69 chevy bumper still wont line up to 72 gmc - The 1947 - Present Chevrolet & GMC Truck Message Board Network

Baged72 · 02-08-2010, 12:58 AM

I made a post a week or so ago, and the replies i got were to buy 69 brackets but that did not work. I am trying to install a smooth 1969 chevy bumper on my 1972 2wd gmc, with the bumper pushed against the frame it still sticks 2 or 3 inches from the grill and leaves a gap. I bought different brackets and they still wont work, i am trying to install it with the 2 top brackets that rest above the frame rail and you run a bolt through.

Any ideas??? It just seems my frame needs to sit back about an inch, this bumper combo not compatible?

Baged72 · 02-10-2010, 12:51 AM

Bump

Wilson_ · 02-10-2010, 04:58 AM

I noticed this on my 67 gmc with gmc bumper, the bolts i was using on the top center were to long and were hitting the grill.

other that that im not sure

68GMCCustom · 02-10-2010, 08:57 AM

does the center of the bumper mount flush to the front frame horns? If so, that's as far back as you can go w/o cutting them.

68gmsee · 02-10-2010, 10:50 AM

Which bumper did you buy. I was thinking of buying one for my 68 GMC. I also have a 69 Chevy and I always thought the bumpers and brackets were the same.

Also, post some pics if you can. It will help to see what you're dealing with.

57larry · 02-10-2010, 02:30 PM

pics would help a lot to explain it

Baged72 · 02-11-2010, 08:22 PM

I have a 72 not a 69, i bought the smooth front chrome bumper that goes with the 69 chevy. I do not have the side brackets i only have the top brackets that sit in the center of the bumper, my problem is that the frame hits my bracket bolts so it does not sit snug against my front grill. I dont know how to take a picture when there is no possible way to mount the bumper so i cant show the gap.

Baged72 · 02-11-2010, 08:23 PM

Does not sit flush because of the bolts that the center brackets have.

Quote:

Originally Posted by 68GMCCustom

does the center of the bumper mount flush to the front frame horns? If so, that's as far back as you can go w/o cutting them.

**amcgeh01** · 02-11-2010, 10:43 PM

Hey Baged72,

Yes, they are different between the years and you can see that even LMC carries different codes for them.. I agree with the others though, we really need to see what you have and the measurements on your current bolts as well.. JUst set the bumper down on the ground inline with the normal position it would go or have a buddy lift it while you take an over head photo and then we can see.. If I remember correctly, there were inside and outside brackets but I could be wrong... some bumpers have a slight curviture and we need to see how much yours is curving before we can give any advice.. it's either that or go to the hardware store and buy some different length bolts and try that... Here is a link to the different bumpers and years...

http://www.lmctruck.com/icatalog/cb/full.aspx?Page=76

02-08-2010, 12:58 AM	#1
Baged72 Registered User Join Date: Mar 2009 Location: Sac Town, CA Posts: 146	69 chevy bumper still wont line up to 72 gmc I made a post a week or so ago, and the replies i got were to buy 69 brackets but that did not work. I am trying to install a smooth 1969 chevy bumper on my 1972 2wd gmc, with the bumper pushed against the frame it still sticks 2 or 3 inches from the grill and leaves a gap. I bought different brackets and they still wont work, i am trying to install it with the 2 top brackets that rest above the frame rail and you run a bolt through. Any ideas??? It just seems my frame needs to sit back about an inch, this bumper combo not compatible? __________________ 72 GMC SB Built 400 SBC B&M TH350 12Bolt Posi 4:11 Bagged Last edited by Baged72; 02-10-2010 at 12:52 AM.

