Where can I find a set of these - The 1947 - Present Chevrolet & GMC Truck Message Board Network

198plus · 01-26-2010, 12:14 AM

After seeing the truck pics of Barrett Jackson.........I must have them.

GCncsuHD · 01-26-2010, 12:24 AM

www.stylinconcepts.com

198plus · 01-26-2010, 12:33 AM

Thanks, I'm really looking for the same as pic, these are close but I like the angle on the others.

Quote:

Originally Posted by GCncsuHD

www.stylinconcepts.com

GCncsuHD · 01-26-2010, 12:54 AM

They used to sell that exact tip you pictured, I remember seeing it a few years back.

**Captainfab** · 01-26-2010, 01:05 AM

I remember strodder put something like that on his truck. Seems like it was a Corvette part. Might look in his build thread.....it was a few months ago.

padresag · 01-26-2010, 01:14 AM

Quote:

Originally Posted by 198plus

After seeing the truck pics of Barrett Jackson.........I must have them.

it really doesn't look like it conforms to the frnder and the wheel opening
ron

198plus · 01-26-2010, 01:58 AM

Bingo...........Guess I can call these guys, they built the truck.

http://www.streetcustomandpaint.com/

GCncsuHD · 01-26-2010, 03:12 AM

Quote:

Originally Posted by 198plus

Bingo...........Guess I can call these guys, they built the truck.

http://www.streetcustomandpaint.com/

Interesting, I drive by that place all the time, but have never checked it out.

*lakeroadster* · 01-26-2010, 09:08 AM

Seems like the elliptical profile of the outer ring look better behind the tire?

Turkey · 01-26-2010, 07:37 PM

make it don't buy it

65Custom · 01-26-2010, 10:14 PM

SWEEEEEET! I also like the idea behind the rear wheel all the way back to the back of the bed panel but that is just what I think looks best.

198plus · 01-27-2010, 11:34 PM

Well........I guess I can forget about using these exhaust tips. I spoke with Jimmy today who built this truck and those tips cost.......637 dollars EACH

**Captainfab** · 01-28-2010, 12:52 AM

WHOA! I could make them for less than that.......

Quote:

Originally Posted by 198plus

Well........I guess I can forget about using these exhaust tips. I spoke with James today who built this truck and those tips cost.......637 dollars EACH

198plus · 01-28-2010, 01:20 AM

He said they are for a Dozi boat.

Quote:

Originally Posted by Captainfab

WHOA! I could make them for less than that.......

**Captainfab** · 01-28-2010, 01:29 AM

Well that explains it....marine parts are usually $$$$$

Quote:

Originally Posted by 198plus

He said they are for a Dozi boat.

63bigwinder · 01-28-2010, 04:06 AM

My buddy had a set of those tips on a Crown line. Look around at marine tips and you'll find them much cheaper.

wlevick · 02-18-2010, 10:47 PM

I love this look! Has any one found a place that will make them yet?

SCOTI · 02-18-2010, 11:19 PM

Quote:

Originally Posted by Captainfab

Well that explains it....marine parts are usually $$$$$

Ride Tech 'Cool Cap' gas cap set-up = $70
local marine parts house 'deck fill' gas cap set-up = $27

Same size.
Same material (Stainless steel).
Same keyed, o-ring seal, screw in cap.
One says more than 'gas'.... just not $40 worth more!

wlevick · 02-18-2010, 11:51 PM

Thanks ... but I was interested in the exhaust tips. From what I have been able to find this evening, they were used by Crownline boats on their LPX option - "Captain's Call - thru the hull side exhaust".

jgh64pkup · 02-19-2010, 12:01 AM

Quote:

Originally Posted by Captainfab

I remember strodder put something like that on his truck. Seems like it was a Corvette part. Might look in his build thread.....it was a few months ago.

yep dennis has some but they are single tips and he had to weld on his fender to make them fit

Apache63 · 02-24-2010, 05:30 PM

Hey , you´ll find that Exhaust Tip here:

http://www.boatstoreonline.com/corsa.html

Pat

198plus · 02-25-2010, 01:02 AM

Thanks...........I looked everywhere and couldn't find them, that price is not that bad.

wlevick · 02-25-2010, 10:00 PM

The March issue of "Street Trucks" magazine has an article on this truck on pages 134 - 136. It is titled "Back in Black...A Glamorous Life for This Retired Farm Truck". According to the article, the builder (Mike Dillion from Moorsville, NC) spent $165,000 and 13 months to turn an old farm truck in to what is arguably the baddest 1965 Chevy pickup on the planet. It has a GM Performance Ram Jet 502, Tremec TKO five-speed, Ford 9" rear, Jim Meyer racing chassis, 20 X 9 and 22 X 12 Foose wheels and more!!!! I love this truck!!!!!!!!!!!!!!!!!!!

