New project

[hotrod 80]

Originally Posted by ripdog28

Nice, that little thing had to be a bit scary.

It would move around due to the short wheelbase , but i think it made me better as a driver . The truck really reacted to "jerk shift" and the break over point or point of no return ( when sideways) was quicker than a longer truck . Tire pressure was pretty critical as sidewall flex was important . The truck didn't have power steering so you either had to man handle it , chop it ONCE , or lift . Most of the time i would just make the shift and the loss of torque would bring it back in line even if i shifted early . It was a fun truck .

Got the new rim combo on the gray truck today and did a suspention lookover .

[hotrod 80]

I ended up listing the old body for my golf cart on Craigslist and the guy who is to replace the ends on my 9" shows up to buy it . Well a little horse trading and he is going to replace the ends on one housing and narrow another housing for the golf cart body .
Ordered the converter and dropped of the trans local for a rebuild . Here's a link to the converter . Hoping i didn't go to tight , but still street worthy .
http://transmission-specialties.com/...products_id=56
Also looking for opinions on this companies converters . Going parts hunting tommorow also .

[hotrod 80]

Sleeves are in and its ready for final hone . Also took a picture of the rods .

[hotrod 80]

My Machinist called me this afternoon and told me he just knocked the last piston in it . I usually assemble them ( motors) , but i think He's pretty proud of this one . This is one of the best pieces i have ever built . He said the deck was so far off his machine couldn't cut it . It was .018 in the front and .031 in the rear . It's zero now . Told me bring the rest of the stuff and we'll finish it up sometime this week . Matt called me this afternoon and told me Kenny Hubbard (another local all around good guy) is ready to build the trans , so i gotta haul that to him coming up . Been working on small stuff like pre plan for radiator . Researching the A/C parts needed to convert to 134A . Also got all the stuff together to build Rick's center section . Looking like i will have some time next week to relax and get busy . This type of work is relaxing and gives me a sense of acomplishment .