Check out what I made today - The 1947 - Present Chevrolet & GMC Truck Message Board Network

Longhorn Man · 05-04-2003, 11:46 PM

no...not a mess...although i did make a small puddle of blood.

I made a metal glove box for the one ton.
I followed someone's advice on here (can't remember who though) and removed the remains of the paper glove box and traced it out on some steel. Then took it to work and used a nibbler type cutter to cut it all out. Bend it up into the right shape, paint it black, mount it in and added a couple screws to hold the sides together.
I tried moving it around a little to see if it was going to rattle or anything and it all looks good. But I was afraid all the crap I'll put in there will rattle so i cut out some 1/16 (or so) thick rubber and glued it in.
Worked out pretty dang cool IMO.
Then, while I was at the junk yard rippin another tilt out of a van, (which resides in the GMC now) I nabbed the glove box light assembly out of it. You can't really see it in the pic, but the orange-ish light reflecting on the black paint is from the bulb.
Well worth the blood spent.
(the real awsome part is the fact I have absolutly no $$ wrapped up in this mod...just my time which isn't worth too much)

Longhorn Man · 05-04-2003, 11:47 PM

Oh, i installed these today too. The big one has been in the GMC for ever...but the little one was in the van that donated the tilt to the GMC.
The junk yard guy laughed when i showed him and told me to keep it...no charge.
I love that yard.

Low69CST · 05-04-2003, 11:50 PM

Good idea with the metal glove box, I may try to make one myself...

FILICE72C10 · 05-04-2003, 11:55 PM

not a bad idea. I once made one of wood for my 72 bug where I installed a sweet stereo. I left the old POS in the stock location to fake out some of the crooks. Well one day someone opened the trunk and took the entire wood box. Great.....I just made the stereo and CDs easy to cary for the stupid thief. Oh well it was time for a chevy anyway

crazy longhorn · 05-05-2003, 12:50 AM

I like that glovebox! Something else I need to do.....the registration is closepinned to the bottom of the dash

crazyL

SWINGSAX68 · 05-05-2003, 01:09 AM

I made one as well out of some tin. It actually looks very similar to Longhornsmails, but I took it out when I started putting in my CD player, and it's sitting at my freinds place right now. Oh...and my truck is in san antonio.....acheing with a broken heart.....and acheing for a 350

supercheyenne · 05-05-2003, 01:27 AM

Did you slide it in from the front? Or go up from under the dash?

68 Suburban · 05-05-2003, 03:34 AM

Quit making gloveboxes and get that thing on the road

67cst · 05-05-2003, 03:50 AM

i like those pedals, ive been planning on doing the same thing

*racedvl* · 05-05-2003, 02:29 PM

Quote:

Originally posted by longhornmail

(the real awsome part is the fact I have absolutly no $$ wrapped up in this mod...just my time which isn't worth too much)

And a puddle of your blood. . . So did ya make a template so when the rest of us want one, you can start pounding them out?

Longhorn Man · 05-05-2003, 11:46 PM

supercheyenne, I slit it in through the front. It wasn't screwed together yet so it was still flexible. I would not even try to do this on an asembled A/C truck.
RaceDvl, I did not. As I was tighteneing the last screws I thought about it and bout kicked my sell in the tail pipe.
All it takes though is a semi-good paper one to trace. Mine had 1/4 of the paper missin, so i just flipped it over and kept on tracing.

SEVEND2 · 05-06-2003, 12:28 AM

Not a bad idea, i just bought a new cardboard box for my 72, But now that i have the old on I may think about haveing or making an Aluminium Diamond plated one. Nice and polished.
I see your line that holds up your door, Maybe the same idea with some small fine chain looking , Make it look like a tailgate..

It only takes one to start the ball roll'n!!!

Seke69 · 05-06-2003, 05:40 AM

hey, that's super cool! what gauge of sheet did you use? I have some laying around that I could cut up and try that out, but it may be too thin (I'm guessing it's about 24gauge)...

Tynee · 05-06-2003, 10:04 AM

And the best part is, you should get at LEAST an extra 5 H.P out of that high performance gas pedal. Hehe

**COBALT** · 05-06-2003, 12:37 PM

Dude, that glove box is cool as hell. I'm going to do that myself. I have a new liner from Chevy Duty (non-ac). I'll use that instead of the old one (the old one is in bad shape).