**N2TRUX** · 02-25-2010, 11:46 PM

Quote:

Originally Posted by lakeroadster

Seems like the elliptical profile of the outer ring look better behind the tire?

Recently this has become a trend. There's a reason they exit in front of the axle. If they truck has a 4-link and especially if it's bagged with a 4 link, it's very hard to run the exhaust over the axle. There is just not enough room to make it work.

Vernski · 02-26-2010, 07:36 AM

Hey I think they look cool but at almost $700 a piece some people have more money than good sense, maybe if I win the lottery or something....Vernski

01-26-2010, 12:14 AM	#1
198plus Registered User Join Date: May 2009 Location: Loganville, Ga. Posts: 1,408	Where can I find a set of these After seeing the truck pics of Barrett Jackson.........I must have them. __________________ My Build http://67-72chevytrucks.com/vboard/s...d.php?t=346597 https://www.facebook.com/pages/198-C...1434001?ref=hl Last edited by 198plus; 01-26-2010 at 12:15 AM.

01-26-2010, 12:24 AM	#2
GCncsuHD Charlie Daniels w/ a Tq Wrench Join Date: May 2009 Location: Statesville, NC Posts: 1,570	Re: Where can I find a set of these www.stylinconcepts.com __________________ ΜΟΛΩΝ ΛΑΒΕ 67 C10 Shortbed "Great Grandpa's Truck" I6 3 on the Tree 71k original miles 5.3 swap in the works 69 K5 Blazer-Family Beach Cruiser Project 78 K30 Dually Semi-Retired Fire Truck 350/SM465 35"s SOLD01 2500HD ECSB 6.0 4x4 5.13's 8" lift 38"s

01-26-2010, 12:54 AM	#4
GCncsuHD Charlie Daniels w/ a Tq Wrench Join Date: May 2009 Location: Statesville, NC Posts: 1,570	Re: Where can I find a set of these They used to sell that exact tip you pictured, I remember seeing it a few years back. __________________ ΜΟΛΩΝ ΛΑΒΕ 67 C10 Shortbed "Great Grandpa's Truck" I6 3 on the Tree 71k original miles 5.3 swap in the works 69 K5 Blazer-Family Beach Cruiser Project 78 K30 Dually Semi-Retired Fire Truck 350/SM465 35"s SOLD01 2500HD ECSB 6.0 4x4 5.13's 8" lift 38"s

01-26-2010, 01:05 AM	#5
Captainfab 60-66 Nut Join Date: Mar 2007 Location: Coeur d'Alene, Idaho Posts: 23,246	Re: Where can I find a set of these I remember strodder put something like that on his truck. Seems like it was a Corvette part. Might look in his build thread.....it was a few months ago. __________________ Power Steering Box Adapter Plates For Sale HERE Power Brake Booster Adapter Brackets For Sale '63-'66 HERE and '67-'72 HERE and '60-'62 HERE and "60-'62 with clutch HERE Rear Disc Brake Brackets For Sale. Impala SS calipers HERE Camaro Calipers HERE D52 Calipers HERE 6 Lug HERE Hydroboost Mounting Plates HERE

01-26-2010, 01:58 AM	#7
198plus Registered User Join Date: May 2009 Location: Loganville, Ga. Posts: 1,408	Re: Where can I find a set of these Bingo...........Guess I can call these guys, they built the truck. http://www.streetcustomandpaint.com/ __________________ My Build http://67-72chevytrucks.com/vboard/s...d.php?t=346597 https://www.facebook.com/pages/198-C...1434001?ref=hl

01-26-2010, 09:08 AM	#9
lakeroadster Account Suspended Join Date: Sep 2009 Location: High Plains of Colorado Posts: 2,485	Re: Where can I find a set of these Seems like the elliptical profile of the outer ring look better behind the tire? Attached Images Last edited by lakeroadster; 01-26-2010 at 09:09 AM.

