![]() |
![]() |
#1 |
Dan
![]() Join Date: Dec 2009
Location: Remsen, NY
Posts: 230
|
![]()
I have a 1968 c10 shortbox with a 2 piece driveshaft and a th350. I need the front driveshaft. i dont know if there were different sized front ones, but if you have a front that youd sell me, give me a price with shipping to 13438, and also measurements of the driveshaft. Thanks in advance! Dan.
__________________
1968 C10 Short Fleet - L79 327, th350 1971 Nova - 327, Th350, 3.73 posi 1971 K10 Short fleet - 350/350 1971 K20 longbox - 350, 4spd 1970 Chevelle, Tunnel ram set up 355, th350 1986 C30 Dually, 454/400 1967 Impala 4 door hardtop, Supernatural clone 1968 Camaro, 327, pwerglide 1967 camaro, numbers match 350, powerglide, bench seat car 1968 Nova, Numbers match 6cyl, powerglide 1968 Nova, 327, th350 1970 Impala, 350, Th350 1968 Impala, Numbers match 350, Th350 1971 Chevelle SS, Numbers match 350, muncie |
![]() |
![]() |
![]() |
#2 |
Who needs sleep...
![]() Join Date: Aug 2009
Location: Middleburg, Florida
Posts: 260
|
Re: WTB: Driveshaft
I'm about to pull a front and rear off my truck, is a 72GMC LWB with a long tail TH350... if anyone knows if that will work? Do you have measurements on the one you need?
Trip |
![]() |
![]() |
![]() |
#3 |
Dan
![]() Join Date: Dec 2009
Location: Remsen, NY
Posts: 230
|
Re: WTB: Driveshaft
Ill have to get some measurements tomorrow afternoon and let you know, would be nice if theyre the same! Thanks for your reply! Dan.
__________________
1968 C10 Short Fleet - L79 327, th350 1971 Nova - 327, Th350, 3.73 posi 1971 K10 Short fleet - 350/350 1971 K20 longbox - 350, 4spd 1970 Chevelle, Tunnel ram set up 355, th350 1986 C30 Dually, 454/400 1967 Impala 4 door hardtop, Supernatural clone 1968 Camaro, 327, pwerglide 1967 camaro, numbers match 350, powerglide, bench seat car 1968 Nova, Numbers match 6cyl, powerglide 1968 Nova, 327, th350 1970 Impala, 350, Th350 1968 Impala, Numbers match 350, Th350 1971 Chevelle SS, Numbers match 350, muncie |
![]() |
![]() |
![]() |
#4 |
Dan
![]() Join Date: Dec 2009
Location: Remsen, NY
Posts: 230
|
Re: WTB: Driveshaft
i just took a quick measurement, its around 20 or 21inches, give or take. so if you or anone else has one close to that, give me the measurement and ill see if it will work. Thanks! Dan
__________________
1968 C10 Short Fleet - L79 327, th350 1971 Nova - 327, Th350, 3.73 posi 1971 K10 Short fleet - 350/350 1971 K20 longbox - 350, 4spd 1970 Chevelle, Tunnel ram set up 355, th350 1986 C30 Dually, 454/400 1967 Impala 4 door hardtop, Supernatural clone 1968 Camaro, 327, pwerglide 1967 camaro, numbers match 350, powerglide, bench seat car 1968 Nova, Numbers match 6cyl, powerglide 1968 Nova, 327, th350 1970 Impala, 350, Th350 1968 Impala, Numbers match 350, Th350 1971 Chevelle SS, Numbers match 350, muncie |
![]() |
![]() |
![]() |
#5 |
Who needs sleep...
![]() Join Date: Aug 2009
Location: Middleburg, Florida
Posts: 260
|
Re: WTB: Driveshaft
Sorry, that's about 10" shorter than the one I have... I went from like 30 to 33+ to accommodate. Guess the front shaft is really different in an SWB/LWB setup
Trip |
![]() |
![]() |
![]() |
#6 |
Dan
![]() Join Date: Dec 2009
Location: Remsen, NY
Posts: 230
|
Re: WTB: Driveshaft
Thanks anyways, i think theres a couple variations depending on wheel base, transmission, 2wd and 4wd. anyone else?
