NC NIB Edelbrock RPM W/Endurashine - The 1947 - Present Chevrolet & GMC Truck Message Board Network

71chevytruckguy · 01-26-2010, 12:31 AM

New in box Edelbrock Performer RPM intake with Endurashine coating for SBC. Part# 71014. Can get pics if needed. $220 plus shipping. Chris.

71chevytruckguy · 01-27-2010, 06:39 PM

Pics. Chris.

fishingjred73 · 01-28-2010, 12:26 AM

I couldn't read the years listed on the label, is this for 67-86 small blocks? Could you get me a price on shipping to 71467 and let me know thanks James.

71chevytruckguy · 01-28-2010, 04:43 AM

This will work for a 67-68 SBC. Shipping will be $15 via USPS. Thanks, Chris.

fishingjred73 · 01-28-2010, 08:55 AM

Quote:

Originally Posted by 71chevytruckguy

This will work for a 67-68 SBC. Shipping will be $15 via USPS. Thanks, Chris.

If you meant to say 67-86. Then I'll take it. PM me how and where you'd like payment. James

fdbdw · 01-28-2010, 12:00 PM

71014 55 thru 86

71chevytruckguy · 01-28-2010, 01:44 PM

Sold to fishingjred73 pending payment. Chris.

fishingjred73 · 01-28-2010, 01:53 PM

Thanks Chris payment has been sent!

71chevytruckguy · 01-28-2010, 04:04 PM

Payment recivied. I should be able to get shipped out tomorrow. Thanks, Chris.

fishingjred73 · 02-12-2010, 03:39 PM

Got it today Chris. Thanks again, James

01-26-2010, 12:31 AM	#1
71chevytruckguy Registered User Join Date: Jul 2005 Location: Kernersville, NC Posts: 599	NIB Edelbrock RPM W/Endurashine New in box Edelbrock Performer RPM intake with Endurashine coating for SBC. Part# 71014. Can get pics if needed. $220 plus shipping. Chris. __________________ its a work in progess. 71 c-10 lwb, in the middle of frame off restoration. 69 c-10 swb, drag truck, 406 sbc, balanced, comp 292 cam, ported, polished, gasket matched, and bowl blended pro comp 210cc heads, 2.02/1.60 ferrea valves,1.6 roller rockers, re curved hei with msd 6al box, 2-step rev limter, accel 300+ wires, ported victor jr intake, holley 750 double pumper carb, dynomax 1 5/8 headers, 4 spd munci m-20 with super case and iron midplate, mr. gasket vertigate shifter, 5.38 pro gears with full spool, 33 spline moser axles and c-clip elimators, line-loc, 5 gal fuel cell, holley blue pump. 7.807 @ 88.37mph 1.60 60FT 80 g-20 van, tow rig, cammed 305, th350, 10 bolt 88 jeep wrangler, dd, 258, ax-15 swap, 4.5" lift, 33x12.50's, lockers, 3.55's

01-27-2010, 06:39 PM	#2
71chevytruckguy Registered User Join Date: Jul 2005 Location: Kernersville, NC Posts: 599	Re: NIB Edelbrock RPM W/Endurashine Pics. Chris. Attached Images __________________ its a work in progess. 71 c-10 lwb, in the middle of frame off restoration. 69 c-10 swb, drag truck, 406 sbc, balanced, comp 292 cam, ported, polished, gasket matched, and bowl blended pro comp 210cc heads, 2.02/1.60 ferrea valves,1.6 roller rockers, re curved hei with msd 6al box, 2-step rev limter, accel 300+ wires, ported victor jr intake, holley 750 double pumper carb, dynomax 1 5/8 headers, 4 spd munci m-20 with super case and iron midplate, mr. gasket vertigate shifter, 5.38 pro gears with full spool, 33 spline moser axles and c-clip elimators, line-loc, 5 gal fuel cell, holley blue pump. 7.807 @ 88.37mph 1.60 60FT 80 g-20 van, tow rig, cammed 305, th350, 10 bolt 88 jeep wrangler, dd, 258, ax-15 swap, 4.5" lift, 33x12.50's, lockers, 3.55's

01-28-2010, 12:26 AM	#3
fishingjred73 Registered User Join Date: May 2007 Location: LOUISIANA Posts: 811	Re: NIB Edelbrock RPM W/Endurashine I couldn't read the years listed on the label, is this for 67-86 small blocks? Could you get me a price on shipping to 71467 and let me know thanks James. __________________ James '68 Stepside (ground up in progress) My 68 build thread http://louisianaclassictruckclub.fre...side-t956.html '81 SWB "Pap paw" (Driver) The 81 build thread http://louisianaclassictruckclub.fre...-swb-t960.html Member of www.louisianaclassictruckclub.com https://www.facebook.com/groups/296290610747732/

