Starting to start starting a C4 conversion on my 84 SWB GMC - The 1947 - Present Chevrolet & GMC Truck Message Board Network

SatisTraction · 02-09-2010, 03:34 AM

nice build.

here is a c4 suspension that you may find interesting.
http://www.pro-touring.com/forum/showthread.php?t=65041

aggie91 · 02-09-2010, 10:57 AM

Quote:

Originally Posted by SatisTraction

nice build.

here is a c4 suspension that you may find interesting.
http://www.pro-touring.com/forum/showthread.php?t=65041

Someone needs to invite him to post that build here too! That is goining to be something nice...

Sorry Tagg33, not trying to highjack...

Tagg33 · 02-09-2010, 12:03 PM

I agree that is a nice build and I'm going to watch it.

Tagg33 · 04-04-2010, 12:30 AM

I've been working on the back of the truck for the last few weekends. I determined the Corvette IRS was not going to fit in my existing notch so I cut it off. I then welded new 2x4 tube straight back from the top of the notch and I dropped in a couple 2x2 cross pieces. Today I made a mount for the gas tank using 1x1 tube and 2 bolt-on straps on top to hold the tank down. I have placed my order with Porterbuilt for the batwing mounts and a front mount to get the C4 IRS in place. I should have these on Monday. Nate is also going to build me the trailing arms I mentioned previously. Tomorrow I will be taking some final measurements to give him so he can start the trailing arms. I should have some good progress happening in the next few weeks.

02-09-2010, 03:34 AM	#1
SatisTraction Registered User Join Date: Feb 2010 Location: jackson ms Posts: 133	Re: Starting to start starting a C4 conversion on my 84 SWB GMC nice build. here is a c4 suspension that you may find interesting. http://www.pro-touring.com/forum/showthread.php?t=65041 __________________ WTB 73-87 SWB fleetside bed!! 85 C10 6.0 project 69 camaro ls1 / t56 90 mustang lx 75 bronco injected 351w

02-09-2010, 12:03 PM	#3
Tagg33 Registered User Join Date: Mar 2007 Location: Denver, CO Posts: 247	Re: Starting to start starting a C4 conversion on my 84 SWB GMC I agree that is a nice build and I'm going to watch it. __________________ Ryan 84 SWB, C4 IFS Crossmember, C4 IRS, RE7 bags, WCC 3pc 22"s My reBuild: http://67-72chevytrucks.com/vboard/s...d.php?t=346328

04-04-2010, 12:30 AM	#4
Tagg33 Registered User Join Date: Mar 2007 Location: Denver, CO Posts: 247	Re: Starting to start starting a C4 conversion on my 84 SWB GMC I've been working on the back of the truck for the last few weekends. I determined the Corvette IRS was not going to fit in my existing notch so I cut it off. I then welded new 2x4 tube straight back from the top of the notch and I dropped in a couple 2x2 cross pieces. Today I made a mount for the gas tank using 1x1 tube and 2 bolt-on straps on top to hold the tank down. I have placed my order with Porterbuilt for the batwing mounts and a front mount to get the C4 IRS in place. I should have these on Monday. Nate is also going to build me the trailing arms I mentioned previously. Tomorrow I will be taking some final measurements to give him so he can start the trailing arms. I should have some good progress happening in the next few weeks. Attached Images __________________ Ryan 84 SWB, C4 IFS Crossmember, C4 IRS, RE7 bags, WCC 3pc 22"s My reBuild: http://67-72chevytrucks.com/vboard/s...d.php?t=346328



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.