Dash Gauges - The 1947 - Present Chevrolet & GMC Truck Message Board Network

kenm78 · 02-21-2010, 05:37 PM

I'm looking to replace all my gauges in my 82 K10 in the next week. I am looking at buying all auto meter phantom series. Will the 2-1/16 gauges fit in the 4 small holes, and the 3-3/8 fit in the two large holes? In the past I seen some threads but I can't find them for reference. I was intending just to mount them to the plastic outside bezel. Any thoughts or input. Thanks.

flamingbig10 · 02-21-2010, 06:30 PM

the large holes are 5" so you'll need to recesses them or make a panels to go over the stock bezel

kenm78 · 02-21-2010, 06:32 PM

Quote:

Originally Posted by flamingbig10

the large holes are 5" so you'll need to recesses them or make a panels to go over the stock bezel

How about the small ones? any Idea

flamingbig10 · 02-21-2010, 06:44 PM

I believe the holes are to big
or cover the bezel here's to Ideas aluminum diamond plate or sheet metal

kenm78 · 02-21-2010, 07:26 PM

Yours look good. I'm just going to have to take a step back and do some figuring I guess. I was hoping I could get away with recessing them in the bezel....

Tezjoe84 · 02-22-2010, 02:30 AM

Here ya go...

http://67-72chevytrucks.com/vboard/s...d.php?t=180608

http://67-72chevytrucks.com/vboard/s...d.php?t=316860

I'm gonna use the Ultra-lite II gauges in mine, and order the billet bezel from LMC.

Hope this helps

02-21-2010, 05:37 PM	#1
kenm78 Broken Down Join Date: Dec 2006 Location: Choctaw, Oklahoma Posts: 1,267	Dash Gauges I'm looking to replace all my gauges in my 82 K10 in the next week. I am looking at buying all auto meter phantom series. Will the 2-1/16 gauges fit in the 4 small holes, and the 3-3/8 fit in the two large holes? In the past I seen some threads but I can't find them for reference. I was intending just to mount them to the plastic outside bezel. Any thoughts or input. Thanks. __________________ kenm78 1982 Chevy 4X4 Project truck “It’s better to keep your mouth shut and let people wonder about your ignorance, than open your mouth and reveal all doubt”

02-21-2010, 06:30 PM	#2
flamingbig10 6.0 powered square Join Date: Feb 2008 Location: Mesquite texas Posts: 3,459	Re: Dash Gauges the large holes are 5" so you'll need to recesses them or make a panels to go over the stock bezel __________________ Aaron 1980 c-10 short bed lowered, cammed 6.0, 4l80e 3600 stall, smp tune, wilwoods, and flames best time so far best et 7.86 @87 on motor 7.57 90 on a 75 shot Build http://67-72chevytrucks.com/vboard/s...d.php?t=283326

02-21-2010, 06:44 PM	#4
flamingbig10 6.0 powered square Join Date: Feb 2008 Location: Mesquite texas Posts: 3,459	Re: Dash Gauges I believe the holes are to big or cover the bezel here's to Ideas aluminum diamond plate or sheet metal __________________ Aaron 1980 c-10 short bed lowered, cammed 6.0, 4l80e 3600 stall, smp tune, wilwoods, and flames best time so far best et 7.86 @87 on motor 7.57 90 on a 75 shot Build http://67-72chevytrucks.com/vboard/s...d.php?t=283326

02-21-2010, 07:26 PM	#5
kenm78 Broken Down Join Date: Dec 2006 Location: Choctaw, Oklahoma Posts: 1,267	Re: Dash Gauges Yours look good. I'm just going to have to take a step back and do some figuring I guess. I was hoping I could get away with recessing them in the bezel.... __________________ kenm78 1982 Chevy 4X4 Project truck “It’s better to keep your mouth shut and let people wonder about your ignorance, than open your mouth and reveal all doubt”

02-22-2010, 02:30 AM	#6
Tezjoe84 Registered User Join Date: Jan 2010 Location: Ardmore, Ok Posts: 255	Re: Dash Gauges Here ya go... http://67-72chevytrucks.com/vboard/s...d.php?t=180608 http://67-72chevytrucks.com/vboard/s...d.php?t=316860 I'm gonna use the Ultra-lite II gauges in mine, and order the billet bezel from LMC. Hope this helps __________________ Joe 1957 Chevy 3100 Stepside



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.