How to "get to know" my axles? - The 1947 - Present Chevrolet & GMC Truck Message Board Network

Nova70 · 03-04-2010, 01:55 PM

Is there a number somewhere on my axles that would tell me exactly what my axle's are? Including what year the axle is and such? Where do I find it and where could I decode it?

Thanks,
Nova

Mudder · 03-04-2010, 02:34 PM

Axles? Is it a 4x4?

Nova70 · 03-04-2010, 03:16 PM

Yes it's a 4x4. I don't mean the actual axles, I mean the front and rear end. How do I figure out what year it is? I don't think they're original so if I can find out what year I might be able to get a rear disc set up cheap. I believe the rear is a 12 bolt but how do I know what year?

**Yukon Jack** · 03-04-2010, 03:44 PM

Post us some pics and that will be a big help.

84 400 · 03-04-2010, 05:09 PM

12 bolt could be stock. If they are six lug most likley a dana 44 front and a 12 bolt rear. But its a chevy so anything could have been swapped in

Blazer1970 · 03-04-2010, 05:20 PM

Dana axles have a BOM number stamped on the tube that will identify the year and original application.

Nova70 · 03-04-2010, 05:27 PM

I know the front axle isn't stock because my truck was a C10 from the factory. I have no clue how to tell. I looked at the axle tubes and didn't see any numbers or anything on there so I'm assuming neither are Dana's. I will get some pics tomorrow.

**special-K** · 03-04-2010, 06:04 PM

The number is on front of the tube to the left (as you look from front) of the differential housing.Are they disc brakes on front?Can you see the u-joints in the drive axles between the ball-joints?You might want to identify your transfer case as well,since it`s a conversion.For that matter,the transmission.If your truck had factory rear leafs that could be original.I`m curious beyond your axles.We can figure out how the 4wd conversion was done with the right pictures and your answers.It`s fun!!

03-04-2010, 01:55 PM	#1
Nova70 Registered User Join Date: Jun 2009 Location: Dub VC Utah Posts: 364	How to "get to know" my axles? Is there a number somewhere on my axles that would tell me exactly what my axle's are? Including what year the axle is and such? Where do I find it and where could I decode it? Thanks, Nova __________________ '70 K10-- 4" lift on 35"s-- For Sale http://www.ksl.com/index.php?sid=733...iew&ad=4578305

03-04-2010, 02:34 PM	#2
Mudder Registered User Join Date: Feb 2001 Location: East Central, MO Posts: 11,336	Re: How to "get to know" my axles? Axles? Is it a 4x4?

03-04-2010, 03:16 PM	#3
Nova70 Registered User Join Date: Jun 2009 Location: Dub VC Utah Posts: 364	Re: How to "get to know" my axles? Yes it's a 4x4. I don't mean the actual axles, I mean the front and rear end. How do I figure out what year it is? I don't think they're original so if I can find out what year I might be able to get a rear disc set up cheap. I believe the rear is a 12 bolt but how do I know what year? __________________ '70 K10-- 4" lift on 35"s-- For Sale http://www.ksl.com/index.php?sid=733...iew&ad=4578305

03-04-2010, 03:44 PM	#4
Yukon Jack Post Whore Join Date: Feb 2000 Location: Rose Hill, KS, USA Posts: 12,683	Re: How to "get to know" my axles? Post us some pics and that will be a big help. __________________ 1970 Blazer with a 400 sbc and 4" lift 1980 Pontiac Trans Am, 455 Oldsmobile 2012 Kawasaki Concours 14

03-04-2010, 05:09 PM	#5
84 400 Sb 400 club Join Date: Nov 2005 Location: NH / MA Posts: 2,741	Re: How to "get to know" my axles? 12 bolt could be stock. If they are six lug most likley a dana 44 front and a 12 bolt rear. But its a chevy so anything could have been swapped in __________________ 1984 chevy c10, built 400sb,.(SOLD) 77 K10 Project / daily driver "The Grinch" http://67-72chevytrucks.com/vboard/s...d.php?t=318363 1956 Willys Wagon (327 chevy) Project (Now Buick 225) 1980 Corvette L-48 4 speed 1992 Mustang GT built 5.0 5 speed 1985 C10 LWB Sold 1982 K10 SWB plow truck Parted out 1986 D30 M1028 fire brush truck Parted out

03-04-2010, 05:20 PM	#6
Blazer1970 Registered User Join Date: Dec 1999 Location: Old Mission, MI, USA Posts: 2,510	Re: How to "get to know" my axles? Dana axles have a BOM number stamped on the tube that will identify the year and original application. __________________ Tim

03-04-2010, 05:27 PM	#7
Nova70 Registered User Join Date: Jun 2009 Location: Dub VC Utah Posts: 364	Re: How to "get to know" my axles? I know the front axle isn't stock because my truck was a C10 from the factory. I have no clue how to tell. I looked at the axle tubes and didn't see any numbers or anything on there so I'm assuming neither are Dana's. I will get some pics tomorrow. __________________ '70 K10-- 4" lift on 35"s-- For Sale http://www.ksl.com/index.php?sid=733...iew&ad=4578305

03-04-2010, 06:04 PM	#8
special-K Special Order Join Date: Nov 2004 Location: Mt Airy, MD Posts: 85,862	Re: How to "get to know" my axles? The number is on front of the tube to the left (as you look from front) of the differential housing.Are they disc brakes on front?Can you see the u-joints in the drive axles between the ball-joints?You might want to identify your transfer case as well,since it`s a conversion.For that matter,the transmission.If your truck had factory rear leafs that could be original.I`m curious beyond your axles.We can figure out how the 4wd conversion was done with the right pictures and your answers.It`s fun!! __________________ "BUILDING A BETTER WAY TO SERVE THE USA"......67/72......"The New Breed" GMC '67 C1500 Wideside Super Custom SWB: 327/M22/3.42 posi.........."The '67" (project) GMC '72 K2500 Wideside Sierra Custom Camper: 350/TH350/4.10 Power-Lok..."The '72" (rolling) Tim "Don't call me a redneck. I'm a rough cut country gentleman" R.I.P. ~ East Side Low Life ~ El Jay ~ 72BLUZ ~ Fasteddie69 ~ Ron586 ~ 67ChevyRedneck ~ Grumpy Old Man ~



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.