Longhorn Man · 05-07-2003, 12:06 AM

I couldn't tell you what guage the metal is...I don't mess with sheet metal, I don't know the thicknesses.
It is thinner than the metal on your hood...I can say that. (hope it helped?)
I should get more than 5 horses...I have 2 cool pedals...That should be 10 horses right?

wHATANERD · 05-07-2003, 12:26 AM

Good Idea, on th eglovebox, however you may have to use Tenactin to keep from getting athlete's pedal.(lol)

72gmcshorty · 05-07-2003, 03:22 AM

could you post a picture of the template (with measurements) that you used so that i could make one at work? My glovebox is long gone. That would be really cool. Thanks

Warbones · 05-07-2003, 09:02 PM

Gotta love them feet. Reminds me of the days when I was riding in the back seat of my moms VW. She had those magnets they used to sell in the gumball machines along with the fuzzy feet stickers that we would as kids slap on any metal part of the dash/car.

Longhorn Man · 05-08-2003, 11:53 PM

Quote:

could you post a picture of the template (with measurements) that you used so that i could make one at work?

I wish i woulda taken measurments or something...I been getting e-mails out the ying-yang.
I kept no measurements, no template, and the cardboard one got pitched at the shop which would be long gone now.
Really sorry.

beautimus · 05-09-2003, 01:25 AM

you do know sheet metal gauge sizes, you just don't realize it.
sheet metal is sized by american wire gauge.
ex. 12 gauge wire is the same as 12 ga. sheet metal.
22 gauge wire is the same as 22 ga. sheet metal etc.

(not to be a no it all or nothin, just f.y.i.)
tony

Longhorn Man · 05-09-2003, 01:27 AM

LOL...I was hoping no one would say that...
I don't really know wire sizes either. Thick and thin...

05-04-2003, 11:46 PM	#1
Longhorn Man its all about the +6 inches Join Date: Jan 2001 Location: Hilliard Ohio Posts: 2,690	Check out what I made today no...not a mess...although i did make a small puddle of blood. I made a metal glove box for the one ton. I followed someone's advice on here (can't remember who though) and removed the remains of the paper glove box and traced it out on some steel. Then took it to work and used a nibbler type cutter to cut it all out. Bend it up into the right shape, paint it black, mount it in and added a couple screws to hold the sides together. I tried moving it around a little to see if it was going to rattle or anything and it all looks good. But I was afraid all the crap I'll put in there will rattle so i cut out some 1/16 (or so) thick rubber and glued it in. Worked out pretty dang cool IMO. Then, while I was at the junk yard rippin another tilt out of a van, (which resides in the GMC now) I nabbed the glove box light assembly out of it. You can't really see it in the pic, but the orange-ish light reflecting on the black paint is from the bulb. Well worth the blood spent. (the real awsome part is the fact I have absolutly no $$ wrapped up in this mod...just my time which isn't worth too much) Attached Images

05-04-2003, 11:47 PM	#2
Longhorn Man its all about the +6 inches Join Date: Jan 2001 Location: Hilliard Ohio Posts: 2,690	Oh, i installed these today too. The big one has been in the GMC for ever...but the little one was in the van that donated the tilt to the GMC. The junk yard guy laughed when i showed him and told me to keep it...no charge. I love that yard. Attached Images

05-04-2003, 11:50 PM	#3
Low69CST Registered User Join Date: May 2000 Location: Frankfort, Kentucky, USA Posts: 2,163	Good idea with the metal glove box, I may try to make one myself... __________________ '69 CST Short fleetside Lowered, 400 small block, 700R4, 4 wheel disc brakes, front sway bar & rear camaro sway bar (in progress) '87 V10 4x4 Short Fleetside Quad Suspension and Dual Tanks

05-04-2003, 11:55 PM	#4
FILICE72C10 Registered User Join Date: Dec 2002 Location: San Francisco, CA Posts: 270	not a bad idea. I once made one of wood for my 72 bug where I installed a sweet stereo. I left the old POS in the stock location to fake out some of the crooks. Well one day someone opened the trunk and took the entire wood box. Great.....I just made the stereo and CDs easy to cary for the stupid thief. Oh well it was time for a chevy anyway __________________ 72 C10 SWB 02 Subaru WRX 95 Nissan 240SX