__________________
1968 C10 Short Fleet - L79 327, th350 1971 Nova - 327, Th350, 3.73 posi 1971 K10 Short fleet - 350/350 1971 K20 longbox - 350, 4spd 1970 Chevelle, Tunnel ram set up 355, th350 1986 C30 Dually, 454/400 1967 Impala 4 door hardtop, Supernatural clone 1968 Camaro, 327, pwerglide 1967 camaro, numbers match 350, powerglide, bench seat car 1968 Nova, Numbers match 6cyl, powerglide 1968 Nova, 327, th350 1970 Impala, 350, Th350 1968 Impala, Numbers match 350, Th350 1971 Chevelle SS, Numbers match 350, muncie |
![]() |
![]() |
![]() |
#7 |
Dan
![]() Join Date: Dec 2009
Location: Remsen, NY
Posts: 230
|
Re: WTB: Driveshaft
ttt any body have a front driveshaft from a 2 piece setup for my 68 c10 shortbox with a th350? I really need one.
__________________
1968 C10 Short Fleet - L79 327, th350 1971 Nova - 327, Th350, 3.73 posi 1971 K10 Short fleet - 350/350 1971 K20 longbox - 350, 4spd 1970 Chevelle, Tunnel ram set up 355, th350 1986 C30 Dually, 454/400 1967 Impala 4 door hardtop, Supernatural clone 1968 Camaro, 327, pwerglide 1967 camaro, numbers match 350, powerglide, bench seat car 1968 Nova, Numbers match 6cyl, powerglide 1968 Nova, 327, th350 1970 Impala, 350, Th350 1968 Impala, Numbers match 350, Th350 1971 Chevelle SS, Numbers match 350, muncie |
![]() |
![]() |
![]() |
#8 |
Dan
![]() Join Date: Dec 2009
Location: Remsen, NY
Posts: 230
|
Re: WTB: Driveshaft
ttt anybody?
__________________
1968 C10 Short Fleet - L79 327, th350 1971 Nova - 327, Th350, 3.73 posi 1971 K10 Short fleet - 350/350 1971 K20 longbox - 350, 4spd 1970 Chevelle, Tunnel ram set up 355, th350 1986 C30 Dually, 454/400 1967 Impala 4 door hardtop, Supernatural clone 1968 Camaro, 327, pwerglide 1967 camaro, numbers match 350, powerglide, bench seat car 1968 Nova, Numbers match 6cyl, powerglide 1968 Nova, 327, th350 1970 Impala, 350, Th350 1968 Impala, Numbers match 350, Th350 1971 Chevelle SS, Numbers match 350, muncie |
![]() |
![]() |
![]() |
#9 |
Senior Member
![]() Join Date: Jun 2005
Location: Winona Lake, IN
Posts: 6,268
|
Re: WTB: Driveshaft
I have a 2 pc that I got with a trans a while back. I will measure it on Monday (it's at work) and let you know if it's the length you are looking for.
__________________
70 C/10 SWB 402/TH400/3.73 "The Needy Beast" 200,000 Mile Club Disc Brake Club Owner installed options: Front Sway Bar Power Steering Power Brakes Cigar Lighter Courtesy Lights Deluxe Side Markers Wiper Delay Power windows Power Locks Sniper EFI 2015 Silverado 1500 LS 4.3/6L80/3.23 lowered 2" front & rear |
![]() |
![]() |
![]() |
#10 |
Dan
![]() Join Date: Dec 2009
Location: Remsen, NY
Posts: 230
|
Re: WTB: Driveshaft
Thanks! that would be great. if its any where near that length, just give me the measurements and ill check to see if it would fit just to be sure, because my measurement was just a quick one, didnt have much time. So it could be give or take a few inches.
