CA 69 Chevy C-10 Panel/Suburban Bucket Seats - The 1947 - Present Chevrolet & GMC Truck Message Board Network

*67/72junkie* · 03-30-2010, 11:58 PM

If you can take pics of seats upside down so I can see mounts and measure from center to center on the front to rear bolt holes I can let you know.I have several sets of cst style buckets with blazer mounts just no utility buckets.From the pics you have they look to have the correct driver side slider and passenger side flip forward just sitting on opposite sides in the pics.I just measured a set of 72 cst bucket blazer mounts driver side and the bolt holes are 12 7/8" from center to center front to rear.hope this helps.

03-30-2010, 11:58 PM	#18
67/72junkie Account Suspended Join Date: Oct 2002 Location: NC Posts: 1,129	Re: 69 Chevy C-10 Panel/Suburban Bucket Seats If you can take pics of seats upside down so I can see mounts and measure from center to center on the front to rear bolt holes I can let you know.I have several sets of cst style buckets with blazer mounts just no utility buckets.From the pics you have they look to have the correct driver side slider and passenger side flip forward just sitting on opposite sides in the pics.I just measured a set of 72 cst bucket blazer mounts driver side and the bolt holes are 12 7/8" from center to center front to rear.hope this helps. Last edited by 67/72junkie; 03-31-2010 at 12:04 AM.



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.