01-26-2010, 07:37 PM	#10
Turkey Registered User Join Date: Dec 2009 Location: Orlando, Florida Posts: 427	Re: Where can I find a set of these make it don't buy it __________________

01-26-2010, 10:14 PM	#11
65Custom Registered User Join Date: Apr 2009 Location: Dawson, Ga Posts: 495	Re: Where can I find a set of these SWEEEEEET! I also like the idea behind the rear wheel all the way back to the back of the bed panel but that is just what I think looks best. __________________ My Build Thread http://67-72chevytrucks.com/vboard/s...d.php?t=366677 I must be

01-27-2010, 11:34 PM	#12
198plus Registered User Join Date: May 2009 Location: Loganville, Ga. Posts: 1,408	Re: Where can I find a set of these Well........I guess I can forget about using these exhaust tips. I spoke with Jimmy today who built this truck and those tips cost.......637 dollars EACH __________________ My Build http://67-72chevytrucks.com/vboard/s...d.php?t=346597 https://www.facebook.com/pages/198-C...1434001?ref=hl Last edited by 198plus; 01-28-2010 at 01:23 AM.

01-28-2010, 04:06 AM	#16
63bigwinder Registered User Join Date: Mar 2009 Location: Ponca City, Oklahoma Posts: 12	Re: Where can I find a set of these My buddy had a set of those tips on a Crown line. Look around at marine tips and you'll find them much cheaper.

02-18-2010, 10:47 PM	#17
wlevick Registered User Join Date: Nov 2009 Location: Saint Petersburg, Florida Posts: 117	Re: Where can I find a set of these I love this look! Has any one found a place that will make them yet?

02-18-2010, 11:51 PM	#19
wlevick Registered User Join Date: Nov 2009 Location: Saint Petersburg, Florida Posts: 117	Re: Where can I find a set of these Thanks ... but I was interested in the exhaust tips. From what I have been able to find this evening, they were used by Crownline boats on their LPX option - "Captain's Call - thru the hull side exhaust".

02-24-2010, 05:30 PM	#21
Apache63 1# Drobmember in Germany Join Date: Aug 2008 Location: Wuppertal , Germany Posts: 518	Re: Where can I find a set of these Hey , you´ll find that Exhaust Tip here: http://www.boatstoreonline.com/corsa.html Pat Last edited by Apache63; 02-24-2010 at 05:30 PM.

02-25-2010, 01:02 AM	#22
198plus Registered User Join Date: May 2009 Location: Loganville, Ga. Posts: 1,408	Re: Where can I find a set of these Thanks...........I looked everywhere and couldn't find them, that price is not that bad. __________________ My Build http://67-72chevytrucks.com/vboard/s...d.php?t=346597 https://www.facebook.com/pages/198-C...1434001?ref=hl Last edited by 198plus; 02-25-2010 at 01:02 AM.

02-25-2010, 10:00 PM	#23
wlevick Registered User Join Date: Nov 2009 Location: Saint Petersburg, Florida Posts: 117	Re: Where can I find a set of these The March issue of "Street Trucks" magazine has an article on this truck on pages 134 - 136. It is titled "Back in Black...A Glamorous Life for This Retired Farm Truck". According to the article, the builder (Mike Dillion from Moorsville, NC) spent $165,000 and 13 months to turn an old farm truck in to what is arguably the baddest 1965 Chevy pickup on the planet. It has a GM Performance Ram Jet 502, Tremec TKO five-speed, Ford 9" rear, Jim Meyer racing chassis, 20 X 9 and 22 X 12 Foose wheels and more!!!! I love this truck!!!!!!!!!!!!!!!!!!!



Register or Log In To remove these advertisements.

02-26-2010, 07:36 AM	#25
Vernski Registered User Join Date: May 2009 Location: Rathdrum, Idaho Posts: 1,135	Re: Where can I find a set of these Hey I think they look cool but at almost $700 a piece some people have more money than good sense, maybe if I win the lottery or something....Vernski

Register or Log In To remove these advertisements.