looking for pics of fleetsides with bediner - The 1947 - Present Chevrolet & GMC Truck Message Board Network

Piece of Work · 04-13-2010, 07:47 PM

Specifically, where the spray liner ends and the paint begins. I'm looking for ideas on where to mask off.

haysonj · 04-13-2010, 07:55 PM

Quote:

Originally Posted by Piece of Work

Specifically, where the spray liner ends and the paint begins. I'm looking for ideas on where to mask off.

Heres mine its a linex liner and it comes about 3/4 of an inch down the outside.

Cole Trickle · 04-13-2010, 07:56 PM

I have been pondering the same thing because the paint in my bed is flaking.

I think I will tape the top edge of the bedsides so the liner stop at the top of the inner edge. I think the best thing to do on the front is to roll it all the way over the round ledge.

Tail gate I would go as high as needed to match the bedsides.

I will eventually be painting the truck and don't want to do a liner twice.

67chevy2wd · 04-13-2010, 08:03 PM

I plan on putting a steel floor in my 71 and getting it line x'd. I would like to go over the top of the bed rails but I know it is more expensive to go that route. I assume it is more expensive since the masking would take a little more time.

Piece of Work · 04-14-2010, 03:17 PM

haysonj

nice truck! thanks for the pictures.

04-13-2010, 07:47 PM	#1
Piece of Work Cultural Infidel Join Date: Jan 2007 Location: Clearwater, FL Posts: 668	looking for pics of fleetsides with bedliner Specifically, where the spray liner ends and the paint begins. I'm looking for ideas on where to mask off. __________________ posted via La-Z-Boy -Mark 1972 C-10 Fleetside 350/TH350 PS PB A/C Cab Sadly....Sold 1968 Short Fleet 350/TH400 PS PB Delivered by Fine69 Also sadly Sold! It may be that your whole purpose in life is simply to serve as a warning to others. A man is not complete until he is married -- then he is finished. Last edited by Piece of Work; 04-13-2010 at 09:42 PM. Reason: sp.

04-13-2010, 07:56 PM	#3
Cole Trickle C-10 Club Member Join Date: Mar 2010 Location: Corona,CA Posts: 1,001	Re: looking for pics of fleetsides with bediner I have been pondering the same thing because the paint in my bed is flaking. I think I will tape the top edge of the bedsides so the liner stop at the top of the inner edge. I think the best thing to do on the front is to roll it all the way over the round ledge. Tail gate I would go as high as needed to match the bedsides. I will eventually be painting the truck and don't want to do a liner twice.

04-13-2010, 08:03 PM	#4
67chevy2wd Registered User Join Date: Sep 2003 Location: New Salem, ND Posts: 1,558	Re: looking for pics of fleetsides with bediner I plan on putting a steel floor in my 71 and getting it line x'd. I would like to go over the top of the bed rails but I know it is more expensive to go that route. I assume it is more expensive since the masking would take a little more time. __________________ 07 Chevy classic LBZ Duramax (a few mods) '67 Chevy 1/2 ton 2wd (in pieces) '69 Chevy 1/2 ton 2wd (on hold) '71 GMC 3/4 ton 4x4 ‘71 GMC 1/2 ton 2wd suburban

04-14-2010, 03:17 PM	#5
Piece of Work Cultural Infidel Join Date: Jan 2007 Location: Clearwater, FL Posts: 668	Re: looking for pics of fleetsides with bediner haysonj nice truck! thanks for the pictures. __________________ posted via La-Z-Boy -Mark 1972 C-10 Fleetside 350/TH350 PS PB A/C Cab Sadly....Sold 1968 Short Fleet 350/TH400 PS PB Delivered by Fine69 Also sadly Sold! It may be that your whole purpose in life is simply to serve as a warning to others. A man is not complete until he is married -- then he is finished.



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.