wideside Super Custom SWB: 327/M22/3.42 posi.........."The '67" (project) GMC '72 K2500 Wideside Sierra Custom Camper: 350/TH350/4.10 Power-Lok..."The '72" (rolling) Tim "Don't call me a redneck. I'm a rough cut country gentleman" R.I.P. ~ East Side Low Life ~ El Jay ~ 72BLUZ ~ Fasteddie69 ~ Ron586 ~ 67ChevyRedneck ~ Grumpy Old Man ~

01-24-2010, 01:08 AM	#1
jerry moss Born Psycho Join Date: Feb 2001 Location: brentwood,cal,usa Posts: 4,916	71 GMC parting out local sales only since i have no pics- my computer crashed and i lost everything and have to try relearning how to do pics. but if you are local and want to look at it you're welcome to come look at it. here's the info:71 GMC 2500 2wd, no motor, trans is in the bed, right inner and outer fender is junk. #1-left front fender-$60.00 SOLD #2-doors-$50.00 each extra mirror holes and 6" speaker holes,not rotted-SOLD #3-small block p-s pump and brackets with pully-$40.00 SOLD #4-small block engine stands-$20.00 #5-auto crossmember-$30.00 #6-chrome grille-$80.00 complete,one small dent in center bar-SOLD #7-cab-$50.00 needs rockers and???-SOLD the truck is pretty much complete so if you need little stuff it might be there still. i just hauled it home today and haven't gone over it real close yet since our weather is crappy out her in sunny california-it's rained every day since monday,yuk. I was just underneath the cab between showers and the under side looks very solid, cab supports and floor look to be in very good shape so it appears a set of rockers and it would be a nice cab. __________________ jerry moss 72 cheyenne super K20- tilt,tach,vacuum,speedwarning,buckets,shoulder belts,am/fm,tow hooks,bumper guards,toolbox,aux. fuel tank,posi front and rear,plus other goodies!!! SOLD 69 suburban K20-tilt,tach,vacuum,speedwarning,buckets,shoulder belts,am/fm,4 inch all spring lift,4 speed, 14 bolt full floater, dana 44 HD,warn winch,posi front and rear,tow hooks,plus other goodies. 73/80 chevy/gmc K20 SB400,turbo 400,205,tilt,a-c,gas hog. 77 K/5 cheyenne blazer-daily driver/beater. SON HAS IT NOW BRENTWOOD,CALIFORNIA Last edited by jerry moss; 02-01-2010 at 11:37 AM. Reason: added info on cab

01-24-2010, 02:35 AM	#2
dazza Registered User Join Date: Aug 2002 Location: California Posts: 971	Re: 71 GMC parting out Jerry, Do you know if it has either of these? Thanks __________________ --------------------------------------------------------- I'm not crazy, I'm chosen, there's a difference. ---------------------------- '72 K10 SWB, 350, sm465/np205 ---- ----

01-24-2010, 03:57 AM	#3
Sublvr72 Account Suspended Join Date: May 2004 Location: Simi Valley, CA Posts: 1,387	Re: 71 GMC parting out I'm interested in the PS pump and the auto crossmember.

01-24-2010, 06:36 AM	#4
66coffin Registered User Join Date: Dec 2009 Location: diamond bar, calif. Posts: 206	Re: 71 GMC parting out do you have the rear end for sale? __________________ '66 c10ish straight 292 power!

01-25-2010, 09:42 PM	#18
special-K Special Order Join Date: Nov 2004 Location: Mt Airy, MD Posts: 85,852	Re: 71 GMC parting out No hurry. __________________ "BUILDING A BETTER WAY TO SERVE THE USA"......67/72......"The New Breed" GMC '67 C1500 Wideside Super Custom SWB: 327/M22/3.42 posi.........."The '67" (project) GMC '72 K2500 Wideside Sierra Custom Camper: 350/TH350/4.10 Power-Lok..."The '72" (rolling) Tim "Don't call me a redneck. I'm a rough cut country gentleman" R.I.P. ~ East Side Low Life ~ El Jay ~ 72BLUZ ~ Fasteddie69 ~ Ron586 ~ 67ChevyRedneck ~ Grumpy Old Man ~

01-29-2010, 01:40 AM	#19
Chevy57-69 Registered User Join Date: Dec 2009 Location: Alpena, Mich. Posts: 9	Re: 71 GMC parting out Jerry Do you have the rear leaf spring hangers-if so what do you want for them including shipping to 49707 Thanks Ron

01-29-2010, 08:31 AM	#20
D.PASSMORE One of the First Join Date: Jan 2000 Location: St. Augustine,FL. Posts: 4,054	Re: 71 GMC parting out Jerry, does the left fender have upper and lower trim holes. Will you ship? Intrested. Thanks David

01-29-2010, 12:22 PM	#23
duceducenine Registered User Join Date: Nov 2006 Location: el sobrante CA 94803 Posts: 284	Re: 71 GMC parting out im interested in the cab..and doors maybe grill- put me in line!



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.