|
04-18-2010, 11:29 PM
|
#1 |
|
Registered User
 
Join Date: Dec 2008
Location: coalgate, oklahoma
Posts: 65
|
2000 silverado seats
i got a set of seats for my c10 like the ones in the pic...and i was wondering if anyone is using them also and what it took to make them fit? thanks
|
|
|
|
04-18-2010, 11:44 PM
|
#2 |
|
BMW & ASE Master Certified
Join Date: Feb 2004
Location: Houston, Texas
Posts: 1,266
|
Re: 2000 silverado seats
ive got a pair of similar seats from an 02 installed in my 87.. pretty much a custom fabricated seat frame and it fit perfectly.. lol. I basically bought some either 1.5 or 2" square tubing and laid it between the frame rails, then about 2" or so on the other side of the slider. a piece of 1.5 x 1/8 strap metal bridged the gap. that was the seat frame. bolted the bottom of the seat couchion to the new frame. Cut the seat back mounting tabs off of the original frame, and welded that to the new frame. No more recline feature in my truck. the seats rest aginst the window seal. its been that way for about 2 years now.
recap: custom frame was the ticket here.. clint
__________________
1987 Silverado - L83 5.3 w/ 6L80e ,A/C,P/W,P/L,TILT, HID projectors, Wilwood C-10 Pro Spindles w/ 2018 silverado front brakes & C-5 Corvette Rear Disc Brakes 1999 BMW 528i - 5.7 LS1 w/ 4l60e, Ford 8.8 IRS w31 spline posi & FX-r projector retrofit New project: 2006 BMW x5 6cyl AWD to L83 6l80e 4wd to 2WD / RWD A poor man buy's it twice finally got my domain name back, 87chevy.com.... site rework in progress |
|
|
|
 |
| Bookmarks |
|
|
Linear Mode
