![]() |
Register or Log In To remove these advertisements. |
|
|
![]() |
|
Thread Tools | Display Modes |
|
![]() |
#1 |
Registered User
Join Date: Jul 2009
Location: West Jefferson, OH
Posts: 999
|
Re: fuel tank selector Switch schematic
|
![]() |
![]() |
![]() |
#2 |
Registered User
Join Date: Nov 2009
Location: Haines City FL
Posts: 461
|
Re: fuel tank selector Switch schematic
Thanks for all your responses
I do have 4 wires, but the colors are brown brown/white Black Grey I know where the black and grey go , but not the brown's |
![]() |
![]() |
![]() |
#3 | |
Registered User
Join Date: Nov 2009
Location: Haines City FL
Posts: 461
|
Re: fuel tank selector Switch schematic
Quote:
Thanks helps me out some, but the colors are a bit confusing |
|
![]() |
![]() |
![]() |
#4 |
Registered User
Join Date: Nov 2009
Location: Haines City FL
Posts: 461
|
Re: fuel tank selector Switch schematic
Ok put on the new switch, and seem to be working.... The truck rruns fine on the passenger side. I turn off the truck and switch the switch to the LH and put the key foward and does not start. I here the fuel pump on and is on while cranking. i have had someone switch the switch while i was underneath and the sides switch to thew respective sides whith the switch
I have replaced the switch and the tank selector valve because i had nothing before. the gauge moves now when i put the ignition foward and flip the switch i thought i was out of gas amd faulty guage, but put fuel in the drivers side and the guage moved. Any suggestions? I think it might be the pump on the left side, althouh i hear it running any way to check it out... |
![]() |
![]() |
![]() |
#5 | |
Registered User
Join Date: Feb 2011
Location: 4610 Penny Ave Santa Ana, CA
Posts: 4
|
Re: fuel tank selector Switch schematic
Quote:
![]() ![]() Last edited by hallpearl; 02-10-2011 at 05:23 AM. |
|
![]() |
![]() |
![]() |
Bookmarks |
|
|