looking for... - The 1947 - Present Chevrolet & GMC Truck Message Board Network

chevoholic72 · 04-29-2003, 07:31 PM

My buddy has a 1978 3/4 chevy 4x4 pickup, and on one of our last trips the passengerside bearings blewout and mangled the spindle. We cant locate one around us at all. So if anyone has one for sale we would be interested. I have all the diminsions of the original. Thanks.

trixter99 · 04-30-2003, 12:08 AM

What size of front diff is it ? Because 1/2 ton spindles are the same as light 3/4 tons spindles, I just switched my 1/2 ton to 3/4 ton diffs last fall.And I used my old spindles on the 3/4 diffs............Darcy

ric · 04-30-2003, 11:55 AM

I have an entire 83 K20 rolling chassis bumper to bumper with power train I'll sell as a parts truck for that 78.

I live about 3 hours North of Cincy.

ric

chevoholic72 · 05-01-2003, 08:52 AM

Ric, my buddy might be interested in that chassis. How much are you asking for it?

ric · 05-01-2003, 11:37 AM

This has an front bumper, running 350 4bbl with new headers, 4spd, NP208, rear end, rear step bumper, tanks, four wheels and tires, all inflated. And an extra 4spd and NP208.

This was running K20 last Summer. The cab, front end and bed were so rusted they wiggled on the frame when you drove it.

I'd like to get $750 for everything.

ric

04-29-2003, 07:31 PM	#1
chevoholic72 Registered User Join Date: Dec 2000 Location: cincinnati, Ohio, USA Posts: 80	looking for... My buddy has a 1978 3/4 chevy 4x4 pickup, and on one of our last trips the passengerside bearings blewout and mangled the spindle. We cant locate one around us at all. So if anyone has one for sale we would be interested. I have all the diminsions of the original. Thanks. Attached Images __________________ http://www.joeschevytruck.20m.com '72 Chevy C-10. In POS mode. BRONZE!!!!! '72 GMC Jimmy. Good driver, all stock. Grapefruit yellow '74 Norton Commando SWEET RIDE!!!!!!!

04-30-2003, 12:08 AM	#2
trixter99 I have no time for this Join Date: Dec 2002 Location: Fort St John B.C. CANADA Posts: 434	What size of front diff is it ? Because 1/2 ton spindles are the same as light 3/4 tons spindles, I just switched my 1/2 ton to 3/4 ton diffs last fall.And I used my old spindles on the 3/4 diffs............Darcy __________________ 1986 Chevy short box ( PROJECT ) 1994 Chevy Blazer lifted 6" 2009 Gmc 2500 HD 1999 Hugger orange Camaro SS 2007 BMW X5 Sport

05-01-2003, 08:52 AM	#4
chevoholic72 Registered User Join Date: Dec 2000 Location: cincinnati, Ohio, USA Posts: 80	Ric, my buddy might be interested in that chassis. How much are you asking for it? __________________ http://www.joeschevytruck.20m.com '72 Chevy C-10. In POS mode. BRONZE!!!!! '72 GMC Jimmy. Good driver, all stock. Grapefruit yellow '74 Norton Commando SWEET RIDE!!!!!!!

04-30-2003, 11:55 AM	#3
ric Registered User Join Date: Dec 2001 Location: NorthOfColumbusOhio Posts: 219	I have an entire 83 K20 rolling chassis bumper to bumper with power train I'll sell as a parts truck for that 78. I live about 3 hours North of Cincy. ric

05-01-2003, 11:37 AM	#5
ric Registered User Join Date: Dec 2001 Location: NorthOfColumbusOhio Posts: 219	This has an front bumper, running 350 4bbl with new headers, 4spd, NP208, rear end, rear step bumper, tanks, four wheels and tires, all inflated. And an extra 4spd and NP208. This was running K20 last Summer. The cab, front end and bed were so rusted they wiggled on the frame when you drove it. I'd like to get $750 for everything. ric



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.