cpp steering joints? - The 1947 - Present Chevrolet & GMC Truck Message Board Network

**FRENCHBLUE72** · 02-23-2010, 01:03 AM

I thought I had seen that cpp carries steering joints awhile back ina magazine anyone know if they carry the shafts and support bearings also?

Looking for a 3/4x36 spline by 3/4 dd

3/4 dd by 3/4 dd

Tx Firefighter · 02-23-2010, 07:22 AM

I've always ordered Borgesson parts for my stuff. Summit carries the whole line of their parts for great prices.

3/4x 36 spline...

http://www.summitracing.com/parts/BRG-013449/

3/4 DD x 3/4 DD...

http://www.summitracing.com/parts/BRG-014949/

dv8customs · 02-23-2010, 09:10 AM

CPP has them. I just ordered from them a couple days ago (see below from another thread). They had the lowest pricing as well. Contact Jeff at CPP and he will take care of you.

Quote:

Originally Posted by dv8customs

I am swapping my '86 over to a rack and pinion. Can you get me a price on a 1"DD by 3/4DD joint and 3/4-36 spline by 3/4DD with say 22" of DD shaft. Not sure how long of a shaft I need but 22" should do it.

Quote:

Originally Posted by CPPJEFF

No sweat $45.00 a joint and the shaft is $30.00 but its all nickle plated and it would be 36 inches. We only sell shaft in 18" and 36" inch. Thanks let me know.

**67cheby** · 02-23-2010, 11:17 AM

i have them

LMDGUY · 02-23-2010, 02:36 PM

I guess I need to call them.. SoCal has tried twice to get me the correct one for 73 C10 at the steering gear

**FRENCHBLUE72** · 02-23-2010, 06:48 PM

67 are yours cpp or borgensons?

**67cheby** · 02-23-2010, 07:58 PM

CPPs best deal around on ujoints

**FRENCHBLUE72** · 02-24-2010, 07:00 PM

Looks like im going with borgensens......

Tx Firefighter · 02-24-2010, 07:06 PM

Good choice, made in the USA since 1914.

dv8customs · 02-24-2010, 07:13 PM

What made you choose them over CPP?

**FRENCHBLUE72** · 02-24-2010, 07:13 PM

Ill keep my money here in the usa and this way they will all match... I was kinda hoping cpp jeff would have jumped in here with some insight...

DKN · 02-24-2010, 07:21 PM

CPP stocks and sells Borgenson U-joints and most of thier other parts. If you want all USA made parts let us know. Chances are we have them! We usually have premium USA parts availible along with the economy version.

Danny Nix
CPP

02-23-2010, 01:03 AM	#1
FRENCHBLUE72 PROJECT 7DEUCE Join Date: Dec 2002 Location: GRANTS PASS OR Posts: 21,591	cpp steering joints? I thought I had seen that cpp carries steering joints awhile back ina magazine anyone know if they carry the shafts and support bearings also? Looking for a 3/4x36 spline by 3/4 dd 3/4 dd by 3/4 dd __________________ GO BIG GREEN GO DUCKS MEMBER #6377 72 k-5 daily driver 6'' lift 35'' 350-350-205 slowly getting rust free. Project "7DEUCE" check out my build http://67-72chevytrucks.com/vboard/s...d.php?t=267665 Tim Powell..R.I.P EastSideLowlife..... R.I.P..

02-23-2010, 07:22 AM	#2
Tx Firefighter Watch out for your cornhole ! Join Date: Jun 2003 Location: Azle, Texas Posts: 14,162	Re: cpp steering joints? I've always ordered Borgesson parts for my stuff. Summit carries the whole line of their parts for great prices. 3/4x 36 spline... http://www.summitracing.com/parts/BRG-013449/ 3/4 DD x 3/4 DD... http://www.summitracing.com/parts/BRG-014949/ __________________ I'm on the Instagram- @Gearhead_Kevin Last edited by Tx Firefighter; 02-23-2010 at 07:22 AM.

