rear setups - The 1947 - Present Chevrolet & GMC Truck Message Board Network

1low82 · 01-27-2010, 09:15 PM

iam looking to bag the rear of my ol pick-em-up and just wondering how everyone else was doing there, and here is a updated pic of my truck hope you guys like it

78-5.3 · 01-27-2010, 09:35 PM

how could the tire lean be eliminated and still sit low ? ive seen some trucks low and not have as much of a lean?

MR .T · 01-27-2010, 09:41 PM

different control arm geometry.

1low82 · 01-27-2010, 09:49 PM

drop spindles , i just have it bagged on stock spindles

smashingchuck · 01-27-2010, 09:52 PM

Check my build thread for pics.

Chlsnk · 01-28-2010, 10:31 PM

GREAT to see you are still around on this site I was looking for your old thread from when you first bagged your front end the other day. Looks like you've ditched the flames for primer? I actually like the tire lean.

Rollinsqrbdy · 01-28-2010, 10:33 PM

wow it dont even look like the same truck

**N2TRUX** · 01-28-2010, 10:37 PM

Quote:

Originally Posted by Chlsnk

.... I actually like the tire lean.

Strange tastes or what?

How low are you going in the rear? Do you plan a c-notch or step notch? Are you considering an AOL or link system?

Please buy some spindles before you bag the rear. That looks terrible with that much negative camber considering how low you are.

Chlsnk · 01-28-2010, 10:39 PM

Quote:

Originally Posted by N2TRUX

Strange tastes or what?

How low are you going in the rear? Do you plan a c-notch or step notch? Are you considering an AOL or link system?

I wouldn't like to drive it like that just if it was parked like lets say at a car show your are all layed out.

**N2TRUX** · 01-28-2010, 10:42 PM

That is not "all layed out". That is an system that is in dire need of correction. I don't mean to be critical, but a properly lowered truck does not have that much negative camber.

Chlsnk · 01-28-2010, 10:55 PM

To me this truck has the perfect negative camber for me to look at. It may not be correct but I like the way it looks. The camber on the OP's truck is drastic the more I look at it. N2TRUX what causes this extreme negative camber? Besides drop spindles how can the extreme negative camber be avoidied? How does a drop spindle fix this? Is some always to be expected with a bagged set up?

I want to bag the front of my truck so I can be low when I want to be low but lift it up if need be.

oldschool18 · 01-29-2010, 12:45 PM

I think my spindles 2.5 lowering and I still have leen when its laid down, If you want to correct this you need new control arms, and check out your upper ball joint I bet its at a sharp angle to I know mine is.........Heres some pics of my bagged c-notch Name: 4 link 15.jpg
Views: 332
Size: 75.8 KB

Name: 4 link 15.jpg
Views: 332
Size: 75.8 KB

Name: 4 link 13.jpg
Views: 322
Size: 79.0 KB

Name: 4 link 9.jpg
Views: 324
Size: 71.5 KB

Name: 4 link 7.jpg
Views: 320
Size: 65.7 KB

smashingchuck · 01-29-2010, 01:14 PM

The cause is a shorter upper control arm. Scott's Hot Rods has just what you need to fix it.

LONGHAIR · 01-29-2010, 02:12 PM

Quote:

Originally Posted by Chlsnk

How does a drop spindle fix this?

Dropped spindles allow the truck to sit lower with less suspension travel. Less travel automatically means less negative camber gain. This does not "solve" the geometry issue, but it means less to overcome.

CHROMAHOLIC · 01-29-2010, 03:16 PM

Porterbuilt is the way to go for no tire lean....

1low82 · 01-29-2010, 07:51 PM

i thought this tread was about pics of rear bag setups , lol but i guess not

staggerd86c-10 · 01-31-2010, 01:29 AM

I would like to know more about practical AOL setups for the rear. Some of us have budgets we have to stay in.

smashingchuck · 01-31-2010, 11:54 AM

Quote:

Originally Posted by 1low82

i thought this tread was about pics of rear bag setups , lol but i guess not

let's get specific. What are your goals?

thrtsxchambers · 01-31-2010, 01:59 PM

Quote:

Originally Posted by smashingchuck

let's get specific. What are your goals?

x2. What do you want to do, lay frame, lay low? What kind of budget, are you looking to make your own system or buy a full kit? I went with a bolt on kit because I am still learning to weld and didn't want to trust my life on a amateur weld. The rear kit is from kp components, that is why we are asking budget this kit was not the cheapest option.
Also about the lean, drop spindles would help some but also modifying the c arms are get new ones would fix it.

1low82 · 01-31-2010, 10:01 PM

well, i dunno getting some ideals on rear setups, some of my buddies have 2 links with pan hard bars ,and i didnt know what i wanted to do, iam on a budget so, and iam not to worried about the tire lean beacuse with a lil corrects the problem ,i cant drive it that low as it sits in the pic because the crossmember is on the ground ..

paul66c10 · 02-01-2010, 04:33 PM

Quote:

Originally Posted by CHROMAHOLIC

Porterbuilt is the way to go for no tire lean....

have any pics of it raised? would like to know how much lift it has with the 22's thanks

1low82 · 02-01-2010, 08:31 PM

i have a fair amount of lift , those are 20" by the way

1low82 · 02-02-2010, 08:50 PM

here it is beside the daily

01-27-2010, 09:15 PM	#1
1low82 Registered User Join Date: Oct 2008 Location: mayking, kentucky Posts: 33	rear setups iam looking to bag the rear of my ol pick-em-up and just wondering how everyone else was doing there, and here is a updated pic of my truck hope you guys like it Attached Images __________________ 82 c/10 project 03 silverado daily

01-27-2010, 09:35 PM	#2
78-5.3 Registered User Join Date: Oct 2009 Location: Waterboro ,MAINE Posts: 547	Re: rear setups how could the tire lean be eliminated and still sit low ? ive seen some trucks low and not have as much of a lean? __________________ 78 C-10 5.3 LSX -4L60E

01-27-2010, 09:41 PM	#3
MR .T Registered User Join Date: Jan 2010 Location: Kitchener, Ontario, Canada Posts: 94	Re: rear setups different control arm geometry.

