Anybody know what size bolts - The 1947 - Present Chevrolet & GMC Truck Message Board Network

bw4sale · 04-17-2010, 03:06 PM

Long story short, I've moved twice since I took my front end out from under the truck. You know how it is when you move. Something always gets lost along the way. Anyway, I can't find the bolts to bolt my front crossmember to the frame again (kinda important). I'm just going to buy new ones. What size? I can't find anything around my garage that looks like it's the right size. Thanks.

cdowns · 04-17-2010, 04:01 PM

ever think of measuring the holes they go into? or did you loose them too??

bw4sale · 04-17-2010, 04:54 PM

You know everytime I ask a question on here I get some smart remark. You guys know a lot more about these truck than I do which is why I ask. Sometimes there's little details that I wouldn't have known. How do I know this wasn't the case with this questions. Thanks anyway. Maybe I'll stop asking questions.

**VetteVet** · 04-17-2010, 06:17 PM

I just looked at mine in my 67 and they are 1/2 x 13 about an inch long. Get grade 8 bolts and nuts. You may need as many as 14.

bw4sale · 04-17-2010, 07:01 PM

Thanks for the info. I remembered there being a lot of them.

*72lb4x4* · 04-17-2010, 07:35 PM

Quote:

Originally Posted by cdowns

ever think of measuring the holes they go into? or did you loose them too??

That's funny but you misspelled lose

04-17-2010, 03:06 PM	#1
bw4sale Registered User Join Date: Sep 2006 Location: Hendersonville, TN Posts: 1,528	Anybody know what size bolts Long story short, I've moved twice since I took my front end out from under the truck. You know how it is when you move. Something always gets lost along the way. Anyway, I can't find the bolts to bolt my front crossmember to the frame again (kinda important). I'm just going to buy new ones. What size? I can't find anything around my garage that looks like it's the right size. Thanks. __________________ BRENT -'68 Stepside Project -'98 Z71 Daily Driver -Enough extra parts to build another truck and a half

04-17-2010, 04:01 PM	#2
cdowns Senior Member Join Date: Jan 2003 Location: daytonabeach Posts: 22,956	Re: Anybody know what size bolts ever think of measuring the holes they go into? or did you loose them too?? __________________ 71c-10 350/2004r/4:11 lowered3/4 longbed/dead by hurricane MEANING OF DEATH::::: SOMEBODY ELSE GETS YOUR STUFF DONT BELIEVE EVERYTHING YOU THINK TAKE MY ADVISE;I DON'T USE IT ANYWAY Last edited by cdowns; 04-17-2010 at 04:05 PM.

04-17-2010, 04:54 PM	#3
bw4sale Registered User Join Date: Sep 2006 Location: Hendersonville, TN Posts: 1,528	Re: Anybody know what size bolts You know everytime I ask a question on here I get some smart remark. You guys know a lot more about these truck than I do which is why I ask. Sometimes there's little details that I wouldn't have known. How do I know this wasn't the case with this questions. Thanks anyway. Maybe I'll stop asking questions. __________________ BRENT -'68 Stepside Project -'98 Z71 Daily Driver -Enough extra parts to build another truck and a half

04-17-2010, 06:17 PM	#4
VetteVet Msgt USAF Ret Join Date: Jan 2005 Location: Kalamazoo, Michigan Posts: 8,718	Re: Anybody know what size bolts I just looked at mine in my 67 and they are 1/2 x 13 about an inch long. Get grade 8 bolts and nuts. You may need as many as 14. __________________ VetteVet metallic green 67 stepside 74 corvette convertible 1965 Harley sportster 1995 Harley wide glide Growing old is hell, but it beats the alternative.

04-17-2010, 07:01 PM	#5
bw4sale Registered User Join Date: Sep 2006 Location: Hendersonville, TN Posts: 1,528	Re: Anybody know what size bolts Thanks for the info. I remembered there being a lot of them. __________________ BRENT -'68 Stepside Project -'98 Z71 Daily Driver -Enough extra parts to build another truck and a half



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.