T-case Shift pattern - The 1947 - Present Chevrolet & GMC Truck Message Board Network

minime's 68' · 03-04-2010, 10:00 PM

I just got done putting a 241C T-case in my 68' I'm not sure what the shift pattern is. Any Help is much appreciated!!

msgross · 03-04-2010, 11:03 PM

why a driver side drop chain driven transfer case?

84 400 · 03-05-2010, 03:06 AM

ford 60 front??

Blazer1970 · 03-05-2010, 07:34 AM

IIRC

dash

4 low
neutral
2 hi
4 hi

seat

minime's 68' · 03-05-2010, 09:22 AM

the reason i went with the 241 is cause i put a 98' vortec motor in with a 4L80E tranny. thanks for all your help

FLEET72 · 03-05-2010, 10:52 AM

In my '89 sub it is;

2H
4H
N
4L

From http://www.high-impact.net/transmiss...case_NP241.htm

Quote:

In 1988, GM began using the NP241 transfer cases. Most of these units will be right hand drop, but Chevy also used a few left hand drop applications. The Chevy NP241 is supplied with a 27 spline female input or a 32 spline female input. With a T350, 4L60E or 700R4 tranny, it will be 27 spline. With a T400 or 4L80E trans or 5 speed, it will be 32 spline.

scooter122983 · 03-05-2010, 11:37 AM

Quote:

Originally Posted by Blazer1970

IIRC

dash

4 low
neutral
2 hi
4 hi

seat

Thats the pattern for a 205. The 241 is from the dash 2-4 hi-n-4 lo

Blazer1970 · 03-05-2010, 04:42 PM

Quote:

Originally Posted by scooter122983

Thats the pattern for a 205. The 241 is from the dash 2-4 hi-n-4 lo

It is also the pattern for the NP261 in my '01 2500HD. I couldn't remember if they reversed the pattern with the 241 shifter or not. My '88 4X4 is but a distant memory now.

minime's 68' · 03-05-2010, 09:47 PM

Thanks for all the input! I'm new to this but I'm having a blast!

minime's 68' · 03-14-2010, 05:47 PM

whooo hoo figured it out the hard way! Dash, 2, 4hi, N, 4L Thanks for all the help!

03-04-2010, 10:00 PM	#1
minime's 68' Registered User Join Date: May 2007 Location: Utah Posts: 53	T-case Shift pattern I just got done putting a 241C T-case in my 68' I'm not sure what the shift pattern is. Any Help is much appreciated!!

03-04-2010, 11:03 PM	#2
msgross Registered User Join Date: Jul 2006 Location: Central PA Posts: 12,201	Re: T-case Shift pattern why a driver side drop chain driven transfer case? __________________ The Garage: 1968 K-10 SWB - "Project Money Pit" 1996 Z-71 - "huntin rig" 1969 C-10 LWB (SOLD) "Project flip that truck or else" 1993 Passport, F@rd 1-ton (SOLD)"Project Cousin Eddie" My Garage Build "The 1,000 footer"

03-05-2010, 03:06 AM	#3
84 400 Sb 400 club Join Date: Nov 2005 Location: NH / MA Posts: 2,746	Re: T-case Shift pattern ford 60 front?? __________________ 1984 chevy c10, built 400sb,.(SOLD) 77 K10 Project / daily driver "The Grinch" http://67-72chevytrucks.com/vboard/s...d.php?t=318363 1956 Willys Wagon (327 chevy) Project (Now Buick 225) 1980 Corvette L-48 4 speed 1992 Mustang GT built 5.0 5 speed 1985 C10 LWB Sold 1982 K10 SWB plow truck Parted out 1986 D30 M1028 fire brush truck Parted out

03-05-2010, 07:34 AM	#4
Blazer1970 Registered User Join Date: Dec 1999 Location: Old Mission, MI, USA Posts: 2,507	Re: T-case Shift pattern IIRC dash 4 low neutral 2 hi 4 hi seat __________________ Tim

03-05-2010, 09:22 AM	#5
minime's 68' Registered User Join Date: May 2007 Location: Utah Posts: 53	Re: T-case Shift pattern the reason i went with the 241 is cause i put a 98' vortec motor in with a 4L80E tranny. thanks for all your help

03-05-2010, 09:47 PM	#9
minime's 68' Registered User Join Date: May 2007 Location: Utah Posts: 53	Re: T-case Shift pattern Thanks for all the input! I'm new to this but I'm having a blast!

03-14-2010, 05:47 PM	#10
minime's 68' Registered User Join Date: May 2007 Location: Utah Posts: 53	Re: T-case Shift pattern whooo hoo figured it out the hard way! Dash, 2, 4hi, N, 4L Thanks for all the help!



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.