72 GMC 3/4 ton 4x4 project or parts (Sierra Grande) - The 1947 - Present Chevrolet & GMC Truck Message Board Network

veedublu · 05-03-2003, 12:55 AM

Hey all,

I've got a '72 GMC that needs a new home. It's a 3/4 ton 4x4, and is a Sierra Grande. It also has very little rust, being a Colorado truck, although the right bedside and driver's door are dented. Engine is a 350, condition unknown. I believe it to be the factory engine although I haven't looked for numbers. Auto transmission, NP205 t-case, power-lok rear axle. Has 3 fuel tanks... one behind seat, factory auxiliary tank, and aftermarket auxiliary tank.

Has power steering and power disc brakes. Tilt column and tach dash have been replaced with "plain" parts. New column doesn't have a shifter, so there is not currently a way to shift the transmission

Truck is complete except for distributor, plug wires, radiator hoses... I think pretty much everything else is there.

All glass is good. I have many more photos so if you are seriously interested, I can email them to you (please don't ask for more pics if you have no intentions of buying the truck)

I don't have a title for the truck. Asking $800. Located in Colorado Springs, and I can deliver locally.

John

**67sss** · 05-03-2003, 01:33 AM

sent you a PM

jabarlow · 05-03-2003, 10:59 AM

Can a clear title be obtained for this truck if so i am interested seriously interested

veedublu · 05-03-2003, 12:42 PM

I'm not going to attempt to get a title for it... it is sold like I listed it, without a title.

I was supposed to get a title when I bought it, and now can't get ahold of the guy I bought it from.

However, I don't think there would be any problems in getting one... it is a somewhat long process (you have to "bond for title", etc) but it can be done.

Let me know if you're still interested

**jerry moss** · 05-03-2003, 07:36 PM

John,
would you consider california local ? just kidding. looks like a heck of a deal for someone. are those factory tow hooks i see hanging under the front ? option # V76 on the glovebox door.if they are factory, would you consider selling them off the truck ?

**Ironhorse** · 05-03-2003, 07:51 PM

Looks like a good starter project for a 4x4. $800 seems like a nice price for it. If you do not sell are you going to part it out? If so I would be interested in the front bumper guards depending on price and condition. Looking for a original set for my 71 4x4. Keep me in mind if you decide to part out the truck. Thanks

teeitup · 05-03-2003, 10:05 PM

Oh my I would be interested but I don't have the time right now to come to Colorado. I need to do some checking on someone to haul it. Do you know anyone that hauls to Kansas from out there? Thanks Randy

teeitup · 05-03-2003, 10:07 PM

If you part it put me in line for the tow hooks for sure, Thanks Randy

jabarlow · 05-03-2003, 10:07 PM

if you will deliver I will take it

jabarlow · 05-03-2003, 10:13 PM

pm sent

jabarlow · 05-04-2003, 05:47 PM

John ,if you could please e-mail about this truck at jabarlo@qwest.com

veedublu · 05-04-2003, 08:19 PM

Sorry about the delay in response guys....

Yep, sure looks like the GMC has tow hooks... if somebody buys the whole truck they get them. If I decide to part it out they'll be available.

If I do end up parting the truck, I'll reply to those who have contacted me about tow hooks, bumper guards, etc, but will also start a new thread here

Thanks for all the interest!

John

llama · 05-05-2003, 09:07 PM

sent you pm

714x4lover · 05-09-2003, 06:41 PM

is it sold yet if not email pics of other side ,inside ,engine, front thants how far are you from showlow az

jabarlow · 05-09-2003, 08:50 PM

I bought this truck today

veedublu · 05-09-2003, 10:53 PM

Yep, the truck is officially sold. Thanks again for all the interest!

John

05-03-2003, 12:55 AM	#1
veedublu Registered User Join Date: Jul 2001 Location: Colorado Springs Posts: 159	72 GMC 3/4 ton 4x4 project or parts (Sierra Grande) Hey all, I've got a '72 GMC that needs a new home. It's a 3/4 ton 4x4, and is a Sierra Grande. It also has very little rust, being a Colorado truck, although the right bedside and driver's door are dented. Engine is a 350, condition unknown. I believe it to be the factory engine although I haven't looked for numbers. Auto transmission, NP205 t-case, power-lok rear axle. Has 3 fuel tanks... one behind seat, factory auxiliary tank, and aftermarket auxiliary tank. Has power steering and power disc brakes. Tilt column and tach dash have been replaced with "plain" parts. New column doesn't have a shifter, so there is not currently a way to shift the transmission Truck is complete except for distributor, plug wires, radiator hoses... I think pretty much everything else is there. All glass is good. I have many more photos so if you are seriously interested, I can email them to you (please don't ask for more pics if you have no intentions of buying the truck) I don't have a title for the truck. Asking $800. Located in Colorado Springs, and I can deliver locally. John Attached Images