02-23-2010, 11:17 AM	#4
67cheby 67cheby Join Date: Sep 2008 Location: siloam springs ar 72761 Posts: 17,890	Re: cpp steering joints? i have them Attached Images __________________ Check out Slosh Tubz, bolt-in inner fenders for frame laying C-10's Slosh Tubz Introductory Price $559 67 Cheby's Dropmember Build Thread Slosh Tubz on Facebook http://67-72chevytrucks.com/vboard/s...d.php?t=554172

02-23-2010, 02:36 PM	#5
LMDGUY Registered User Join Date: Jan 2008 Location: Phx,AZ Posts: 352	Re: cpp steering joints? I guess I need to call them.. SoCal has tried twice to get me the correct one for 73 C10 at the steering gear __________________ 1973 C10 "Chain Reaction" Street Trucks cover Feb 2012 2013 Silverado 1964 Cadillac

02-23-2010, 06:48 PM	#6
FRENCHBLUE72 PROJECT 7DEUCE Join Date: Dec 2002 Location: GRANTS PASS OR Posts: 21,591	Re: cpp steering joints? 67 are yours cpp or borgensons? __________________ GO BIG GREEN GO DUCKS MEMBER #6377 72 k-5 daily driver 6'' lift 35'' 350-350-205 slowly getting rust free. Project "7DEUCE" check out my build http://67-72chevytrucks.com/vboard/s...d.php?t=267665 Tim Powell..R.I.P EastSideLowlife..... R.I.P..

02-23-2010, 07:58 PM	#7
67cheby 67cheby Join Date: Sep 2008 Location: siloam springs ar 72761 Posts: 17,890	Re: cpp steering joints? CPPs best deal around on ujoints __________________ Check out Slosh Tubz, bolt-in inner fenders for frame laying C-10's Slosh Tubz Introductory Price $559 67 Cheby's Dropmember Build Thread Slosh Tubz on Facebook http://67-72chevytrucks.com/vboard/s...d.php?t=554172

02-24-2010, 07:00 PM	#8
FRENCHBLUE72 PROJECT 7DEUCE Join Date: Dec 2002 Location: GRANTS PASS OR Posts: 21,591	Re: cpp steering joints? Looks like im going with borgensens...... __________________ GO BIG GREEN GO DUCKS MEMBER #6377 72 k-5 daily driver 6'' lift 35'' 350-350-205 slowly getting rust free. Project "7DEUCE" check out my build http://67-72chevytrucks.com/vboard/s...d.php?t=267665 Tim Powell..R.I.P EastSideLowlife..... R.I.P..

02-24-2010, 07:06 PM	#9
Tx Firefighter Watch out for your cornhole ! Join Date: Jun 2003 Location: Azle, Texas Posts: 14,162	Re: cpp steering joints? Good choice, made in the USA since 1914. __________________ I'm on the Instagram- @Gearhead_Kevin

02-24-2010, 07:13 PM	#10
dv8customs Registered User Join Date: Jan 2009 Location: East Texas Posts: 1,047	Re: cpp steering joints? What made you choose them over CPP?

02-24-2010, 07:13 PM	#11
FRENCHBLUE72 PROJECT 7DEUCE Join Date: Dec 2002 Location: GRANTS PASS OR Posts: 21,591	Re: cpp steering joints? Ill keep my money here in the usa and this way they will all match... I was kinda hoping cpp jeff would have jumped in here with some insight... __________________ GO BIG GREEN GO DUCKS MEMBER #6377 72 k-5 daily driver 6'' lift 35'' 350-350-205 slowly getting rust free. Project "7DEUCE" check out my build http://67-72chevytrucks.com/vboard/s...d.php?t=267665 Tim Powell..R.I.P EastSideLowlife..... R.I.P..

02-24-2010, 07:21 PM	#12
DKN Active Member Join Date: Feb 2008 Location: Los Angles CA Posts: 136	Re: cpp steering joints? CPP stocks and sells Borgenson U-joints and most of thier other parts. If you want all USA made parts let us know. Chances are we have them! We usually have premium USA parts availible along with the economy version. Danny Nix CPP



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.