McGaughy Big Brake kit - Page 2 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

SCOTI · 04-01-2010, 10:40 PM

Quote:

Originally Posted by 87chevy.com

do you have any pictures? and the 13.4 rotors are off of a c6? what did you do for a hub?

Answered above....

Quote:

I have some 13.4" rotors, dual piston PBR calipers, & KORE3's billet hub (both w/car & truck pattern).

SCOTI · 04-01-2010, 10:42 PM

A few more . . ....

c10seconds · 04-02-2010, 04:11 AM

Quote:

Originally Posted by SCOTI

A few more . . ....

Is the hub meant for the HD (1.25)spindles? And does it come pre-drilled for both lug pattern?

aggie91 · 04-02-2010, 08:30 AM

Scoti - That set up looks good. I assume that is a 20" Coy wheel in the pictures. Are the holes that the bracket bolts to the original holes in the spindle?

Quote:

Originally Posted by c10seconds

Is the hub meant for the HD (1.25)spindles? And does it come pre-drilled for both lug pattern?

When I called they have a hub for both the HD and LD brakes. The HD hub is not on the web site yet, but the one for the LD hub is the same hub as the one for the GM Tall Spindle HD for the Impalla SS.

aggie91 · 04-02-2010, 08:37 AM

Quote:

Originally Posted by 87chevy.com

do you have any pictures? and the 13.4 rotors are off of a c6? what did you do for a hub?

The rotors are the 340 mm C6 Z51 Front Rotors. Looks like they have added the 5 on 5 pattern and opened up the center hub hole.

SCOTI · 04-02-2010, 12:34 PM

Quote:

Originally Posted by c10seconds

Is the hub meant for the HD (1.25)spindles? And does it come pre-drilled for both lug pattern?

Yes.

Quote:

Originally Posted by aggie91

I assume that is a 20" Coy wheel in the pictures. Are the holes that the bracket bolts to the original holes in the spindle?

Yes, a 20x8.5" Coy C5 & yes those are the OE splash shield holes drilled out & tapped.

Quote:

Originally Posted by aggie91

The rotors are the 340 mm C6 Z51 Front Rotors. Looks like they have added the 5 on 5 pattern and opened up the center hub hole.

Correct again. The rotors are aftermarket (DBA) & not just GM/OE units.

aggie91 · 04-02-2010, 10:20 PM

I looked a little more on the Kore3's site and now I am REALLY interested in doing this mod to the front of my '98 daily driver. I will most likely hold off on doing this to my 65 for a while. I am going to use 15" ralley wheels for now.

Looks like I have to save my lunch money...

87chevy.com · 04-03-2010, 06:02 PM

I modified a stock spindle like shown above and I'm going to cut the rotor portion off of the stock front brake rotor and turn it into a hub.. I'm going to try and put dodge front brakes on this spindle. The front rotor of the dodge has the same register as the fronts 3.08... im sure I can get it to work, but for 50 bucks for a rotor/caliper.. its worth a try. If sucessfull it will match the rears, plus I can grab the master and prop valve and call it a day.. probally wont be that simple but.. all else fails, just grab the hub from Tobin and a set of rotors.

smashingchuck · 04-03-2010, 07:21 PM

Scoti that is a really nice looking kit. What is the application on the caliper? Wondering if Wilwood makes a replacement...

87chevy.com · 04-03-2010, 07:37 PM

usually kore3 sells either regular corvette or zo6 calipers.

aggie91 · 04-05-2010, 09:19 AM

Quote:

Originally Posted by smashingchuck

Scoti that is a really nice looking kit. What is the application on the caliper? Wondering if Wilwood makes a replacement...

It is a Corvette front caliper with Kore3's logo machined into it. Look on Kore3's web site, I think that they have other Vette calipers and colors also.

