|
04-22-2010, 03:38 PM
|
#1 |
|
Registered User
Join Date: Jan 2009
Location: Kansas city
Posts: 756
|
flip kit.
I installed a flip kit on my 84 shortbed. when installing the flip kit I used the holes in the bracket that moves the axel back. I took my truck to the transmission shop and they said I will now have to have my drive shaft shortened is this correct?
__________________
***My 84 short bed build up***** http://67-72chevytrucks.com/vboard/s...68#post3481968 |
|
|
|
04-23-2010, 07:32 AM
|
#2 |
|
Registered User
 
Join Date: Apr 2005
Location: Medford, MA
Posts: 307
|
Re: flip kit.
The offset holes in the brackets move the axle back slightly. This is to counteract the geometry since you're moving it up a good 5" or so. The idea is that you won't have to shorten the driveshaft, but each setup is a little different depending on all the components used. Mine's really a patchwork of parts, but (so far) I didn't need to shorten the driveshaft.
Do you currently have a 1-piece or 2-piece driveshaft. Mine is a 2-piece, so that could be a difference. A good driveline shop can also help get all the angles right on the driveline with shims & stuff. That can make a world of difference in ride noise, ride feel, and in part life. |
|
|
|
|
04-25-2010, 12:56 PM
|
#3 |
|
Registered User
Join Date: Jan 2009
Location: Kansas city
Posts: 756
|
Re: flip kit.
I have a one piece driveshaft.
__________________
***My 84 short bed build up***** http://67-72chevytrucks.com/vboard/s...68#post3481968 |
|
|
|
 |
| Bookmarks |
|
|
Linear Mode
