350 upper rebuilt now very very loud engine knock - Page 2 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

cableguy0 · 03-16-2010, 06:38 PM

Ok. Thats not valvetrain. That would be a bottom end knock. rod or main. that engine is going to need rebuilt.

ryanbenn1207 · 03-17-2010, 12:01 AM

well tomorrow i get my gasket in, im gona go ahead drain oil flush with diesal, then im going to go ahead and drain the diesal and put new oil back in and filter if problem persist ill open the pan, check the oil pickup and pump if it dosnt work then ill rebuild.

ryanbenn1207 · 04-08-2010, 05:39 PM

well after i adjusted the valves the knock went to a normal knock without any oil, i think i have anrrowed it dont to my camshaft bearigns which we did not replace, i tryed to drop the oil pan only to realize the engine would have to be pulled in order to do this so that was a surprise im replacing the gasket and going to prolly get it ready for a tear down and by some camshaft bearings and a nice 70 dollar tool along with those lol

03-16-2010, 06:38 PM	#26
cableguy0 Senior Member Join Date: Apr 2000 Location: Delta,Pa Posts: 14,950	Re: 350 upper rebuilt now very very loud engine knock Ok. Thats not valvetrain. That would be a bottom end knock. rod or main. that engine is going to need rebuilt. __________________ Owner of North Point Car Care in Dundalk Md. We specialize in custom exhaust on both modern and classic vehicles. We are a full service auto shop from classics to modern vehicles. Feel free to contact me with questions. I will give a 10% discount to any board member.

03-17-2010, 12:01 AM	#27
ryanbenn1207 Registered User Join Date: Jan 2010 Location: westcliffe colorado Posts: 65	Re: 350 upper rebuilt now very very loud engine knock well tomorrow i get my gasket in, im gona go ahead drain oil flush with diesal, then im going to go ahead and drain the diesal and put new oil back in and filter if problem persist ill open the pan, check the oil pickup and pump if it dosnt work then ill rebuild.

04-08-2010, 05:39 PM	#28
ryanbenn1207 Registered User Join Date: Jan 2010 Location: westcliffe colorado Posts: 65	Re: 350 upper rebuilt now very very loud engine knock well after i adjusted the valves the knock went to a normal knock without any oil, i think i have anrrowed it dont to my camshaft bearigns which we did not replace, i tryed to drop the oil pan only to realize the engine would have to be pulled in order to do this so that was a surprise im replacing the gasket and going to prolly get it ready for a tear down and by some camshaft bearings and a nice 70 dollar tool along with those lol



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.