05-05-2003, 12:50 AM	#5
crazy longhorn Fabricate till you "puke" Join Date: Jun 2002 Location: Ill Posts: 9,402	I like that glovebox! Something else I need to do.....the registration is closepinned to the bottom of the dash crazyL __________________ 69 longhorn,4" chop,3/5 drop, 1/2 ton suspension/disc brakes,1 1/2" body drop,steel tilt clip, 5.3/Edelbrock rpm intake/600 carb, Hooker streetrod shorties,2 1/2" exhaust/ H pipe/50's Flows , 6 spd Richmond trans,12 bolt/ 3.40 gears....

05-05-2003, 01:09 AM	#6
SWINGSAX68 Now the others dig........ Join Date: May 2002 Location: San Antonio, TX Posts: 1,520	I made one as well out of some tin. It actually looks very similar to Longhornsmails, but I took it out when I started putting in my CD player, and it's sitting at my freinds place right now. Oh...and my truck is in san antonio.....acheing with a broken heart.....and acheing for a 350 __________________ 68 Chevy C10 Stepside Black Primer 78 GMC Longbed White 09 Chevy Silverado Shortbed Granite Blue *LOOKING FOR A 67 4 DOOR IMPALA!!!Just like Sam and Dean Winchester!! 'Cause Mustangs are for p^#$ and you can fit a body in the trunk of a 67 Impala* MEMBER OF THE DRUM BRAKE CLUB Bachelor of Music in Jazz Studies Texas State University-San Marcos, TX Certified Music Educator I hope Mom is up there watching and being my Guardian Angel "I've got a fever.....and the only prescription.....IS MORE COW BELL" -The Legendary: Bruce Dickenson "F#$@ 'em up!!!!!!" -The Legendary: Rogelio Escobar TRUCKY LINKS** http://67-72chevytrucks.com/vboard/s...d.php?t=457750 http://67-72chevytrucks.com/vboard/s...d.php?t=461184 http://67-72chevytrucks.com/vboard/s...d.php?t=472848 http://67-72chevytrucks.com/vboard/s...d.php?t=417541 http://67-72chevytrucks.com/vboard/s...d.php?t=477788

05-05-2003, 01:27 AM	#7
supercheyenne Registered User Join Date: Dec 1999 Location: Newton, KS, U.S.A. Posts: 1,142	Did you slide it in from the front? Or go up from under the dash?

05-05-2003, 03:34 AM	#8
68 Suburban Registered User Join Date: Oct 2000 Location: From Chicago, Live in Phoenix, AZ Posts: 6,802	Quit making gloveboxes and get that thing on the road __________________ Just sitting here contemplating contemplation.

05-05-2003, 03:50 AM	#9
67cst i love summertime Join Date: Jul 2002 Location: Kelowna BC Posts: 4,302	i like those pedals, ive been planning on doing the same thing __________________ 1967 shortbox stepside Chevy, 365 hp 327, th400. GLOVE BOX LIGHTS FORSALE, click link for info http://67-72chevytrucks.com/vboard/s...d.php?t=273724

05-05-2003, 11:46 PM	#11
Longhorn Man its all about the +6 inches Join Date: Jan 2001 Location: Hilliard Ohio Posts: 2,690	supercheyenne, I slit it in through the front. It wasn't screwed together yet so it was still flexible. I would not even try to do this on an asembled A/C truck. RaceDvl, I did not. As I was tighteneing the last screws I thought about it and bout kicked my sell in the tail pipe. All it takes though is a semi-good paper one to trace. Mine had 1/4 of the paper missin, so i just flipped it over and kept on tracing.