04-01-2010, 10:42 PM	#27
SCOTI Registered User Join Date: Apr 2001 Location: DALLAS,TX Posts: 22,071	Re: McGaughy Big Brake kit A few more . . .... Attached Images __________________ 67SWB-B.B.RetroRod 64SWB-Recycle 89CCDually-Driver/Tow Truck 99CCSWB Driver All Fleetsides @rattlecankustoms in IG Building a small, high rpm engine with the perfect bore, stroke and rod ratio is very impressive. It's like a highly skilled Morrocan sword fighter with a Damascus Steel Scimitar..... *Cubic inches is like Indiana Jones with a cheap pistol.*

04-02-2010, 10:20 PM	#32
aggie91 I'm just glad to be here! Join Date: Jan 2008 Location: Longview, TX Posts: 4,788	Re: McGaughy Big Brake kit I looked a little more on the Kore3's site and now I am REALLY interested in doing this mod to the front of my '98 daily driver. I will most likely hold off on doing this to my 65 for a while. I am going to use 15" ralley wheels for now. Looks like I have to save my lunch money... __________________ Karl 1965 Chevy Stepside(Grandpa's Old Blue) and (July 2015 Shop Build!)(2020, the Saga Continues) http://67-72chevytrucks.com/vboard/s...d.php?t=372424 The LST Challenge: http://67-72chevytrucks.com/vboard/s...=1#post7812257 Korbin's 1st Square: "Sunburn" http://67-72chevytrucks.com/vboard/s...d.php?t=418618 1985 GMC Sierra: "White Trash", Korbin's 2nd now... http://67-72chevytrucks.com/vboard/s...d.php?t=632305 Henry - 1984 Chevrolet, Owen's 1st Square Last edited by aggie91; 04-05-2010 at 09:17 AM.

04-03-2010, 06:02 PM	#33
87chevy.com BMW & ASE Master Certified Join Date: Feb 2004 Location: Houston, Texas Posts: 1,266	Re: McGaughy Big Brake kit I modified a stock spindle like shown above and I'm going to cut the rotor portion off of the stock front brake rotor and turn it into a hub.. I'm going to try and put dodge front brakes on this spindle. The front rotor of the dodge has the same register as the fronts 3.08... im sure I can get it to work, but for 50 bucks for a rotor/caliper.. its worth a try. If sucessfull it will match the rears, plus I can grab the master and prop valve and call it a day.. probally wont be that simple but.. all else fails, just grab the hub from Tobin and a set of rotors. __________________ 1987 Silverado - L83 5.3 w/ 6L80e ,A/C,P/W,P/L,TILT, HID projectors, Wilwood C-10 Pro Spindles w/ 2018 silverado front brakes & C-5 Corvette Rear Disc Brakes 1999 BMW 528i - 5.7 LS1 w/ 4l60e, Ford 8.8 IRS w31 spline posi & FX-r projector retrofit New project: 2006 BMW x5 6cyl AWD to L83 6l80e 4wd to 2WD / RWD A poor man buy's it twice finally got my domain name back, 87chevy.com.... site rework in progress

04-03-2010, 07:21 PM	#34
smashingchuck It'd be alot cooler if you did Join Date: May 2003 Location: Three Rivers, MI Posts: 2,345	Re: McGaughy Big Brake kit Scoti that is a really nice looking kit. What is the application on the caliper? Wondering if Wilwood makes a replacement... __________________ 78 Build Thread 4Runner Build

04-03-2010, 07:37 PM	#35
87chevy.com BMW & ASE Master Certified Join Date: Feb 2004 Location: Houston, Texas Posts: 1,266	Re: McGaughy Big Brake kit usually kore3 sells either regular corvette or zo6 calipers. __________________ 1987 Silverado - L83 5.3 w/ 6L80e ,A/C,P/W,P/L,TILT, HID projectors, Wilwood C-10 Pro Spindles w/ 2018 silverado front brakes & C-5 Corvette Rear Disc Brakes 1999 BMW 528i - 5.7 LS1 w/ 4l60e, Ford 8.8 IRS w31 spline posi & FX-r projector retrofit New project: 2006 BMW x5 6cyl AWD to L83 6l80e 4wd to 2WD / RWD A poor man buy's it twice finally got my domain name back, 87chevy.com.... site rework in progress



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.