05-03-2003, 10:59 AM	#3
jabarlow Registered User Join Date: Dec 2002 Location: DENVER, CO Posts: 90	Can a clear title be obtained for this truck if so i am interested seriously interested __________________ 72 Chevy K10 Short Stepside 72 gmc K2500

05-03-2003, 07:36 PM	#5
jerry moss Born Psycho Join Date: Feb 2001 Location: brentwood,cal,usa Posts: 4,942	John, would you consider california local ? just kidding. looks like a heck of a deal for someone. are those factory tow hooks i see hanging under the front ? option # V76 on the glovebox door.if they are factory, would you consider selling them off the truck ? __________________ jerry moss 72 cheyenne super K20- tilt,tach,vacuum,speedwarning,buckets,shoulder belts,am/fm,tow hooks,bumper guards,toolbox,aux. fuel tank,posi front and rear,plus other goodies!!! SOLD 69 suburban K20-tilt,tach,vacuum,speedwarning,buckets,shoulder belts,am/fm,4 inch all spring lift,4 speed, 14 bolt full floater, dana 44 HD,warn winch,posi front and rear,tow hooks,plus other goodies. 73/80 chevy/gmc K20 SB400,turbo 400,205,tilt,a-c,gas hog. 77 K/5 cheyenne blazer-daily driver/beater. SON HAS IT NOW BRENTWOOD,CALIFORNIA

05-03-2003, 07:51 PM	#6
Ironhorse Senior Member Join Date: Jul 2001 Location: Wellington, Ks Posts: 10,294	Looks like a good starter project for a 4x4. $800 seems like a nice price for it. If you do not sell are you going to part it out? If so I would be interested in the front bumper guards depending on price and condition. Looking for a original set for my 71 4x4. Keep me in mind if you decide to part out the truck. Thanks __________________ 1971 Chevy 1/2T 4x4 LWB 350 V-8 Was sm465-now 350TH/np205 Tilt, Tach, Towhooks Original Truck AM/FM Wellington, Ks

05-03-2003, 10:05 PM	#7
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,395	Oh my I would be interested but I don't have the time right now to come to Colorado. I need to do some checking on someone to haul it. Do you know anyone that hauls to Kansas from out there? Thanks Randy __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure"

05-03-2003, 01:33 AM	#2
67sss Registered User Join Date: Nov 2002 Location: Mt. Vernon, WA.. Posts: 2,325	sent you a PM

05-03-2003, 12:42 PM	#4
veedublu Registered User Join Date: Jul 2001 Location: Colorado Springs Posts: 159	I'm not going to attempt to get a title for it... it is sold like I listed it, without a title. I was supposed to get a title when I bought it, and now can't get ahold of the guy I bought it from. However, I don't think there would be any problems in getting one... it is a somewhat long process (you have to "bond for title", etc) but it can be done. Let me know if you're still interested

05-03-2003, 10:07 PM	#8
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,395	If you part it put me in line for the tow hooks for sure, Thanks Randy __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure"

05-03-2003, 10:07 PM	#9
jabarlow Registered User Join Date: Dec 2002 Location: DENVER, CO Posts: 90	if you will deliver I will take it __________________ 72 Chevy K10 Short Stepside 72 gmc K2500

05-03-2003, 10:13 PM	#10
jabarlow Registered User Join Date: Dec 2002 Location: DENVER, CO Posts: 90	pm sent __________________ 72 Chevy K10 Short Stepside 72 gmc K2500

05-04-2003, 05:47 PM	#11
jabarlow Registered User Join Date: Dec 2002 Location: DENVER, CO Posts: 90	John ,if you could please e-mail about this truck at jabarlo@qwest.com __________________ 72 Chevy K10 Short Stepside 72 gmc K2500

05-04-2003, 08:19 PM	#12
veedublu Registered User Join Date: Jul 2001 Location: Colorado Springs Posts: 159	Sorry about the delay in response guys.... Yep, sure looks like the GMC has tow hooks... if somebody buys the whole truck they get them. If I decide to part it out they'll be available. If I do end up parting the truck, I'll reply to those who have contacted me about tow hooks, bumper guards, etc, but will also start a new thread here Thanks for all the interest! John

05-05-2003, 09:07 PM	#13
llama Senior Member Join Date: Jul 2002 Location: northern IL. Posts: 263	sent you pm

05-09-2003, 06:41 PM	#14
714x4lover Registered User Join Date: Jun 2002 Location: Show Low, Arizona Posts: 211	truck is it sold yet if not email pics of other side ,inside ,engine, front thants how far are you from showlow az

05-09-2003, 08:50 PM	#15
jabarlow Registered User Join Date: Dec 2002 Location: DENVER, CO Posts: 90	I bought this truck today __________________ 72 Chevy K10 Short Stepside 72 gmc K2500



Register or Log In To remove these advertisements.

05-09-2003, 10:53 PM	#16
veedublu Registered User Join Date: Jul 2001 Location: Colorado Springs Posts: 159	Yep, the truck is officially sold. Thanks again for all the interest! John

Register or Log In To remove these advertisements.