What do you think this is worth 53 panel? - The 1947 - Present Chevrolet & GMC Truck Message Board Network

ozzie50 · 04-05-2010, 02:01 AM

I found a 1953 panel 350/350, manual rack steering, camaro rearend, decent paint and pretty solid body (so says the owner). I have yet to see it and was wondering what this could like it would be worth. I know there are a lot of variables without seeing it. But what would be a good price on a pretty good panel. Looking just for a ballpark figure.

Also, when i go look at it what should be some of the problem areas on the body I should look for? I have a 50 gmc truck but was wondering if panels had any problem areas to look for.

99 to Life · 04-05-2010, 08:31 AM

Variables is the issue. It is so hard to say. I mean it could be worth a lot more than they would sell it for. You just never know. Don't make the offer for it, unless you are willing and have what you offer. I always make them put the ball park number out there, if one isn't established. But for instance, around my area a guy was selling a pretty decent original panel for 1200 bucks. I also have seen some not complete for around 3 grand. But I have also seen one in PA for 300 bucks. But it sounds like this has been through the mods most of us have been doing. The vehicle alone if in good shape, just for the metal and title would be an easy 1500 if not a bit more. It depends on how nice that 350 is. There is soooo much you can do with just an engine with performance and dress up, that alone might be worth 1500, but some people will sell a running 350 for around 500 bucks. It just all depends. I would check out pics and see how desperate they are to sell it. Heck I just got a 400 dollar air compressor for about 100 bucks. The deals are out there. With these trucks it just seems like what is it worth to YOU. But lastly the panels are definitely more than the trucks that is for sure.

ozzie50 · 04-05-2010, 10:01 AM

He is asking 3800. Which if the body is as good as he says I think it maybe worth it. Clear title he has no money invested in it he got it in a trade.

Dan Bowles · 04-05-2010, 10:16 AM

Variables are going to be the back doors, the rear corners, and the area between the doors and fenders. These are the most injury/rot prone. Also, don't hesitate to get up and look at the roof. I've got one someone put in a garage that wasn't tall enough for it. The rear sat higher than the front. The front fit...

Wheelright has patch panels for the sides and rear corners. Doors aren't as easy to come by. If it has clam shell doors, it is worth more but this isn't common on panels (I doubt they were original if they have them).

Front sheet metal is the same as all the rest. Floors and cowls are prone to rot.

Dan Bowles · 04-05-2010, 10:15 PM

Did you get pictures by chance? I'd love to see it.

apacheracing · 04-05-2010, 10:41 PM

Quote:

Originally Posted by ozzie50

I found a 1953 panel 350/350, manual rack steering, camaro rearend, decent paint and pretty solid body (so says the owner). I have yet to see it and was wondering what this could like it would be worth. I know there are a lot of variables without seeing it. But what would be a good price on a pretty good panel. Looking just for a ballpark figure.

Also, when i go look at it what should be some of the problem areas on the body I should look for? I have a 50 gmc truck but was wondering if panels had any problem areas to look for.

Is it white with black fenders???????

04-05-2010, 02:01 AM	#1
ozzie50 Registered User Join Date: Jul 2009 Location: tulsa Posts: 89	What do you think this is worth 53 panel? I found a 1953 panel 350/350, manual rack steering, camaro rearend, decent paint and pretty solid body (so says the owner). I have yet to see it and was wondering what this could like it would be worth. I know there are a lot of variables without seeing it. But what would be a good price on a pretty good panel. Looking just for a ballpark figure. Also, when i go look at it what should be some of the problem areas on the body I should look for? I have a 50 gmc truck but was wondering if panels had any problem areas to look for.

04-05-2010, 08:31 AM	#2
99 to Life Registered User Join Date: Jan 2010 Location: Titusville, PA Posts: 3,585	Re: What do you think this is worth 53 panel? Variables is the issue. It is so hard to say. I mean it could be worth a lot more than they would sell it for. You just never know. Don't make the offer for it, unless you are willing and have what you offer. I always make them put the ball park number out there, if one isn't established. But for instance, around my area a guy was selling a pretty decent original panel for 1200 bucks. I also have seen some not complete for around 3 grand. But I have also seen one in PA for 300 bucks. But it sounds like this has been through the mods most of us have been doing. The vehicle alone if in good shape, just for the metal and title would be an easy 1500 if not a bit more. It depends on how nice that 350 is. There is soooo much you can do with just an engine with performance and dress up, that alone might be worth 1500, but some people will sell a running 350 for around 500 bucks. It just all depends. I would check out pics and see how desperate they are to sell it. Heck I just got a 400 dollar air compressor for about 100 bucks. The deals are out there. With these trucks it just seems like what is it worth to YOU. But lastly the panels are definitely more than the trucks that is for sure. __________________ 51' 99toLife finished 2011,355 sbc,5speed, patina, redoing whole truck, inter, bags, etc http://67-72chevytrucks.com/vboard/s...d.php?t=382481 49Hardtimes s/10 susp- bagged, vortec sbc, 5 speed, patina, sold http://67-72chevytrucks.com/vboard/s...d.php?t=594874 VIDEOS https://youtu.be/E8zHhjgS_lA https://youtu.be/E8zHhjgS_lA Geronimo 54' LS engine, static drop IFS, Client build, just about done http://67-72chevytrucks.com/vboard/s...62#post7399162 52' 3100 Slowly in progress, will be painted two toned, have 235 with a t-5, lowered OG frame Other projects, 49' farmuse 3100, killer Patina, will be slammed, LS engine, full done interior up next! www.coffeeandcustoms.com

04-05-2010, 10:01 AM	#3
ozzie50 Registered User Join Date: Jul 2009 Location: tulsa Posts: 89	Re: What do you think this is worth 53 panel? He is asking 3800. Which if the body is as good as he says I think it maybe worth it. Clear title he has no money invested in it he got it in a trade.

04-05-2010, 10:16 AM	#4
Dan Bowles AD Addict Join Date: Oct 2009 Location: Blissfield, MI Posts: 822	Re: What do you think this is worth 53 panel? Variables are going to be the back doors, the rear corners, and the area between the doors and fenders. These are the most injury/rot prone. Also, don't hesitate to get up and look at the roof. I've got one someone put in a garage that wasn't tall enough for it. The rear sat higher than the front. The front fit... Wheelright has patch panels for the sides and rear corners. Doors aren't as easy to come by. If it has clam shell doors, it is worth more but this isn't common on panels (I doubt they were original if they have them). Front sheet metal is the same as all the rest. Floors and cowls are prone to rot.

04-05-2010, 10:15 PM	#5
Dan Bowles AD Addict Join Date: Oct 2009 Location: Blissfield, MI Posts: 822	Re: What do you think this is worth 53 panel? Did you get pictures by chance? I'd love to see it.



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.