|
01-26-2008, 02:24 PM
|
#1 |
|
Registered User
Join Date: Feb 2007
Location: Cali Central Coast
Posts: 5,191
|
steering shaft seal -
Does anyone know where I can get one of these? No one seems to stock it. The one I have is a little questionable and I don't want to get everything back together and have it leak. It's the seal half way up the steering shaft. Also, the pin that is pressed in the shaft under this seal is out of center by around 1/16-1/8". The book says it's gotta be within .012" or the column will bind. Does anyone know how critical this is? I got this column in a junkyard off a '70 one- ton, so I don't know what it steered like.
__________________
'67 SWB Fleetside ZZ4/350/Tremec 5-speed/4link/Scott's IFS - and fun as heck! SOLD  Click here to support the board Philippians 4: 6-7 |
|
|
|
01-27-2008, 04:34 AM
|
#3 |
|
Registered User
Join Date: Feb 2005
Location: Carl Junction, Missouri
Posts: 2,061
|
Re: steering shaft seal -
i dont even have that, my shaft flops around in there. i want to know the same thing
|
|
|
|
|
01-27-2008, 07:52 AM
|
#4 |
|
'71 chevy s.bed/s.side
 
Join Date: Mar 2005
Location: Chesapeake, VA
Posts: 1,571
|
Re: steering shaft seal -
That joint is similar to a CV shaft joint. It is supposed to be packed full of grease. I'll check the parts manual, it could still be available, but I doubt it. It's worth a try. If not, I would say try to find a good used one.
__________________
STILL PLAYS WITH CARS...AND TRUCKS!! Parents! Be good to your kids...they get to choose your nursing home! 250 I-6 with a 3 speed Saginaw and Borg Warner Overdrive...She's got overdrive! |
|
|
|
|
01-27-2008, 10:54 PM
|
#6 |
|
'71 chevy s.bed/s.side
Join Date: Mar 2005
Location: Chesapeake, VA
Posts: 1,571
|
Re: steering shaft seal -
I checked the parts book and did not come up with that seal#. maybe someone else can shed some light on it. Some of the board vendors that sell used parts should have one of these. Good luck.
__________________
STILL PLAYS WITH CARS...AND TRUCKS!! Parents! Be good to your kids...they get to choose your nursing home! 250 I-6 with a 3 speed Saginaw and Borg Warner Overdrive...She's got overdrive! |
|
|
|
|
01-27-2008, 11:58 PM
|
#7 |
|
Registered User
Join Date: Feb 2007
Location: Cali Central Coast
Posts: 5,191
|
Re: steering shaft seal -
Thanks for checking for me.
__________________
'67 SWB Fleetside ZZ4/350/Tremec 5-speed/4link/Scott's IFS - and fun as heck! SOLD Click here to support the board Philippians 4: 6-7 |
|
|
|
|
01-28-2008, 12:04 AM
|
#8 |
|
Registered User
Join Date: Feb 2005
Location: Cameron, Ok.
Posts: 112
|
Re: steering shaft seal -
I have seen a few on Ebay
Do a search for intermediate shaft seal |
|
|
|
|
01-28-2008, 03:17 PM
|
#9 |
|
TILT COLUMN GURU
 
Join Date: Dec 2006
Location: FRESNO CA
Posts: 4,276
|
Re: steering shaft seal -
I buy this from The truck and car shop. Works real nice
|
|
|
|
|
05-03-2010, 11:02 PM
|
#10 |
|
Registered User
Join Date: Nov 2008
Location: Oklahoma City Oklahoma
Posts: 431
|
Re: steering shaft seal -
I know this is an old post but it's one of the only ones I can find about this seal. I looked on the truck and car shop website and can't seem to find the one shown. Does anyone know if can be bought from a local parts store?
__________________
My build thread - http://67-72chevytrucks.com/vboard/s...d.php?t=391224 |
|
|
|
|
05-04-2010, 09:50 AM
|
#11 | |
|
Registered User
Join Date: Dec 2009
Location: DFW, TX
Posts: 764
|
Re: steering shaft seal -
Quote:
1(800) CHEVY-47 |
|
|
|
|
 |
| Bookmarks |
|
|
Linear Mode
