what does your truck run? - The 1947 - Present Chevrolet & GMC Truck Message Board Network

2tankin79 · 05-05-2003, 11:16 PM

If you have ran your truck, what did it run in the 1/8, and/or 1/4?
including, engine size, and gears..

i'm tryin to get a good feel of what i'm gonna run,
(next season

) i've got a 327, basically stock internals i believe, with headers, and an intake manifold..
I'm lookin for a HIGH HIGH 16, low 17.. it's got pretty good 'get up and go' power for a big truck..

Jeff

bigblock73 · 05-05-2003, 11:19 PM

When I had my 355...14.6 @ 93 MPH

350 bored 030
stock 882 heads
Edelbrock Perf RPM manifold
750 Holley
Crane roller rockers and cam
4.10 posi
th350 trans w/2200 stall
HoosierQuick Time DOTs

gchemist · 05-06-2003, 02:01 AM

Killa 305 checking in.
700R4/3.08 rear with 255/60R15s.
Best 1/4 recorded with temps in the 100+
1/4 times in 100+ degrees.
Reaction time: 0.5065
60 ft: 2.5362
330 ft: 7.1448
1/8 ET : 10.9928
1/8 MPH : 64.08
1/4 ET : 17.1033
1/4 MPH : 79.95
New times with 700R4/3.08 rear with 255/60R15s. I could not 1/4 mile since there were top fuel cars there that day. Track was only running the 1/8. See film in my signature
Reaction time: 0.7684
60 ft: 2.5803
330 ft: 7.0815
1/8 ET : 10.8483 loosing traction (10.6 dial in)
1/8 MPH : 66.01
1/4 ET : ?? guessing probably 16's
1/4 MPH : ?? guessing in the 80's

I'm trying again in June!! Anyone care to drive to Temple Texas for a truck shoot out??

85 GMC · 05-06-2003, 07:58 AM

14.43 @ 96 , that was with 3.42 gears. install 3.73's oh boy , its quicker now , hopefully ill make it to the track in a couple of weeks.

Tracy Focht · 05-06-2003, 10:18 AM

13.21 @100 MPH so far..

05-05-2003, 11:16 PM	#1
2tankin79 Registered User Join Date: May 2003 Location: indiana Posts: 288	what does your truck run? If you have ran your truck, what did it run in the 1/8, and/or 1/4? including, engine size, and gears.. i'm tryin to get a good feel of what i'm gonna run, (next season ) i've got a 327, basically stock internals i believe, with headers, and an intake manifold.. I'm lookin for a HIGH HIGH 16, low 17.. it's got pretty good 'get up and go' power for a big truck.. Jeff

05-06-2003, 02:01 AM	#3
gchemist BAD BOW-Silverado XST Join Date: May 2000 Location: Senior Member from Austin, TX Posts: 6,431	Killa 305 checking in. 700R4/3.08 rear with 255/60R15s. Best 1/4 recorded with temps in the 100+ 1/4 times in 100+ degrees. Reaction time: 0.5065 60 ft: 2.5362 330 ft: 7.1448 1/8 ET : 10.9928 1/8 MPH : 64.08 1/4 ET : 17.1033 1/4 MPH : 79.95 New times with 700R4/3.08 rear with 255/60R15s. I could not 1/4 mile since there were top fuel cars there that day. Track was only running the 1/8. See film in my signature Reaction time: 0.7684 60 ft: 2.5803 330 ft: 7.0815 1/8 ET : 10.8483 loosing traction (10.6 dial in) 1/8 MPH : 66.01 1/4 ET : ?? guessing probably 16's 1/4 MPH : ?? guessing in the 80's I'm trying again in June!! Anyone care to drive to Temple Texas for a truck shoot out?? __________________ Gerardo a.k.a. Mad Chemist Silverado XST videos

05-05-2003, 11:19 PM	#2
bigblock73 yeller Join Date: Oct 2001 Location: Twin Cities Posts: 13,824	When I had my 355...14.6 @ 93 MPH 350 bored 030 stock 882 heads Edelbrock Perf RPM manifold 750 Holley Crane roller rockers and cam 4.10 posi th350 trans w/2200 stall HoosierQuick Time DOTs

05-06-2003, 07:58 AM	#4
85 GMC Registered User Join Date: Feb 2003 Location: michigan Posts: 121	14.43 @ 96 , that was with 3.42 gears. install 3.73's oh boy , its quicker now , hopefully ill make it to the track in a couple of weeks.

05-06-2003, 10:18 AM	#5
Tracy Focht Registered User Join Date: Dec 1999 Location: Stillwater, OK 74075 Posts: 2,936	13.21 @100 MPH so far..



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.