|
Register or Log In To remove these advertisements. |
|
|
|
|||||||
 |
|
|
Thread Tools | Display Modes |
05-10-2003, 09:11 PM
|
#1 |
|
Registered User
Join Date: Mar 2002
Location: Bondurant, IA but in Worcester, MA for school
Posts: 767
|
TH350 Shift Kit Installation Difficulty??
I was wondering how hard it is to install a shift kit in a TH350? How much would it cost to get a shop to put one in? I am probably gonna get the B&M Street/Strip Shift kit i think. Are there any others out there that are better? I want the one that will shift the hardest and firmest. Let me know of your experiences. Thanks
HotRod
__________________
1970 Chevy C-20 350 V-8 Turbo 350 w/ shift kit Dana 60 w/ 4.10 gears AND Powr-Loc POSI New Additions: Summit Headers 135amp alternator Proform HEI Edelbrock 1406 600cfm carb Sunpro Tach Powr-Loc POSI Edelbrock Performer RPM Intake MSD 6A Ignition Box AIM: HotRod929 Visit My Site: http://1970chevy.netfirms.com/ |
|
|
|
05-10-2003, 09:47 PM
|
#2 |
|
Registered User
Join Date: Jan 2001
Location: Killingworth, CT. USA
Posts: 3,378
|
I've installed the B&M kits in the 350 and 700R4. No worries mate, study the instructions, keep tools and parts clean. If you can, lift and support vehicle, drop pan and let trans drain over night before you attempt job, it helps to have less ATF dripping in your face. Taking your time, you should be road testing within 3 hours.
__________________
1971 C10 swb stepside 350/700R4/3.73posi (retired as of 4/22/03) 1998 S10 short bed 2002 S10 Blazer 1942 Oldsmobile 1958 Massey Harris Pony 1951 Wife Killingworth, Connecticut May those who love us, love us, any of those who do not love us, may God turn their hearts. And if God is unable to turn their hearts, may he turn their ankles so we may know them by their limping. A man who works with his hands is a laborer; a man who works with his hands and his brain is a craftsman; but a man who works with his hands and his brain and his heart is an artist. |
|
|
|
|
05-10-2003, 10:07 PM
|
#3 |
|
Registered User
Join Date: Mar 2002
Location: Bondurant, IA but in Worcester, MA for school
Posts: 767
|
I was just looking at the B&M Transpak Kits and saw that they had a Full Competition kit with extreamly hard shifts and kinda liked the sound of that. What is better the B&M Shift Kits or The B&M Transpak kits? Thanks
HotRod
__________________
1970 Chevy C-20 350 V-8 Turbo 350 w/ shift kit Dana 60 w/ 4.10 gears AND Powr-Loc POSI New Additions: Summit Headers 135amp alternator Proform HEI Edelbrock 1406 600cfm carb Sunpro Tach Powr-Loc POSI Edelbrock Performer RPM Intake MSD 6A Ignition Box AIM: HotRod929 Visit My Site: http://1970chevy.netfirms.com/ |
|
|
|
|
05-10-2003, 11:13 PM
|
#4 |
|
Registered User
Join Date: Jan 2003
Location: Charlotte, NC
Posts: 92
|
i think i put the trans pack in mine it came with the valve body plates like the shift kit did but it also came with different springs for the valve body. As far as the comp kit gose i think that only shifts at WOT, i think the kit has all 3 types in it, RV, street strip and Competition, i did street strip, took me about an houre and half then
__________________
http://community.webshots.com/user/ericguy320 1972 Chevy C10 SOLD  1972 k5 blazer cst 350, sm465, rust 1993 gmc Typhoon for sale $13,900 obo 1980 Ironhead Sportster |
|
|
|
|
| Bookmarks |
|
|
Linear Mode
