Oil pan - The 1947 - Present Chevrolet & GMC Truck Message Board Network

MSL · 05-01-2003, 11:23 PM

Dang i was looking on summit theres no way i can afford a 200 to even a 100 dollar oil pan. so what is cheaper but better than the stocker. or is there.lol

Thanks

CT-Truckster · 05-02-2003, 12:32 AM

well what ever you do don't the 40$ chrome oil pan like they sell at autozone. i just put one on a 383 i'm building for a freind. he wanted a chrome oil pan and i tried to talk him out of buying that one but he said thats all he could afford. well i didn't fit worth a crap. the side of the pan where bowed in just enough for the crank to rub on the sides of the pan. took a rubber hammer beat it out a little to clear the crank then i had to drill the holes out a little cause they didn't line up good enough with the holes in the block to get the bolts in. and know it's gonna leak cause it's not a good fit around the timing cover or the the rear main. i'm still trying to talk him into getting a decent pan before we put it in the car. i told him when the oil starts pouring out don't come cryin to me. he's like well maybe i can take that one back, yeah after i done beat the hell out of it and stuff. i'm sure they'll give him a refund.

79BIG10 · 05-02-2003, 02:38 AM

I agree. Stay away from the cheap chrome ones. They're not worth the trouble. Besides who wants to clean a chrome oil pan all the time? If anything for now stick with a stock pan that you have or get a stock replacement from Milodan. Summit carries them for about $80. If you stick with the one you have go ahead and replace the bolt and gasket while you're there. While it's out clean it out inside and out, clean all the gasket seals off and paint it. It will look good as new for the a cheaper price.

MSL · 05-02-2003, 03:46 AM

I would never go with a chrome oil pan i have never liked the idea of those on there. as formy stock oil pan well it is trashed when i got the truck the pan is smashed on the bottom looks like someone jacked the truck up on it and it leaks. so im going to just get a replacment stocker like you mentioned.

MSL · 05-02-2003, 05:11 AM

Also im going to be replacing the timing chain so should i put the timing cover on first then the oil pan or the oil pan first then the timing cover or does it matter.?

**old Rusty C10** · 05-02-2003, 09:32 AM

take the oil pan off then take off the timing cover do your chain then put back the timing case cover back first then the oil pan makes it easier that way and try using a one piece gasket for the oil pump

MSL · 05-02-2003, 10:20 AM

Hey thanks i will get a one pieace gasket for the oil pump and do it in that order.

79BIG10 · 05-02-2003, 12:28 PM

Make sure to replace the timing chain and gears and even the water pump if need be. Cheap insurance for sure.

MSL · 05-02-2003, 06:07 PM

Ya i have a long list of thing to do and the chain is one of them the water pump i just bought about a month ago.

MSL · 05-02-2003, 07:01 PM

Hey is this a good oil pan to buy i need one and this is a good price.

http://cgi.ebay.com/ebaymotors/ws/eB...category=38657

05-01-2003, 11:23 PM	#1
MSL Registered User Join Date: Mar 2003 Location: So.Oregon Posts: 765	Oil pan Dang i was looking on summit theres no way i can afford a 200 to even a 100 dollar oil pan. so what is cheaper but better than the stocker. or is there.lol Thanks

05-02-2003, 02:38 AM	#3
79BIG10 I'm back with 2nd truck! Join Date: Feb 2002 Location: Texas Posts: 3,774	I agree. Stay away from the cheap chrome ones. They're not worth the trouble. Besides who wants to clean a chrome oil pan all the time? If anything for now stick with a stock pan that you have or get a stock replacement from Milodan. Summit carries them for about $80. If you stick with the one you have go ahead and replace the bolt and gasket while you're there. While it's out clean it out inside and out, clean all the gasket seals off and paint it. It will look good as new for the a cheaper price. __________________ 1979 Chevrolet Bonanza Big10 "Tootsie Roll" 1985 Chevrolet Silverado (wife's) Member of the Southern Bowties Club "Don't underestimate how sexy a fat man who drinks to excess can be." Homer Simpson

05-02-2003, 09:32 AM	#6
old Rusty C10 Robert Olson Transport Join Date: Oct 2002 Location: recent transplant to NC USA Posts: 20,313	take the oil pan off then take off the timing cover do your chain then put back the timing case cover back first then the oil pan makes it easier that way and try using a one piece gasket for the oil pump __________________ Bob 1951 International running on a squarebody chassis "If a man's worth is judged by the people he associates himself with, then i am the richest man in the world knowing some of the fine people of this board" http://67-72chevytrucks.com/vboard/a...t.php?f=25&a=9 (you can review the site rules here!) PM Me for your vehicle/parts hauling needs in the North East US or see my Facebook page Robert Olson Transport Live each day to the fullest.. you never know when fate is going to pull the rug out from under you... I hate cancer!!

05-02-2003, 12:28 PM	#8
79BIG10 I'm back with 2nd truck! Join Date: Feb 2002 Location: Texas Posts: 3,774	Make sure to replace the timing chain and gears and even the water pump if need be. Cheap insurance for sure. __________________ 1979 Chevrolet Bonanza Big10 "Tootsie Roll" 1985 Chevrolet Silverado (wife's) Member of the Southern Bowties Club "Don't underestimate how sexy a fat man who drinks to excess can be." Homer Simpson

05-02-2003, 12:32 AM	#2
CT-Truckster ? Join Date: Jul 2002 Location: Dyersburg, TN Posts: 471	well what ever you do don't the 40$ chrome oil pan like they sell at autozone. i just put one on a 383 i'm building for a freind. he wanted a chrome oil pan and i tried to talk him out of buying that one but he said thats all he could afford. well i didn't fit worth a crap. the side of the pan where bowed in just enough for the crank to rub on the sides of the pan. took a rubber hammer beat it out a little to clear the crank then i had to drill the holes out a little cause they didn't line up good enough with the holes in the block to get the bolts in. and know it's gonna leak cause it's not a good fit around the timing cover or the the rear main. i'm still trying to talk him into getting a decent pan before we put it in the car. i told him when the oil starts pouring out don't come cryin to me. he's like well maybe i can take that one back, yeah after i done beat the hell out of it and stuff. i'm sure they'll give him a refund.

05-02-2003, 03:46 AM	#4
MSL Registered User Join Date: Mar 2003 Location: So.Oregon Posts: 765	I would never go with a chrome oil pan i have never liked the idea of those on there. as formy stock oil pan well it is trashed when i got the truck the pan is smashed on the bottom looks like someone jacked the truck up on it and it leaks. so im going to just get a replacment stocker like you mentioned.

05-02-2003, 05:11 AM	#5
MSL Registered User Join Date: Mar 2003 Location: So.Oregon Posts: 765	Also im going to be replacing the timing chain so should i put the timing cover on first then the oil pan or the oil pan first then the timing cover or does it matter.?

05-02-2003, 10:20 AM	#7
MSL Registered User Join Date: Mar 2003 Location: So.Oregon Posts: 765	Hey thanks i will get a one pieace gasket for the oil pump and do it in that order.

05-02-2003, 06:07 PM	#9
MSL Registered User Join Date: Mar 2003 Location: So.Oregon Posts: 765	Ya i have a long list of thing to do and the chain is one of them the water pump i just bought about a month ago.

05-02-2003, 07:01 PM	#10
MSL Registered User Join Date: Mar 2003 Location: So.Oregon Posts: 765	Hey is this a good oil pan to buy i need one and this is a good price. http://cgi.ebay.com/ebaymotors/ws/eB...category=38657



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.