Porterbuilt- Dropmember group buy thread* - Page 3 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

NPilot1975 · 04-02-2009, 05:22 PM

Nathan,

Just wanted to see if you got moved into your new shop and have had a chance to start on our crossmembers. I am no where close to needing it yet, but thought I would check on progress. Thanx

PBFAB.COM · 04-02-2009, 05:45 PM

Quote:

Originally Posted by NPilot1975

Nathan,

Just wanted to see if you got moved into your new shop and have had a chance to start on our crossmembers. I am no where close to needing it yet, but thought I would check on progress. Thanx

We are finally all moved in, and what I would call "close" to being back on track! Moving is never fun.

Your DM ships next week!

NPilot1975 · 04-02-2009, 06:37 PM

I have moved every 3 yrs for the past 11 yrs. I completely know what you are talking about. You will have to post some pix of the new place when you get settled in.

p8ntballer1911 · 04-02-2009, 08:26 PM

I am also in the process of moving into a bigger shop. And it is crazy! You never know how much stuff you have until its all out.

PBFAB.COM · 04-03-2009, 01:05 AM

Quote:

Originally Posted by p8ntballer1911

I am also in the process of moving into a bigger shop. And it is crazy! You never know how much stuff you have until its all out.

Here's the fun part... try taking all that stuff that you never knew you had, put it together with all the stuff you knew you had, and move it into a smaller shop! It took a lot longer than I expected!

NPilot1975 · 04-03-2009, 10:01 AM

That is too bad to hear, I thought you were moving into a BIGGER shop. I actually did the same thing in my last move went from a 30'x40' shop down to a 24'x17' single car garage. I still have a storage building full of stuff. I was wrong with my moves, I have actually moved 7 times in the last 10 years.

PBFAB.COM · 04-03-2009, 10:29 AM

Quote:

Originally Posted by NPilot1975

That is too bad to hear, I thought you were moving into a BIGGER shop. I actually did the same thing in my last move went from a 30'x40' shop down to a 24'x17' single car garage. I still have a storage building full of stuff. I was wrong with my moves, I have actually moved 7 times in the last 10 years.

Definiely not a BAD thing for me! We were paying quite a bit for a lot more space than we needed! The move was to help put myself in a position to purchase my own building in the next few years!

abadsvt · 04-03-2009, 11:50 AM

Quote:

Originally Posted by porterbuilt

Definiely not a BAD thing for me! We were paying quite a bit for a lot more space than we needed! The move was to help put myself in a position to purchase my own building in the next few years!

Hey Nate! Sounds like a smart move. How many sqft did you loose? I know you are a while out from making that move but when the time does comes and you decide to buy a piece of a property to put up a new metal building instead of buying a pre-exhisting building let me know. Metal building erection is one of our specialties and i am sure I could make you a good deal. Anyways just giving you options.

Josh

PBFAB.COM · 04-03-2009, 12:17 PM

Quote:

Originally Posted by abadsvt

Hey Nate! Sounds like a smart move. How many sqft did you loose? I know you are a while out from making that move but when the time does comes and you decide to buy a piece of a property to put up a new metal building instead of buying a pre-exhisting building let me know. Metal building erection is one of our specialties and i am sure I could make you a good deal. Anyways just giving you options.

Josh

We lost just over 2300 square feet total, but only about 1500 square feet of actual workspace. Our current shop is much smaller, but will be better tailored to our plans to focus more on product.

So.... you specialize in erections?

I will definitely be building a building... not buying a preexisting one.

LowRodder · 04-03-2009, 12:33 PM

pm sent

PBFAB.COM · 04-03-2009, 02:01 PM

Quote:

Originally Posted by LowRodder

pm sent

PM sent back!

abadsvt · 04-03-2009, 02:24 PM

Quote:

Originally Posted by porterbuilt

We lost just over 2300 square feet total, but only about 1500 square feet of actual workspace. Our current shop is much smaller, but will be better tailored to our plans to focus more on product.

So.... you specialize in erections?

I will definitely be building a building... not buying a preexisting one.

I guess i do

I should put that on a business card and see how much work i end up getting

Josh

mtolli46 · 04-07-2009, 10:31 PM

I defiantly want a dropmember from you, how much more would it be with your upper and lower a-arms?

altereddezignz · 03-28-2010, 08:57 PM

just c n if there are a group buy going on before the 31st,. im in if so i need a dropmember for my 86 c10
Thanks

PBFAB.COM · 03-29-2010, 01:10 AM

Quote:

Originally Posted by altereddezignz

just c n if there are a group buy going on before the 31st,. im in if so i need a dropmember for my 86 c10
Thanks

We are currently running a $999 special until the 31st of March. This is the same price one would get with a group buy purchase.

04-02-2009, 05:22 PM	#51
NPilot1975 Senior Member Join Date: Aug 2002 Location: Plymouth, MA Posts: 891	Re: Porterbuilt- Dropmember group buy thread (closed)* Nathan, Just wanted to see if you got moved into your new shop and have had a chance to start on our crossmembers. I am no where close to needing it yet, but thought I would check on progress. Thanx __________________ 1972 Blazer body...need to get a thread started for the rest of the story

04-02-2009, 06:37 PM	#53
NPilot1975 Senior Member Join Date: Aug 2002 Location: Plymouth, MA Posts: 891	Re: Porterbuilt- Dropmember group buy thread (closed)* I have moved every 3 yrs for the past 11 yrs. I completely know what you are talking about. You will have to post some pix of the new place when you get settled in. __________________ 1972 Blazer body...need to get a thread started for the rest of the story

04-02-2009, 08:26 PM	#54
p8ntballer1911 Bodydropped71 Join Date: Jun 2008 Location: Conroe Texas Posts: 264	Re: Porterbuilt- Dropmember group buy thread (closed)* I am also in the process of moving into a bigger shop. And it is crazy! You never know how much stuff you have until its all out.

04-03-2009, 10:01 AM	#56
NPilot1975 Senior Member Join Date: Aug 2002 Location: Plymouth, MA Posts: 891	Re: Porterbuilt- Dropmember group buy thread (closed)* That is too bad to hear, I thought you were moving into a BIGGER shop. I actually did the same thing in my last move went from a 30'x40' shop down to a 24'x17' single car garage. I still have a storage building full of stuff. I was wrong with my moves, I have actually moved 7 times in the last 10 years. __________________ 1972 Blazer body...need to get a thread started for the rest of the story

04-03-2009, 12:33 PM	#60
LowRodder Registered User Join Date: Sep 2006 Location: Fort Worth Tx Posts: 77	Re: Porterbuilt- Dropmember group buy thread (closed)* pm sent Last edited by LowRodder; 04-03-2009 at 12:40 PM.

04-07-2009, 10:31 PM	#63
mtolli46 Registered User Join Date: Jan 2009 Location: Desert Hot Springs CA Posts: 40	Re: Porterbuilt- Dropmember group buy thread* I defiantly want a dropmember from you, how much more would it be with your upper and lower a-arms?

03-28-2010, 08:57 PM	#64
altereddezignz Registered User Join Date: Feb 2010 Location: jonesboro arkansas Posts: 104	Re: Porterbuilt- Dropmember group buy thread* just c n if there are a group buy going on before the 31st,. im in if so i need a dropmember for my 86 c10 Thanks



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.