1984 SWB 2WD body, stepside - The 1947 - Present Chevrolet & GMC Truck Message Board Network

**crossy** · 05-05-2003, 11:24 PM

1984 SWB, 2WD body. stock height. I tried selling just the front clip with no luck. I am
not going to sell pieces off of the front clip. Now I want to sell entire
truck together. It will have the front end and cab pictured and the stepbed
from the red truck barely visible next to it . but i have pics of the bed also.
BED= the stepside bed is nearly perfect needing only a new wooden floor, the metal bed
strips are good and there is no appreciable damage to the siderails or the
inner panels. The tailgate is a little banged up from the inside but the
new aftermarket which have no name embossed in them fit well and are
really cheap. You can also weld on a 'smoothie' or 'louvered' rear panel
to this tailgate and it would be fine . the right rear fender has some ripples in it but they are in the 'flat' area of the fender and easy to remove/fix. because there is no rust in the seams I think it would be fairly easy to make this bed show quality.
FRONT END=only the inner fenders will have to be replaced, which is typical.
I have used the generic ones and they fit fine in this application and they
are dirt cheap. I get good prices on aftermarket sheetmetal so if you want
the new inner fenders I can work them in for additional $$ This clip has a
custom front air dam (spoiler) with lights.,custom square tube grille. The
front fenders are straight, except for one small dent in right fender , and
both are rust free. hood is good also. the paint on everything is a repaint
but fairly good quality. FOLKS I don't know when the last time you checked
at GM but these fenders and all sheetmetal for these trucks. have quadrupled
in price in the last 3 years.
CAB= is about as solid as any east coast truck could be. The truck came from
the south originally. NO floor rot or cab support. There is some just
starting in the left rocker and not up into the door opening area. Cab
corners are still good. Left door has bad body done to it but is a solid
door and still saveable. Right door is fine. No rot in either just the
bottom seam inside in both is starting to seperate from sitting. The interior is nothing
great. Has a wavy dash cover installed, no gauges, typical western blanket
style seat cover over the seat. Lund sunvisor installed. No options at all
except PS. PB. and has a blown up straight 6 cyl. ,3 speed in it .
Truck Will come with a nice set of 8" rally wheels and crappy tires that
just hold air, the chrome 'mod' wheels and 60 series tires that are on it
now can POSSIBLY be purchased separately by buyer only.
Price is $1300.00 for the truck . all kinds of pics available.you won't have to guess about problem areas I described because i take pics of all that will come out. If this truck just had the rear fender and left door ripples removed and painted back to the Dupont Centari #99 jet black that the rest of the truck is ,it would be a very respectable looking daily driver. I can also help with many interior parts as I had assembled many nice burgandy interior pieces for it including a seat. prices on that stuff varies.

phone calls to 856-678-7883 need to come before 9 PM Eastern Time! I could
possibly deliver this up to 500 miles from N.J for additional costs that
would have to be discussed prior to sale. .. I live in So. N.J. and near
the Delaware Bridge . I am only 5 minutes from N.J. Turnpike exit #1.and 30 minutes south of Philadelphia airport. DAVE

**crossy** · 05-05-2003, 11:32 PM

just picture it with THIS stepside bed. OK I might consider selling it with the fleetside bed on it if your serious. tonneau cover stays here no matter what.DAVE

pugs · 05-05-2003, 11:32 PM

shoot me pics of the step side bed

**crossy** · 05-05-2003, 11:41 PM

BTW-beds are not for sale .but I would still sell the COMPLETE front clip . any questions shoot me a HOME EMAIL . all4trux@snip.net

pugs · 05-05-2003, 11:47 PM

ok i was courious about it cuz i could use a bed for my 76swb i wish i was working to buy the 84 from ya

rails52 · 05-08-2003, 06:54 PM

How much would you take for the stepside bed?

05-05-2003, 11:32 PM	#2
crossy Oh,you can't buy that new Join Date: Apr 2000 Location: Pennsville,N.J. 08070, USA Posts: 2,039	cab just picture it with THIS stepside bed. OK I might consider selling it with the fleetside bed on it if your serious. tonneau cover stays here no matter what.DAVE __________________ "been there, done that, ruined the T-shirt". 2007 LBZ GMC Sierra, ECSB 2006 LM7 RCSB Silverado 98 Vortec project. 94,3500,6.5L 4L80 81 SWB GMC POS finally gone 73 Pinto, stock, w/CragarSS's-eww LOTS of Cummins trucks. Last edited by crossy; 05-05-2003 at 11:49 PM.

05-05-2003, 11:32 PM	#3
pugs Registered User Join Date: Mar 2003 Location: Hamburg Pa Posts: 1,153	re shoot me pics of the step side bed __________________ I don't do thing cuz I can, I do it cuz someone told me it couldn't be done...

