2004 yukon xl tranny slipping

[clinebarger]

You can run dexron III fluid in any and all 4L60E/65E transmissions with no problem.

[Black 95 TSI]

I just got done putting a Jaspers in my 2000. I am running BG syn in my truck

[truckdude239]

Originally Posted by clinebarger

You can run dexron III fluid in any and all 4L60E/65E transmissions with no problem.

yeah but it is getting harder to find and gm now recommends the dexron6

[clinebarger]

Originally Posted by truckdude239

yeah but it is getting harder to find and gm now recommends the dexron6

I use alot of dexronIII I havnt had trouble buying it. DexronVI is for the new 6 speed autos & if i had one i whould use it. Im not going to let GM dictate that I need a more expensive ATF in a 4L60E when dexronIII worked good for so long.

[neo297]

Well I'm being told it will be $3500 parts and labor for a gm from the dealer rebuilt 4l60e installed labor included(about $700) this is with 3 yr 100,000 mile warranty or he can get me a localy rebuilt 90 day warranty tranny for 2400 plus labor or a junkyard pull " low milage non rebuilt" for 2200 both plus labor to install. I do not have that much at this moment so it will wait for a liitle but wanted to pass on the prices I was given. Unfortunately I live out in the country so my options are limited.
Paul

[lyrikz]

Originally Posted by neo297

Well I'm being told it will be $3500 parts and labor for a gm from the dealer rebuilt 4l60e installed labor included(about $700) this is with 3 yr 100,000 mile warranty or he can get me a localy rebuilt 90 day warranty tranny for 2400 plus labor or a junkyard pull " low milage non rebuilt" for 2200 both plus labor to install. I do not have that much at this moment so it will wait for a liitle but wanted to pass on the prices I was given. Unfortunately I live out in the country so my options are limited.
Paul

Do this.
Order a rebuild online and then install it yourself. Save you quite a bit of money...

Do me a favor, get me the year, make, model and vin if you feel safe. I can tell you exactly what fluid you want.

[neo297]

Originally Posted by lyrikz

Do this.
Order a rebuild online and then install it yourself. Save you quite a bit of money...

Do me a favor, get me the year, make, model and vin if you feel safe. I can tell you exactly what fluid you want.

2004 yukon xl 1/2 ton L59 flex fuel 5.3l with stabilitrac all wheel drive top of the line traction control engine mngmt system 3.73 rear gear "heavy duty trailering equiptment pkg"?transfer case #az91d dont have the vin written in this book i have with me if needed i can post later. Who do you reccomend that wont cost arm and a leg to ship to dallas area. I have no lift at home just ramps and air compressor with a few tools normal assortment of hand tools any special tools needed and can a tranny lift be rented? Thanks
Paul

[clinebarger]

GM recommends Dexron III to 06. PM me if you want to and ill recommend some shops, 90 day warrenty is a joke.

[lyrikz]

Originally Posted by neo297

2004 yukon xl 1/2 ton L59 flex fuel 5.3l with stabilitrac all wheel drive top of the line traction control engine mngmt system 3.73 rear gear "heavy duty trailering equiptment pkg"?transfer case #az91d dont have the vin written in this book i have with me if needed i can post later. Who do you reccomend that wont cost arm and a leg to ship to dallas area. I have no lift at home just ramps and air compressor with a few tools normal assortment of hand tools any special tools needed and can a tranny lift be rented? Thanks
Paul

I dont care what anyone says here. Use Dextron 6.