Week #2 on this site for CPP! You guys are unreal to say the least!

[bosephus]

Do y'all have a swaybar application for 60-62 trucks with torsion bars?I've seen them for the rear but not the front.Thanks

[shortbed70]

I need 6lug discs for 72 spindle,super track bar, and shock relocators......But I have no money

[Camaro_nut2001]

Hey Jeff, I got my booster, M/C combo yesterday and it is AWESOME!! Thanks for all the help and great quality at a great price.

[CPPJEFF]

Originally Posted by shortbed70

I need 6lug discs for 72 spindle,super track bar, and shock relocators......But I have no money

I have the same problem! Let me know when you get some and i will help you out.

[CPPJEFF]

Originally Posted by bosephus

Do y'all have a swaybar application for 60-62 trucks with torsion bars?I've seen them for the rear but not the front.Thanks

We do not, but i know there are a few small outfits who do but not by name. Thanks

[Wrenchbender Ret]

I'd like to see an adjustable drag link for 55-59 half tons. I have never found one that the steering is in the center of the steering gear. It makes them drive much better when it is in center. Ive had to cut & shorten the drag link to solve it.
I have used many of your products & realy like them. The sway bar kits are great.
George

[gus]

Jeff Im in Santa Ana I in the middle of my LS1 Swap thanks for all the help at front counter at the CPP Store, I bought from CPP the tranny cross member, Tube perches, Adpt. plates and motor mounts, Now Im looking foward to do a nice drop or air bagged, But my problem rightnow is the same as everyone no wealthy on cash, But if you could throw a good set-up for 71 C10 2WD I will get overtime at the local In-N-Out !I need a drop !

[karl]

Damn, only 2 weeks and already 267 posts? I have CPP lowered springs for my 71 chevelle. Nice product.

[CPPJEFF]

Originally Posted by gus

Jeff Im in Santa Ana I in the middle of my LS1 Swap thanks for all the help at front counter at the CPP Store, I bought from CPP the tranny cross member, Tube perches, Adpt. plates and motor mounts, Now Im looking foward to do a nice drop or air bagged, But my problem rightnow is the same as everyone no wealthy on cash, But if you could throw a good set-up for 71 C10 2WD I will get overtime at the local In-N-Out !I need a drop !

No sweat bro! I am in the middle of thinking up some type of special on arms, I do have a 2010 special which is working well but let me know what you had in mind. Thanks

[CPPJEFF]

Originally Posted by karl

Damn, only 2 weeks and already 267 posts? I have CPP lowered springs for my 71 chevelle. Nice product.

This is site is nuts!! Man i was already busy before i joined now i am swammped!! But its all good i enjoy helping you guys.

[gus]

Originally Posted by CPPJEFF

No sweat bro! I am in the middle of thinking up some type of special on arms, I do have a 2010 special which is working well but let me know what you had in mind. Thanks

arms with the bag set up would be a nice one, but I know that stuff is too much for me, Im not going to be able to afford it.

may be what I can afford these days will be a nice spindle/coil/shocks/shock relocators package 5" front and 7" rear static drop fro my 71 2WD Blazer.

or if you offer any front and rear airbag brackets, I already have some new bags/compressor/valves etc. seating on my shelves !

just need a C-Notch,spindles,shocks and the bag brackets !

[Burb]

Well Jeff ...I do want to thank you guys for all your help in my 3/4 ton rear disc brake conversion and custom tracking work ... the master cylinder and prop valve with the suggested bias adjustment has made it all work as if that monster was meant to stop on a dime and 1/2 And the curved Pan Hard Bar cleared the new Mag-Hytec cover by a whole 1/16" awsome.

Placed an order about 6 days ago for 2" front drop springs, drop shocks and a front sway bar, and went back and added the front shock support tabs.
can't wait to feel the difference.

Only suggestion ... more order status information, you send a confirmation the order has been received ... but after that ________ and if your product doesn't ship for 2 weeks ... you wouldn't know till it did. Just makes it hard to plan the next project stage.

Not knockin' Just informin'

But Really ... Thnx CCP

_______________
Rick