TX WTB 72 SBC 1/2 ton Ram horn manifolds - The 1947 - Present Chevrolet & GMC Truck Message Board Network

**WIDESIDE72** · 03-16-2010, 08:58 PM

I believe that the factory SBC ram horn manifolds for a 72 1/2 ton 2wd truck angle to the back, not drop straight down (?) This is what I am looking for. Trying to find something cheaper than the $100+/ pair for repros.

68lowburb · 03-16-2010, 09:57 PM

might have a set have to check tommorow and see ,do they both angle back ? thanks jimmy

**WIDESIDE72** · 03-17-2010, 07:56 PM

Quote:

Originally Posted by 68lowburb

might have a set have to check tommorow and see ,do they both angle back ? thanks jimmy

Not sure if both angle back on a stock set up or not... The engine I am using is a mid 80's and came out of a 71 4x4 and had a set of ram horn's with a stright drop. It seems to me that there would be more restriction with a straight set, since the exhaust pipe will have to have a 90 degree bend.

68lowburb · 03-17-2010, 08:00 PM

hey ,checked mine today on a 71 350 came out of a pickup both angle towards the back,if its what you need 75 plus shipping ? let me know if you need pic can get it tomorow thanks jimmy

**WIDESIDE72** · 03-17-2010, 08:03 PM

Quote:

Originally Posted by 68lowburb

hey ,checked mine today on a 71 350 came out of a pickup both angle towards the back,if its what you need 75 plus shipping ? let me know if you need pic can get it tomorow thanks jimmy

Pics would be good. Obviously I would like to have a pair without cracks and decent studs...

68lowburb · 03-17-2010, 08:20 PM

no cracks that i saw and studs looked good drivers side has heat sheild for riser to, will get you pics tommorow be about the same time thanks jimmy

68lowburb · 03-18-2010, 09:57 PM

here are the pics ,if interested i could media blast and paint for extra 25 thanks jimmy

**WIDESIDE72** · 03-18-2010, 10:18 PM

They look good. How well does paint hold up on these? I usually run them w/ out paint... I think I saw that Eastwood or someone similar had some sort of coating for cast rion manifolds that could be rubbed on the keep them from rusting and looking so nasty...How much to just media blast and ship to Leander TX 78641?

**WIDESIDE72** · 03-18-2010, 10:19 PM

How much for the stock valve covers, if they are for sale?

68lowburb · 03-18-2010, 10:21 PM

Will do 120 plus shipping for everything and i will blast manifolds and covers and paint the covers chevy orange let me know thanks jimmy

**WIDESIDE72** · 03-19-2010, 06:40 PM

I don't need the VC's blasted. How much for the manifolds blasted, VC's as is, all shipped to Leander TX 78641?

Steve

68lowburb · 03-19-2010, 07:38 PM

steve will try and get them boxed tommorow and get shipping quote and give you a total thanks jimmy

OhOneWS6 · 03-19-2010, 08:14 PM

Quote:

Originally Posted by WIDESIDE72

Not sure if both angle back on a stock set up or not... The engine I am using is a mid 80's and came out of a 71 4x4 and had a set of ram horn's with a stright drop. It seems to me that there would be more restriction with a straight set, since the exhaust pipe will have to have a 90 degree bend.

Not trying to change your plans but those manifolds without the kink are the more desirable better flowing ones. The ones with the kink are the correct for you 72 though.

CSGAS · 03-19-2010, 09:25 PM

My dad has used the Eastwood stuff on a few manifolds, it needs recoating every few years but it looks good and does prevent rust, does not flake off or have any silly behavior. Applying it with a disposable foam brush seems to work best and you don't have to feel bad about not being able to reuse a brush for anything else.

I'm not sure if protocol allows me to ask, but if neither of you wants those spark plug shields I'll take at least one of the "humped" ones (with the hole for the water temp sensor). the resto places make a set of 4 flat one but not those and it looks like you have two on that engine, sounds like Jimmy you're trying to get rid of the whole thing...if this line of conversation should be moved to a whole new thread I'll be happy to comply.

68lowburb · 03-19-2010, 09:28 PM

cs gas if you want them there are yours for the shipping thanks jimmy

**WIDESIDE72** · 03-20-2010, 10:14 AM

68lowburb, Does the engine you are pulling the manifolds off of happen to have a timing pointer that is compatible with a 6-3/4" diameter balancer?

68lowburb · 03-21-2010, 12:19 AM

dont know will check sunday and see ,manifolds and covers 125 shipped as is or 135 for manifolds blasted and shipped thanks jimmy

GMC AMI · 03-21-2010, 07:46 AM

Here is what I have. PICS did not come out the best because of the sunlight.
Very nice set. Replaced one stud that was missing. No cracks or damage of any kind.

**WIDESIDE72** · 03-24-2010, 10:23 PM

GMC AMI I will pass. I have a trade pending with 68l0wburb.

03-16-2010, 08:58 PM	#1
WIDESIDE72 Senior Member Join Date: Aug 2008 Location: Cedar Park, Texas Posts: 7,500	WTB 72 SBC 1/2 ton Ram horn manifolds I believe that the factory SBC ram horn manifolds for a 72 1/2 ton 2wd truck angle to the back, not drop straight down (?) This is what I am looking for. Trying to find something cheaper than the $100+/ pair for repros.