01-28-2010, 04:43 AM	#4
71chevytruckguy Registered User Join Date: Jul 2005 Location: Kernersville, NC Posts: 599	Re: NIB Edelbrock RPM W/Endurashine This will work for a 67-68 SBC. Shipping will be $15 via USPS. Thanks, Chris. __________________ its a work in progess. 71 c-10 lwb, in the middle of frame off restoration. 69 c-10 swb, drag truck, 406 sbc, balanced, comp 292 cam, ported, polished, gasket matched, and bowl blended pro comp 210cc heads, 2.02/1.60 ferrea valves,1.6 roller rockers, re curved hei with msd 6al box, 2-step rev limter, accel 300+ wires, ported victor jr intake, holley 750 double pumper carb, dynomax 1 5/8 headers, 4 spd munci m-20 with super case and iron midplate, mr. gasket vertigate shifter, 5.38 pro gears with full spool, 33 spline moser axles and c-clip elimators, line-loc, 5 gal fuel cell, holley blue pump. 7.807 @ 88.37mph 1.60 60FT 80 g-20 van, tow rig, cammed 305, th350, 10 bolt 88 jeep wrangler, dd, 258, ax-15 swap, 4.5" lift, 33x12.50's, lockers, 3.55's

01-28-2010, 12:00 PM	#6
fdbdw Registered User Join Date: Jan 2009 Location: colorado springs Posts: 479	Re: NIB Edelbrock RPM W/Endurashine 71014 55 thru 86

01-28-2010, 01:44 PM	#7
71chevytruckguy Registered User Join Date: Jul 2005 Location: Kernersville, NC Posts: 599	Re: NIB Edelbrock RPM W/Endurashine Sold to fishingjred73 pending payment. Chris. __________________ its a work in progess. 71 c-10 lwb, in the middle of frame off restoration. 69 c-10 swb, drag truck, 406 sbc, balanced, comp 292 cam, ported, polished, gasket matched, and bowl blended pro comp 210cc heads, 2.02/1.60 ferrea valves,1.6 roller rockers, re curved hei with msd 6al box, 2-step rev limter, accel 300+ wires, ported victor jr intake, holley 750 double pumper carb, dynomax 1 5/8 headers, 4 spd munci m-20 with super case and iron midplate, mr. gasket vertigate shifter, 5.38 pro gears with full spool, 33 spline moser axles and c-clip elimators, line-loc, 5 gal fuel cell, holley blue pump. 7.807 @ 88.37mph 1.60 60FT 80 g-20 van, tow rig, cammed 305, th350, 10 bolt 88 jeep wrangler, dd, 258, ax-15 swap, 4.5" lift, 33x12.50's, lockers, 3.55's

01-28-2010, 01:53 PM	#8
fishingjred73 Registered User Join Date: May 2007 Location: LOUISIANA Posts: 811	Re: NIB Edelbrock RPM W/Endurashine Thanks Chris payment has been sent! __________________ James '68 Stepside (ground up in progress) My 68 build thread http://louisianaclassictruckclub.fre...side-t956.html '81 SWB "Pap paw" (Driver) The 81 build thread http://louisianaclassictruckclub.fre...-swb-t960.html Member of www.louisianaclassictruckclub.com https://www.facebook.com/groups/296290610747732/

01-28-2010, 04:04 PM	#9
71chevytruckguy Registered User Join Date: Jul 2005 Location: Kernersville, NC Posts: 599	Re: NIB Edelbrock RPM W/Endurashine Payment recivied. I should be able to get shipped out tomorrow. Thanks, Chris. __________________ its a work in progess. 71 c-10 lwb, in the middle of frame off restoration. 69 c-10 swb, drag truck, 406 sbc, balanced, comp 292 cam, ported, polished, gasket matched, and bowl blended pro comp 210cc heads, 2.02/1.60 ferrea valves,1.6 roller rockers, re curved hei with msd 6al box, 2-step rev limter, accel 300+ wires, ported victor jr intake, holley 750 double pumper carb, dynomax 1 5/8 headers, 4 spd munci m-20 with super case and iron midplate, mr. gasket vertigate shifter, 5.38 pro gears with full spool, 33 spline moser axles and c-clip elimators, line-loc, 5 gal fuel cell, holley blue pump. 7.807 @ 88.37mph 1.60 60FT 80 g-20 van, tow rig, cammed 305, th350, 10 bolt 88 jeep wrangler, dd, 258, ax-15 swap, 4.5" lift, 33x12.50's, lockers, 3.55's

02-12-2010, 03:39 PM	#10
fishingjred73 Registered User Join Date: May 2007 Location: LOUISIANA Posts: 811	Re: NIB Edelbrock RPM W/Endurashine Got it today Chris. Thanks again, James __________________ James '68 Stepside (ground up in progress) My 68 build thread http://louisianaclassictruckclub.fre...side-t956.html '81 SWB "Pap paw" (Driver) The 81 build thread http://louisianaclassictruckclub.fre...-swb-t960.html Member of www.louisianaclassictruckclub.com https://www.facebook.com/groups/296290610747732/



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.