05-05-2003, 11:41 PM	#4
crossy Oh,you can't buy that new Join Date: Apr 2000 Location: Pennsville,N.J. 08070, USA Posts: 2,039	stepbed BTW-beds are not for sale .but I would still sell the COMPLETE front clip . any questions shoot me a HOME EMAIL . all4trux@snip.net __________________ "been there, done that, ruined the T-shirt". 2007 LBZ GMC Sierra, ECSB 2006 LM7 RCSB Silverado 98 Vortec project. 94,3500,6.5L 4L80 81 SWB GMC POS finally gone 73 Pinto, stock, w/CragarSS's-eww LOTS of Cummins trucks.

05-05-2003, 11:47 PM	#5
pugs Registered User Join Date: Mar 2003 Location: Hamburg Pa Posts: 1,153	re ok i was courious about it cuz i could use a bed for my 76swb i wish i was working to buy the 84 from ya __________________ I don't do thing cuz I can, I do it cuz someone told me it couldn't be done...

05-05-2003, 11:24 PM	#1
crossy Oh,you can't buy that new Join Date: Apr 2000 Location: Pennsville,N.J. 08070, USA Posts: 2,039	1984 SWB 2WD body, stepside 1984 SWB, 2WD body. stock height. I tried selling just the front clip with no luck. I am not going to sell pieces off of the front clip. Now I want to sell entire truck together. It will have the front end and cab pictured and the stepbed from the red truck barely visible next to it . but i have pics of the bed also. BED= the stepside bed is nearly perfect needing only a new wooden floor, the metal bed strips are good and there is no appreciable damage to the siderails or the inner panels. The tailgate is a little banged up from the inside but the new aftermarket which have no name embossed in them fit well and are really cheap. You can also weld on a 'smoothie' or 'louvered' rear panel to this tailgate and it would be fine . the right rear fender has some ripples in it but they are in the 'flat' area of the fender and easy to remove/fix. because there is no rust in the seams I think it would be fairly easy to make this bed show quality. FRONT END=only the inner fenders will have to be replaced, which is typical. I have used the generic ones and they fit fine in this application and they are dirt cheap. I get good prices on aftermarket sheetmetal so if you want the new inner fenders I can work them in for additional $$ This clip has a custom front air dam (spoiler) with lights.,custom square tube grille. The front fenders are straight, except for one small dent in right fender , and both are rust free. hood is good also. the paint on everything is a repaint but fairly good quality. FOLKS I don't know when the last time you checked at GM but these fenders and all sheetmetal for these trucks. have quadrupled in price in the last 3 years. CAB= is about as solid as any east coast truck could be. The truck came from the south originally. NO floor rot or cab support. There is some just starting in the left rocker and not up into the door opening area. Cab corners are still good. Left door has bad body done to it but is a solid door and still saveable. Right door is fine. No rot in either just the bottom seam inside in both is starting to seperate from sitting. The interior is nothing great. Has a wavy dash cover installed, no gauges, typical western blanket style seat cover over the seat. Lund sunvisor installed. No options at all except PS. PB. and has a blown up straight 6 cyl. ,3 speed in it . Truck Will come with a nice set of 8" rally wheels and crappy tires that just hold air, the chrome 'mod' wheels and 60 series tires that are on it now can POSSIBLY be purchased separately by buyer only. Price is $1300.00 for the truck . all kinds of pics available.you won't have to guess about problem areas I described because i take pics of all that will come out. If this truck just had the rear fender and left door ripples removed and painted back to the Dupont Centari #99 jet black that the rest of the truck is ,it would be a very respectable looking daily driver. I can also help with many interior parts as I had assembled many nice burgandy interior pieces for it including a seat. prices on that stuff varies. phone calls to 856-678-7883 need to come before 9 PM Eastern Time! I could possibly deliver this up to 500 miles from N.J for additional costs that would have to be discussed prior to sale. .. I live in So. N.J. and near the Delaware Bridge . I am only 5 minutes from N.J. Turnpike exit #1.and 30 minutes south of Philadelphia airport. DAVE __________________ "been there, done that, ruined the T-shirt". 2007 LBZ GMC Sierra, ECSB 2006 LM7 RCSB Silverado 98 Vortec project. 94,3500,6.5L 4L80 81 SWB GMC POS finally gone 73 Pinto, stock, w/CragarSS's-eww LOTS of Cummins trucks. Last edited by crossy; 05-05-2003 at 11:45 PM.

05-08-2003, 06:54 PM	#6
rails52 Registered User Join Date: Dec 2002 Location: northeast Pa. Posts: 9	How much would you take for the stepside bed?



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.