01-27-2010, 09:49 PM	#4
1low82 Registered User Join Date: Oct 2008 Location: mayking, kentucky Posts: 33	Re: rear setups drop spindles , i just have it bagged on stock spindles __________________ 82 c/10 project 03 silverado daily

01-27-2010, 09:52 PM	#5
smashingchuck It'd be alot cooler if you did Join Date: May 2003 Location: Three Rivers, MI Posts: 2,345	Re: rear setups Check my build thread for pics. __________________ 78 Build Thread 4Runner Build

01-28-2010, 10:31 PM	#6
Chlsnk Registered User Join Date: Jan 2009 Location: Kansas city Posts: 756	Re: rear setups GREAT to see you are still around on this site I was looking for your old thread from when you first bagged your front end the other day. Looks like you've ditched the flames for primer? I actually like the tire lean. __________________ *My 84 short bed build up*** http://67-72chevytrucks.com/vboard/s...68#post3481968 Last edited by Chlsnk; 01-28-2010 at 10:33 PM.

01-28-2010, 10:33 PM	#7
Rollinsqrbdy Registered User Join Date: Aug 2008 Location: Dexter, N.M. Posts: 1,082	Re: rear setups wow it dont even look like the same truck __________________ Its Kool to be a square 2013 Chevy Silverado Z71 w/ 7" lift and 35" Nitto's 1985 C-10 ......My dream truck (under construction) 1984 k 10 Silverado...6" lift with 38.5 super swampers New Mexico Member --- Member of the Square Body Club---

01-28-2010, 10:42 PM	#10
N2TRUX Happy to be here Join Date: Mar 2000 Location: Cypress, TX Posts: 39,023	Re: rear setups That is not "all layed out". That is an system that is in dire need of correction. I don't mean to be critical, but a properly lowered truck does not have that much negative camber. __________________ Follow me on Facebook and Instagram @N2trux.com Articles- "Jake" the 84 to 74 crewcab "Elwood" the77_Remix 85 GMC Sierra "Scarlett" "Refining Sierra"

01-28-2010, 10:55 PM	#11
Chlsnk Registered User Join Date: Jan 2009 Location: Kansas city Posts: 756	Re: rear setups To me this truck has the perfect negative camber for me to look at. It may not be correct but I like the way it looks. The camber on the OP's truck is drastic the more I look at it. N2TRUX what causes this extreme negative camber? Besides drop spindles how can the extreme negative camber be avoidied? How does a drop spindle fix this? Is some always to be expected with a bagged set up? I want to bag the front of my truck so I can be low when I want to be low but lift it up if need be. Attached Images __________________ *My 84 short bed build up*** http://67-72chevytrucks.com/vboard/s...68#post3481968 Last edited by Chlsnk; 01-28-2010 at 10:58 PM.

01-29-2010, 12:45 PM	#12
oldschool18 Registered User Join Date: Jan 2010 Location: Hollidaysburg, PA Posts: 785	Re: rear setups I think my spindles 2.5 lowering and I still have leen when its laid down, If you want to correct this you need new control arms, and check out your upper ball joint I bet its at a sharp angle to I know mine is.........Heres some pics of my bagged c-notch

01-29-2010, 01:14 PM	#13
smashingchuck It'd be alot cooler if you did Join Date: May 2003 Location: Three Rivers, MI Posts: 2,345	Re: rear setups The cause is a shorter upper control arm. Scott's Hot Rods has just what you need to fix it. __________________ 78 Build Thread 4Runner Build

01-29-2010, 03:16 PM	#15
CHROMAHOLIC Registered User Join Date: May 2009 Location: Ontario, Canada Posts: 795	Re: rear setups Porterbuilt is the way to go for no tire lean.... Attached Images

01-29-2010, 07:51 PM	#16
1low82 Registered User Join Date: Oct 2008 Location: mayking, kentucky Posts: 33	Re: rear setups i thought this tread was about pics of rear bag setups , lol but i guess not __________________ 82 c/10 project 03 silverado daily

01-31-2010, 01:29 AM	#17
staggerd86c-10 Squarebody Aficionado Join Date: May 2008 Location: Miami, FL Posts: 713	Re: rear setups I would like to know more about practical AOL setups for the rear. Some of us have budgets we have to stay in.

01-31-2010, 10:01 PM	#20
1low82 Registered User Join Date: Oct 2008 Location: mayking, kentucky Posts: 33	Re: rear setups well, i dunno getting some ideals on rear setups, some of my buddies have 2 links with pan hard bars ,and i didnt know what i wanted to do, iam on a budget so, and iam not to worried about the tire lean beacuse with a lil corrects the problem ,i cant drive it that low as it sits in the pic because the crossmember is on the ground .. __________________ 82 c/10 project 03 silverado daily



Register or Log In To remove these advertisements.

02-01-2010, 08:31 PM	#22
1low82 Registered User Join Date: Oct 2008 Location: mayking, kentucky Posts: 33	Re: rear setups i have a fair amount of lift , those are 20" by the way Attached Images __________________ 82 c/10 project 03 silverado daily

02-02-2010, 08:50 PM	#23
1low82 Registered User Join Date: Oct 2008 Location: mayking, kentucky Posts: 33	Re: rear setups here it is beside the daily Attached Images __________________ 82 c/10 project 03 silverado daily

Register or Log In To remove these advertisements.