Sway bar needed - The 1947 - Present Chevrolet & GMC Truck Message Board Network

GMC_Aaron · 05-16-2003, 01:14 AM

Hit up your local junk yard. you can pull a sway bar off 1967-1987 trucks that will fit yours. That's what I did. I got mine for $30 and it bolted right on. The brackets and bushings were in great shape too. Look out for the different thicknesses. You'll get a thicker bar from the 4wd's and the 3/4 tons. I pulled a 3/4" bar off a 1987 3/4 ton truck. This is absolutely the most inexpensive upgrade you can do to your truck. My truck corners so well now.

05-16-2003, 01:14 AM	#1
GMC_Aaron Registered User Join Date: Jul 2002 Location: Ventura, Ca. Posts: 87	Hit up your local junk yard. you can pull a sway bar off 1967-1987 trucks that will fit yours. That's what I did. I got mine for $30 and it bolted right on. The brackets and bushings were in great shape too. Look out for the different thicknesses. You'll get a thicker bar from the 4wd's and the 3/4 tons. I pulled a 3/4" bar off a 1987 3/4 ton truck. This is absolutely the most inexpensive upgrade you can do to your truck. My truck corners so well now. __________________ Aaron Ventura, Ca. 1972 GMC Super Custom SB350/TH400



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.