__________________
1968 C10 Short Fleet - L79 327, th350 1971 Nova - 327, Th350, 3.73 posi 1971 K10 Short fleet - 350/350 1971 K20 longbox - 350, 4spd 1970 Chevelle, Tunnel ram set up 355, th350 1986 C30 Dually, 454/400 1967 Impala 4 door hardtop, Supernatural clone 1968 Camaro, 327, pwerglide 1967 camaro, numbers match 350, powerglide, bench seat car 1968 Nova, Numbers match 6cyl, powerglide 1968 Nova, 327, th350 1970 Impala, 350, Th350 1968 Impala, Numbers match 350, Th350 1971 Chevelle SS, Numbers match 350, muncie |
![]() |
![]() |
![]() |
#11 |
Account Suspended
Join Date: Feb 2010
Location: Bessemer City, NC
Posts: 347
|
Re: WTB: Driveshaft
Dan,
This maybe a good lead for you, go to ebay and put in this item number..2703 9107 8194. This guy makes them and they look really nice. |
![]() |
![]() |
![]() |
#12 |
Registered User
Join Date: Apr 2009
Location: Rochester, NY
Posts: 1,458
|
Re: WTB: Driveshaft
I can check my 70 GMC suburban. Not sure if it's the same.
Unfortunately, i think they just pulled the 71 Blazer from the yard to crush. It still had the driveshafts too.
__________________
1970 Blazer 350/SM465/205 SOLD! | 1998 Z3 |
![]() |
![]() |
![]() |
#13 |
Dan
![]() Join Date: Dec 2009
Location: Remsen, NY
Posts: 230
|
Re: WTB: Driveshaft
JimmyFloyd, that would be great, id really appreciate it.
72chevy383, they do look really nice, not a bad price for a new shaft either, but a little out of my range. Thanks for telling me though! Dan.
__________________
1968 C10 Short Fleet - L79 327, th350 1971 Nova - 327, Th350, 3.73 posi 1971 K10 Short fleet - 350/350 1971 K20 longbox - 350, 4spd 1970 Chevelle, Tunnel ram set up 355, th350 1986 C30 Dually, 454/400 1967 Impala 4 door hardtop, Supernatural clone 1968 Camaro, 327, pwerglide 1967 camaro, numbers match 350, powerglide, bench seat car 1968 Nova, Numbers match 6cyl, powerglide 1968 Nova, 327, th350 1970 Impala, 350, Th350 1968 Impala, Numbers match 350, Th350 1971 Chevelle SS, Numbers match 350, muncie |
![]() |
![]() |
![]() |
#14 |
Registered User
Join Date: Feb 2006
Location: Windsor, CO
Posts: 67
|
Re: WTB: Driveshaft
This is off my 69 short wide. yoke to yoke is 25". rear yoke to front of shaft is 30 1/2".
|
![]() |
![]() |
![]() |
#15 |
Dan
![]() Join Date: Dec 2009
Location: Remsen, NY
Posts: 230
|
Re: WTB: Driveshaft
Roadking! looks like a winner! How much would you want for that front shaft shipped to 13438? and just to be sure, what diameter is it?
__________________
1968 C10 Short Fleet - L79 327, th350 1971 Nova - 327, Th350, 3.73 posi 1971 K10 Short fleet - 350/350 1971 K20 longbox - 350, 4spd 1970 Chevelle, Tunnel ram set up 355, th350 1986 C30 Dually, 454/400 1967 Impala 4 door hardtop, Supernatural clone 1968 Camaro, 327, pwerglide 1967 camaro, numbers match 350, powerglide, bench seat car 1968 Nova, Numbers match 6cyl, powerglide 1968 Nova, 327, th350 1970 Impala, 350, Th350 1968 Impala, Numbers match 350, Th350 1971 Chevelle SS, Numbers match 350, muncie |
![]() |
![]() |
![]() |
#16 |
Senior Member
![]() Join Date: Jun 2005
Location: Winona Lake, IN
Posts: 6,268
|
Re: WTB: Driveshaft
Sorry, the shaft I have must be from a LWB, it's apx. 36" both sections.
