pass side sport mirror ?s - The 1947 - Present Chevrolet & GMC Truck Message Board Network

386kustoms · 03-13-2010, 08:24 PM

i just bought a pair of mirrors from all our fav auction site and i mounted the drivers one fine, look good and i can see good through it. now the pass is a totally different story. i have it in the right place and when it is turned all the way in i still cant see my bedside on the truck. i almost have to put my head in the center of the cab to see the bedside. is this common with these mirrors? am i going to have to install it basikly just for looks?

70Custom10Nut · 03-13-2010, 08:31 PM

I did the same, and in order to see out of it I have to tilt it all the way in to see. It took me a while to get used to it (my old ones were "big as barn doors") but the look is much better. Cnut

386kustoms · 03-13-2010, 09:17 PM

yes but even with mine tilted all the way in i still cant really see that good its like it needs to tilt in just a little more

**LockDoc** · 03-13-2010, 11:08 PM

-
I had trouble with the one on the Red/White 4x4. Same problem. If I do another set I am going to try and move the pass. side forward a little bit. That should help.

LockDoc

**mikey531** · 03-14-2010, 06:06 AM

I just did a search for sport mirror mounting,

http://67-72chevytrucks.com/vboard/s...irror+location

http://67-72chevytrucks.com/vboard/s...d.php?t=179279

Jeffs70 · 03-14-2010, 07:04 AM

Have you tried holding the base and spinning the mirror its self around and then tilting the mirror in and seeing if there is any difference, If I am correct the mirror should be spun around a certain direction to tilt farther.

DZL1 · 03-14-2010, 08:09 AM

I have the same issues with mine. What I did was mount the pass side mirror just a little higher and little more forward than it says on the instructions. I did a search on this topic and that's were I found that info to do it on mine. Hope this helps.

DZL1.

386kustoms · 03-14-2010, 09:38 AM

if you turn it around it is worse lol i havent mounted it yet but im going outside again to see if i can make it a little better, it may just be poor quality aftermarket

**LockDoc** · 03-14-2010, 03:28 PM

[QUOTE=mikey531;3859357]I just did a search for sport mirror mounting,

Those are what I used to mount the ones on the Red/White 4x4 and it didn't work on the pass side.

LockDoc

03-13-2010, 08:24 PM	#1
386kustoms Registered User Join Date: Feb 2009 Location: deland florida Posts: 117	pass side sport mirror ?s i just bought a pair of mirrors from all our fav auction site and i mounted the drivers one fine, look good and i can see good through it. now the pass is a totally different story. i have it in the right place and when it is turned all the way in i still cant see my bedside on the truck. i almost have to put my head in the center of the cab to see the bedside. is this common with these mirrors? am i going to have to install it basikly just for looks?

03-13-2010, 08:31 PM	#2
70Custom10Nut Registered User Join Date: Sep 2007 Location: Vilseck Germany (currently) Posts: 317	Re: pass side sport mirror ?s I did the same, and in order to see out of it I have to tilt it all the way in to see. It took me a while to get used to it (my old ones were "big as barn doors") but the look is much better. Cnut

03-13-2010, 09:17 PM	#3
386kustoms Registered User Join Date: Feb 2009 Location: deland florida Posts: 117	Re: pass side sport mirror ?s yes but even with mine tilted all the way in i still cant really see that good its like it needs to tilt in just a little more

03-13-2010, 11:08 PM	#4
LockDoc The Older Generation Join Date: Aug 2006 Location: Montezuma, Iowa Posts: 25,395	Re: pass side sport mirror ?s - I had trouble with the one on the Red/White 4x4. Same problem. If I do another set I am going to try and move the pass. side forward a little bit. That should help. LockDoc __________________ Leon Locksmith, Specializing In Antique Trucks, Automobiles, & Motorcycles (My Dually Pickup Project Thread) http://67-72chevytrucks.com/vboard/s...d.php?t=829820 -

03-14-2010, 06:06 AM	#5
mikey531 Senior Member Join Date: Jul 2009 Location: Exeter, NH Posts: 786	Re: pass side sport mirror ?s I just did a search for sport mirror mounting, http://67-72chevytrucks.com/vboard/s...irror+location http://67-72chevytrucks.com/vboard/s...d.php?t=179279

03-14-2010, 07:04 AM	#6
Jeffs70 Registered User Join Date: Oct 2007 Location: Valley Springs, Ca Posts: 857	Re: pass side sport mirror ?s Have you tried holding the base and spinning the mirror its self around and then tilting the mirror in and seeing if there is any difference, If I am correct the mirror should be spun around a certain direction to tilt farther.

03-14-2010, 08:09 AM	#7
DZL1 One day..... Join Date: Aug 2008 Location: Ocala, FL. Posts: 702	Re: pass side sport mirror ?s I have the same issues with mine. What I did was mount the pass side mirror just a little higher and little more forward than it says on the instructions. I did a search on this topic and that's were I found that info to do it on mine. Hope this helps. DZL1.

03-14-2010, 09:38 AM	#8
386kustoms Registered User Join Date: Feb 2009 Location: deland florida Posts: 117	Re: pass side sport mirror ?s if you turn it around it is worse lol i havent mounted it yet but im going outside again to see if i can make it a little better, it may just be poor quality aftermarket

03-14-2010, 03:28 PM	#9
LockDoc The Older Generation Join Date: Aug 2006 Location: Montezuma, Iowa Posts: 25,395	Re: pass side sport mirror ?s [QUOTE=mikey531;3859357]I just did a search for sport mirror mounting, Those are what I used to mount the ones on the Red/White 4x4 and it didn't work on the pass side. LockDoc __________________ Leon Locksmith, Specializing In Antique Trucks, Automobiles, & Motorcycles (My Dually Pickup Project Thread) http://67-72chevytrucks.com/vboard/s...d.php?t=829820 -



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.