05-06-2003, 12:28 AM	#12
SEVEND2 Registered User Join Date: Aug 2001 Location: Menifee, Calif, USA Posts: 2,145	Not a bad idea, i just bought a new cardboard box for my 72, But now that i have the old on I may think about haveing or making an Aluminium Diamond plated one. Nice and polished. I see your line that holds up your door, Maybe the same idea with some small fine chain looking , Make it look like a tailgate.. It only takes one to start the ball roll'n!!! __________________ With a 1972 Chevy Custom-10 Long bed w/350cid th350, (under-construction). Progress on truck so far (follow link): http://67-72chevytrucks.com/vboard/s...ad.php?t=51051 and stage 2 http://67-72chevytrucks.com/vboard/s...ad.php?t=58132 ~ "Why couldn't you have just put the bunny back in the box?" ~

05-06-2003, 05:40 AM	#13
Seke69 Space Cadet Join Date: Mar 2003 Location: Twin Cities Posts: 132	hey, that's super cool! what gauge of sheet did you use? I have some laying around that I could cut up and try that out, but it may be too thin (I'm guessing it's about 24gauge)...

05-06-2003, 10:04 AM	#14
Tynee I miss this truck. Join Date: Dec 2001 Location: Lexington, KY U.S.A. Posts: 2,863	And the best part is, you should get at LEAST an extra 5 H.P out of that high performance gas pedal. Hehe __________________ '07 GMC Acadia SLT. Sweet ride. '08 Crew Cab Z-71 short bed. Really like this truck A LOT.

05-06-2003, 12:37 PM	#15
COBALT Senior Member Join Date: Sep 2001 Location: Seattle, WA, USA Posts: 5,817	Dude, that glove box is cool as hell. I'm going to do that myself. I have a new liner from Chevy Duty (non-ac). I'll use that instead of the old one (the old one is in bad shape). __________________ '69 3/4 ton C20 2wd-350ci/TH400 '69 3/4 ton Custom 20 2wd-350ci/4sp Manual '99 2wd 5.7 Chevy Tahoe Seattle, WA.

05-07-2003, 12:06 AM	#16
Longhorn Man its all about the +6 inches Join Date: Jan 2001 Location: Hilliard Ohio Posts: 2,690	I couldn't tell you what guage the metal is...I don't mess with sheet metal, I don't know the thicknesses. It is thinner than the metal on your hood...I can say that. (hope it helped?) I should get more than 5 horses...I have 2 cool pedals...That should be 10 horses right?



Register or Log In To remove these advertisements.

05-07-2003, 12:26 AM	#17
wHATANERD Registered User Join Date: Mar 2003 Location: Uvalde, Tx Posts: 407	Good Idea, on th eglovebox, however you may have to use Tenactin to keep from getting athlete's pedal.(lol) __________________ 1969 C/10 Longbed undergoing rebuild. Old Chevy's Never Die, They Just Rust Around The Edges

05-07-2003, 03:22 AM	#18
72gmcshorty Registered User Join Date: Jul 2001 Location: North Delta, British Columbia Posts: 1,344	could you post a picture of the template (with measurements) that you used so that i could make one at work? My glovebox is long gone. That would be really cool. Thanks __________________ 1992 Gmc 2wd 1972 Chevy Blazer 2wd

05-07-2003, 09:02 PM	#19
Warbones Navel Inspector Join Date: Mar 2003 Location: Wichita, Ks Posts: 1,373	LOL Gotta love them feet. Reminds me of the days when I was riding in the back seat of my moms VW. She had those magnets they used to sell in the gumball machines along with the fuzzy feet stickers that we would as kids slap on any metal part of the dash/car. __________________ 1948 Chevy Aerosedan GONE! I think. 1984 Cadillac Fleetwood Brougham Coupe WANTED 1967 IMPALA 1967 CST C10 Long Bed with a 283

05-09-2003, 01:25 AM	#21
beautimus Registered User Join Date: Mar 2002 Location: woodstock, alabama, usa Posts: 938	hey longhornmail you do know sheet metal gauge sizes, you just don't realize it. sheet metal is sized by american wire gauge. ex. 12 gauge wire is the same as 12 ga. sheet metal. 22 gauge wire is the same as 22 ga. sheet metal etc. (not to be a no it all or nothin, just f.y.i.) tony __________________ i survived cancer and kidney stones, but my kids are killing me.

05-09-2003, 01:27 AM	#22
Longhorn Man its all about the +6 inches Join Date: Jan 2001 Location: Hilliard Ohio Posts: 2,690	LOL...I was hoping no one would say that... I don't really know wire sizes either. Thick and thin...

Register or Log In To remove these advertisements.