02-10-2010, 12:51 AM	#2
Baged72 Registered User Join Date: Mar 2009 Location: Sac Town, CA Posts: 146	Re: 69 chevy bumper still wont line up to 72 gmc Bump __________________ 72 GMC SB Built 400 SBC B&M TH350 12Bolt Posi 4:11 Bagged

02-10-2010, 04:58 AM	#3
Wilson_ Registered User Join Date: Sep 2008 Location: Santa Rosa, CA Posts: 451	Re: 69 chevy bumper still wont line up to 72 gmc I noticed this on my 67 gmc with gmc bumper, the bolts i was using on the top center were to long and were hitting the grill. other that that im not sure __________________ Northern California Group Met list: Cyclone, KCJones, TranzAm, extd56, hotrodhomi, mnky30, Rokcrln, Brad, JerryJones, Petey-pablo, 72Subby

02-10-2010, 08:57 AM	#4
68GMCCustom Truck and auto performance nut Join Date: Feb 2007 Location: McKinney,Texas Posts: 3,848	Re: 69 chevy bumper still wont line up to 72 gmc does the center of the bumper mount flush to the front frame horns? If so, that's as far back as you can go w/o cutting them. __________________ Kurt - '68 GMC short step - NIB '09 LY6 6.0L crate motor w/mods, NIB '12 crate 4L85e w/billet 3k stall Circle D, 3.73 posi 12 bolt, DynaTech f-swap headers, 3/4 drop, handling mods, etc. - my toy '72 Chevy LWB C-10 Highlander - 350/350 ps/pb/tilt/ac - not original but close '06 Chevy TrailBlazerSS - LS2/4L70e - little black hot rod SUV - my DD '18 Kia Sorento - wife's econo-driver '95 Chevy S10 - reg cab shortbed, LS, 4.3, auto... my '68's powertrain and chassis build -links broken A surprise phase - carb to efi -links broken

02-10-2010, 10:50 AM	#5
68gmsee Active Member Join Date: Jul 2007 Location: Centrally located between Houston, Austin and Waco. BCS area. Posts: 7,947	Re: 69 chevy bumper still wont line up to 72 gmc Which bumper did you buy. I was thinking of buying one for my 68 GMC. I also have a 69 Chevy and I always thought the bumpers and brackets were the same. Also, post some pics if you can. It will help to see what you're dealing with.

02-10-2010, 02:30 PM	#6
57larry Registered User Join Date: Nov 2007 Location: Indianapolis Posts: 1,162	Re: 69 chevy bumper still wont line up to 72 gmc pics would help a lot to explain it

02-11-2010, 08:22 PM	#7
Baged72 Registered User Join Date: Mar 2009 Location: Sac Town, CA Posts: 146	Re: 69 chevy bumper still wont line up to 72 gmc I have a 72 not a 69, i bought the smooth front chrome bumper that goes with the 69 chevy. I do not have the side brackets i only have the top brackets that sit in the center of the bumper, my problem is that the frame hits my bracket bolts so it does not sit snug against my front grill. I dont know how to take a picture when there is no possible way to mount the bumper so i cant show the gap. __________________ 72 GMC SB Built 400 SBC B&M TH350 12Bolt Posi 4:11 Bagged

02-11-2010, 10:43 PM	#9
amcgeh01 Senior Member Join Date: Jul 2009 Location: SoCal Posts: 206	Re: 69 chevy bumper still wont line up to 72 gmc Hey Baged72, Yes, they are different between the years and you can see that even LMC carries different codes for them.. I agree with the others though, we really need to see what you have and the measurements on your current bolts as well.. JUst set the bumper down on the ground inline with the normal position it would go or have a buddy lift it while you take an over head photo and then we can see.. If I remember correctly, there were inside and outside brackets but I could be wrong... some bumpers have a slight curviture and we need to see how much yours is curving before we can give any advice.. it's either that or go to the hardware store and buy some different length bolts and try that... Here is a link to the different bumpers and years... http://www.lmctruck.com/icatalog/cb/full.aspx?Page=76 __________________ ******************************************** In-work on my 5.3L/4L65E/NP208 case conversion into a 1972 GMC JImmy 4x4... Not as simple as it looks folks..



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.