03-16-2010, 09:57 PM	#2
68lowburb Registered User Join Date: Sep 2006 Location: prairieville, louisiana Posts: 883	Re: WTB 72 SBC 1/2 ton Ram horn manifolds might have a set have to check tommorow and see ,do they both angle back ? thanks jimmy

03-17-2010, 08:00 PM	#4
68lowburb Registered User Join Date: Sep 2006 Location: prairieville, louisiana Posts: 883	Re: WTB 72 SBC 1/2 ton Ram horn manifolds hey ,checked mine today on a 71 350 came out of a pickup both angle towards the back,if its what you need 75 plus shipping ? let me know if you need pic can get it tomorow thanks jimmy

03-17-2010, 08:20 PM	#6
68lowburb Registered User Join Date: Sep 2006 Location: prairieville, louisiana Posts: 883	Re: WTB 72 SBC 1/2 ton Ram horn manifolds no cracks that i saw and studs looked good drivers side has heat sheild for riser to, will get you pics tommorow be about the same time thanks jimmy

03-18-2010, 09:57 PM	#7
68lowburb Registered User Join Date: Sep 2006 Location: prairieville, louisiana Posts: 883	Re: WTB 72 SBC 1/2 ton Ram horn manifolds here are the pics ,if interested i could media blast and paint for extra 25 thanks jimmy Attached Images

03-18-2010, 10:18 PM	#8
WIDESIDE72 Senior Member Join Date: Aug 2008 Location: Cedar Park, Texas Posts: 7,500	Re: WTB 72 SBC 1/2 ton Ram horn manifolds They look good. How well does paint hold up on these? I usually run them w/ out paint... I think I saw that Eastwood or someone similar had some sort of coating for cast rion manifolds that could be rubbed on the keep them from rusting and looking so nasty...How much to just media blast and ship to Leander TX 78641?

03-18-2010, 10:19 PM	#9
WIDESIDE72 Senior Member Join Date: Aug 2008 Location: Cedar Park, Texas Posts: 7,500	Re: WTB 72 SBC 1/2 ton Ram horn manifolds How much for the stock valve covers, if they are for sale?

03-18-2010, 10:21 PM	#10
68lowburb Registered User Join Date: Sep 2006 Location: prairieville, louisiana Posts: 883	Re: WTB 72 SBC 1/2 ton Ram horn manifolds Will do 120 plus shipping for everything and i will blast manifolds and covers and paint the covers chevy orange let me know thanks jimmy

03-19-2010, 06:40 PM	#11
WIDESIDE72 Senior Member Join Date: Aug 2008 Location: Cedar Park, Texas Posts: 7,500	Re: WTB 72 SBC 1/2 ton Ram horn manifolds I don't need the VC's blasted. How much for the manifolds blasted, VC's as is, all shipped to Leander TX 78641? Steve

03-19-2010, 07:38 PM	#12
68lowburb Registered User Join Date: Sep 2006 Location: prairieville, louisiana Posts: 883	Re: WTB 72 SBC 1/2 ton Ram horn manifolds steve will try and get them boxed tommorow and get shipping quote and give you a total thanks jimmy

03-19-2010, 09:25 PM	#14
CSGAS optomistic ah-so Join Date: Mar 2009 Location: Charlotte, NC Posts: 544	Re: WTB 72 SBC 1/2 ton Ram horn manifolds My dad has used the Eastwood stuff on a few manifolds, it needs recoating every few years but it looks good and does prevent rust, does not flake off or have any silly behavior. Applying it with a disposable foam brush seems to work best and you don't have to feel bad about not being able to reuse a brush for anything else. I'm not sure if protocol allows me to ask, but if neither of you wants those spark plug shields I'll take at least one of the "humped" ones (with the hole for the water temp sensor). the resto places make a set of 4 flat one but not those and it looks like you have two on that engine, sounds like Jimmy you're trying to get rid of the whole thing...if this line of conversation should be moved to a whole new thread I'll be happy to comply. __________________ Rubbing is Racin' Ribbing is Bench Racin' 1970 C-10 lwb Fleetside. Originally 350 2-bbl 3-on-the-tree, m/b, m/w, m/s no a/c. Currently running on a '76 Camaro 305.

03-19-2010, 09:28 PM	#15
68lowburb Registered User Join Date: Sep 2006 Location: prairieville, louisiana Posts: 883	Re: WTB 72 SBC 1/2 ton Ram horn manifolds cs gas if you want them there are yours for the shipping thanks jimmy

03-20-2010, 10:14 AM	#16
WIDESIDE72 Senior Member Join Date: Aug 2008 Location: Cedar Park, Texas Posts: 7,500	Re: WTB 72 SBC 1/2 ton Ram horn manifolds 68lowburb, Does the engine you are pulling the manifolds off of happen to have a timing pointer that is compatible with a 6-3/4" diameter balancer?

03-21-2010, 12:19 AM	#17
68lowburb Registered User Join Date: Sep 2006 Location: prairieville, louisiana Posts: 883	Re: WTB 72 SBC 1/2 ton Ram horn manifolds dont know will check sunday and see ,manifolds and covers 125 shipped as is or 135 for manifolds blasted and shipped thanks jimmy

03-21-2010, 07:46 AM	#18
GMC AMI Registered User Join Date: Apr 2004 Location: The Other Maine! Posts: 2,236	Re: WTB 72 SBC 1/2 ton Ram horn manifolds Here is what I have. PICS did not come out the best because of the sunlight. Very nice set. Replaced one stud that was missing. No cracks or damage of any kind. Attached Images __________________ 1968 Chevy 4x4 307 4 speed



Register or Log In To remove these advertisements.

03-24-2010, 10:23 PM	#19
WIDESIDE72 Senior Member Join Date: Aug 2008 Location: Cedar Park, Texas Posts: 7,500	Re: WTB 72 SBC 1/2 ton Ram horn manifolds GMC AMI I will pass. I have a trade pending with 68l0wburb.

Register or Log In To remove these advertisements.