Spedometer Cable Routing - The 1947 - Present Chevrolet & GMC Truck Message Board Network

Deryl · 04-08-2010, 08:56 PM

I'm finally going to put a speedometer cable in my 63, but I forgot where it goes through the firewall. There is a round hole to the lower right of the steering column looking from the drivers seat. Is that where it goes?

Big Fenders · 04-08-2010, 09:35 PM

Yes, that's where it goes. A grommet is made to snug in up too. One thing that I learned is to fasten the speedo cable to frame etc. to prevent it from wipping around which leads to trouble.
Bob

Deryl · 04-08-2010, 09:40 PM

Thanks Big Fenders. Good tip on fastening the cable too.

04-08-2010, 08:56 PM	#1
Deryl Registered User Join Date: Oct 2003 Location: Douglasville, Ga. Posts: 125	Spedometer Cable Routing I'm finally going to put a speedometer cable in my 63, but I forgot where it goes through the firewall. There is a round hole to the lower right of the steering column looking from the drivers seat. Is that where it goes? __________________ D's 63

04-08-2010, 09:35 PM	#2
Big Fenders Registered User Join Date: Mar 2008 Location: Tucson Arizona Posts: 264	Re: Spedometer Cable Routing Yes, that's where it goes. A grommet is made to snug in up too. One thing that I learned is to fasten the speedo cable to frame etc. to prevent it from wipping around which leads to trouble. Bob

04-08-2010, 09:40 PM	#3
Deryl Registered User Join Date: Oct 2003 Location: Douglasville, Ga. Posts: 125	Re: Spedometer Cable Routing Thanks Big Fenders. Good tip on fastening the cable too. __________________ D's 63



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.