Boss 338 Wheels **GROUP BUY** - The 1947 - Present Chevrolet & GMC Truck Message Board Network

brossow · 03-25-2010, 10:18 PM

Quote:

Originally Posted by DrtyJack75

Ok, Im a little slow right now...

The 67 rear end is narrower, right?

So if your using a 1" spacer, then Ill beed a BIGGER spacer because the wheels will be even closer (touching) to the inside of the wheel well??

Yes, the '67 rear is narrower by 3/4" on each side. A 1.5" spacer should be adequate, I'd think. Here's one example on eBay for $65 shipped: http://tinyurl.com/ygr6sqj.

DrtyJack75 · 03-25-2010, 10:34 PM

Quote:

Originally Posted by brossow

yes, the '67 rear is narrower by 3/4" on each side. A 1.5" spacer should be adequate, i'd think. Here's one example on ebay for $65 shipped: http://tinyurl.com/ygr6sqj.

thanks!!

DrtyJack75 · 03-25-2010, 10:48 PM

Here's my truck with a 4/6 ECE drop.

these tires are 235-75-15 overall diameter is 28.87"

your tires are 29.03" and 29.74" so this will give you an idea of how it will fill the wheel wells if you do a drop.

Leviticus · 03-25-2010, 11:00 PM

Quote:

Originally Posted by DrtyJack75

Here's my truck with a 4/6 ECE drop.

these tires are 235-75-15 overall diameter is 28.87"

your tires are 29.03" and 29.74" so this will give you an idea of how it will fill the wheel wells if you do a drop.

Your truck is going to look

with the 338's. Thanks for the pic!

Slow Build · 03-26-2010, 03:13 AM

Why was this only posted in the 67-72 forum? There are board members that might be interested in these wheels that have different year trucks.

*Sublvr72* · 03-26-2010, 05:06 AM

Quote:

Originally Posted by Slow Build

Why was this only posted in the 67-72 forum? There are board members that might be interested in these wheels that have different year trucks.

too hard to monitor in multiple areas. Feel free to repost a link back to here for the second round.

03-25-2010, 10:48 PM	#3
DrtyJack75 Registered User Join Date: Feb 2008 Location: West Sacramento, CA Posts: 417	Re: Boss 338 Wheels GROUP BUY Here's my truck with a 4/6 ECE drop. these tires are 235-75-15 overall diameter is 28.87" your tires are 29.03" and 29.74" so this will give you an idea of how it will fill the wheel wells if you do a drop.

03-26-2010, 03:13 AM	#5
Slow Build Registered User Join Date: Sep 2009 Location: California Delta Posts: 2,163	Re: Boss 338 Wheels GROUP BUY Why was this only posted in the 67-72 forum? There are board members that might be interested in these wheels that have different year trucks. __________________ Name: Rich Current Ride: 1964 C-10 Short Fleetside Daily Driver: 2005 GMC crew cab short fleetside /2001 Chevy Tahoe Past GM Trucks: 1959 GMC short stepside 1968 GMC short stepside-4x4 1973 Chevy short stepside 1989 Chevy short fleetside-reg cab 1993 Chevy short fleetside-Xcab 2002 Chevy short fleetside-Xcab Save the dinosaurs, use synthetic oil.



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.