__________________
70 C/10 SWB 402/TH400/3.73 "The Needy Beast" 200,000 Mile Club Disc Brake Club Owner installed options: Front Sway Bar Power Steering Power Brakes Cigar Lighter Courtesy Lights Deluxe Side Markers Wiper Delay Power windows Power Locks Sniper EFI 2015 Silverado 1500 LS 4.3/6L80/3.23 lowered 2" front & rear |
![]() |
![]() |
![]() |
#17 |
Who needs sleep...
![]() Join Date: Aug 2009
Location: Middleburg, Florida
Posts: 260
|
Re: WTB: Driveshaft
|
![]() |
![]() |
![]() |
#18 |
Dan
![]() Join Date: Dec 2009
Location: Remsen, NY
Posts: 230
|
Re: WTB: Driveshaft
Trip, i said aprox 20-21 inches, give or take a few. i only had time to get a quick measurement. When he said 25inches, i took a better measurement and his will work. you said yours was about 10inches longer than 20inches? so yours would be about 30? which is too long. Im sorry if we somehow missunderstood each other, if i had known yours was 25inches, id have bought yours but i didnt know. Dan.
__________________
1968 C10 Short Fleet - L79 327, th350 1971 Nova - 327, Th350, 3.73 posi 1971 K10 Short fleet - 350/350 1971 K20 longbox - 350, 4spd 1970 Chevelle, Tunnel ram set up 355, th350 1986 C30 Dually, 454/400 1967 Impala 4 door hardtop, Supernatural clone 1968 Camaro, 327, pwerglide 1967 camaro, numbers match 350, powerglide, bench seat car 1968 Nova, Numbers match 6cyl, powerglide 1968 Nova, 327, th350 1970 Impala, 350, Th350 1968 Impala, Numbers match 350, Th350 1971 Chevelle SS, Numbers match 350, muncie |
![]() |
![]() |
![]() |
#19 |
Who needs sleep...
![]() Join Date: Aug 2009
Location: Middleburg, Florida
Posts: 260
|
Re: WTB: Driveshaft
No worries...
I'd have to put a tape on it just to be sure, but 30 1/2 center to center on the yokes. I had to go to 33 1/2-3/4 for my swap because the 4spd is 3" shorter than a long tail TH350. I wasn't in a rush to sell it, just trying to be helpful, if his will work, go with that one, no worries! Trip |
![]() |
![]() |
![]() |
#20 |
Dan
![]() Join Date: Dec 2009
Location: Remsen, NY
Posts: 230
|
Re: WTB: Driveshaft
Yea his is 25 yoke to yoke, i appreciate your help though! have a great day! Dan.
__________________
1968 C10 Short Fleet - L79 327, th350 1971 Nova - 327, Th350, 3.73 posi 1971 K10 Short fleet - 350/350 1971 K20 longbox - 350, 4spd 1970 Chevelle, Tunnel ram set up 355, th350 1986 C30 Dually, 454/400 1967 Impala 4 door hardtop, Supernatural clone 1968 Camaro, 327, pwerglide 1967 camaro, numbers match 350, powerglide, bench seat car 1968 Nova, Numbers match 6cyl, powerglide 1968 Nova, 327, th350 1970 Impala, 350, Th350 1968 Impala, Numbers match 350, Th350 1971 Chevelle SS, Numbers match 350, muncie |
![]() |
![]() |
![]() |
#21 |
Who needs sleep...
![]() Join Date: Aug 2009
Location: Middleburg, Florida
Posts: 260
|
Re: WTB: Driveshaft
Gotcha, I was measuring center of the u-joint, center of hole to center of hole, as I was pulling from the junk yard and aiming for length rather than vintage and yoke size might have varied slightly if it was from another year/model
Trip |
![]() |
![]() |
![]() |
Bookmarks |
|
|