Dana 60 Brake Shoes??? - The 1947 - Present Chevrolet & GMC Truck Message Board Network

HotRod929 · 05-15-2003, 09:38 PM

I have a 70 C20 Chevy with a Dana 60 rear and I was wondering what size brake shoes I need. I got some from LMC part #34-3522 and I think they wont work for a Dana 60. I called LMC but they had no clue as to weather they would fit or not. So I need some help for you guys. Please let me know. Thanks

HotRod

72LNGHRN · 05-16-2003, 12:01 PM

Ive got the Dana 60 in my truck and I purchased the brake shoes from the local Checkers store. Any parts house should stock and should know the difference between the dana shoes and the corporate rear end shoes.

**breeh** · 05-16-2003, 12:08 PM

I have had this problem many times with the "look it up in the computer" parts suppliers. Apparantly the "computer" only lists the Eaton rearend brakes. They then proceed to tell me that the rearend in my truck (Dana 60) must not be stock and become offended when I question there knowledge and understanding. Make the girl (apologies to you girls who really know what you are talking about!) or pimplied faced kid go find the old guy who still knows how to use the "book" and have him look it up. If memory serves me correct, the two possibilities are 2" and 2 1/2". I think that the Dana is the 2".

**JIMs70GMC** · 05-16-2003, 07:15 PM

Measured mine today: 12"x2.5".

HotRod929 · 05-16-2003, 10:32 PM

Thanks. Is that the measurement of the pad surface? The ones sitting in my room are 12" x 2.75". Would these work? Thanks

HotRod

**JIMs70GMC** · 05-17-2003, 08:59 PM

Pad itself. Installed mine this afternoon, works great.

HotRod929 · 05-17-2003, 09:30 PM

JIMs70GMC - where did you get your pads?

HotRod

**JIMs70GMC** · 05-18-2003, 01:53 AM

Advanced Auto. I had checked with Autozone but they told me they could not get the fronts so I didn't even ask about the rears.

No3Fan4Ever · 05-18-2003, 12:35 PM

American Classic Parts list a 12x2 shoe for a 1970 C20 WITH the Dana rearend
http://www.americanclassic.com/asp/d...ype=to&exyear=

05-15-2003, 09:38 PM	#1
HotRod929 Registered User Join Date: Mar 2002 Location: Bondurant, IA but in Worcester, MA for school Posts: 767	Dana 60 Brake Shoes??? I have a 70 C20 Chevy with a Dana 60 rear and I was wondering what size brake shoes I need. I got some from LMC part #34-3522 and I think they wont work for a Dana 60. I called LMC but they had no clue as to weather they would fit or not. So I need some help for you guys. Please let me know. Thanks HotRod __________________ 1970 Chevy C-20 350 V-8 Turbo 350 w/ shift kit Dana 60 w/ 4.10 gears AND Powr-Loc POSI New Additions: Summit Headers 135amp alternator Proform HEI Edelbrock 1406 600cfm carb Sunpro Tach Powr-Loc POSI Edelbrock Performer RPM Intake MSD 6A Ignition Box AIM: HotRod929 Visit My Site: http://1970chevy.netfirms.com/

05-16-2003, 12:01 PM	#2
72LNGHRN Registered User Join Date: Mar 2000 Location: Tucson AZ USA Posts: 241	Ive got the Dana 60 in my truck and I purchased the brake shoes from the local Checkers store. Any parts house should stock and should know the difference between the dana shoes and the corporate rear end shoes. __________________ 72LONGHORN 350 CI TURBO 400 A/C P/S P/B HEAVY DUTY SPRINGS ALL THE BELLS AND WHISTLES. TUCSON,AZ. 2005 4X4 DODGE RAM 1500 "HEMI"LARAMIE 1961 OLDS DYNAMIC 88 394 4BBL UNDER CONST.

05-16-2003, 07:15 PM	#4
JIMs70GMC user # 2756 Join Date: Jun 2001 Location: Chesapeake, Virginia Posts: 4,612	Measured mine today: 12"x2.5". __________________ 1970 K25, 8' stepside bed 350/465/205 44 up front, 60 in the rear 4.10s rolling on 33" Dunlop MTs 1986 K5, 350/465/208 Dana 60/14 bolt from a cucv 36" Super Swampers TSL/SX 1983 K20 w/ CUCV axles, 350/700R4/208 sitting on 37" Goodyears 1986 M1031 6.2 diesel, TH400/NP205 locker in the rear and a LS in the front, all stock for now..... 1986 K30, 350/400/205 dana 60 and 14 bolt. I kept the drivetrain. Body/bad and chassis are gone. 1981 K30, 350/465/205 dana 60 and dually 14 bolt. Has a G80, and a flat bed. Going to replace the flat bed. 1985 K20, 350/400/208 10 bolt and SF 14 bolt. I wonder where I can find some 1 tons. Hmmmmm

05-16-2003, 10:32 PM	#5
HotRod929 Registered User Join Date: Mar 2002 Location: Bondurant, IA but in Worcester, MA for school Posts: 767	Thanks. Is that the measurement of the pad surface? The ones sitting in my room are 12" x 2.75". Would these work? Thanks HotRod __________________ 1970 Chevy C-20 350 V-8 Turbo 350 w/ shift kit Dana 60 w/ 4.10 gears AND Powr-Loc POSI New Additions: Summit Headers 135amp alternator Proform HEI Edelbrock 1406 600cfm carb Sunpro Tach Powr-Loc POSI Edelbrock Performer RPM Intake MSD 6A Ignition Box AIM: HotRod929 Visit My Site: http://1970chevy.netfirms.com/

05-17-2003, 08:59 PM	#6
JIMs70GMC user # 2756 Join Date: Jun 2001 Location: Chesapeake, Virginia Posts: 4,612	Pad itself. Installed mine this afternoon, works great. __________________ 1970 K25, 8' stepside bed 350/465/205 44 up front, 60 in the rear 4.10s rolling on 33" Dunlop MTs 1986 K5, 350/465/208 Dana 60/14 bolt from a cucv 36" Super Swampers TSL/SX 1983 K20 w/ CUCV axles, 350/700R4/208 sitting on 37" Goodyears 1986 M1031 6.2 diesel, TH400/NP205 locker in the rear and a LS in the front, all stock for now..... 1986 K30, 350/400/205 dana 60 and 14 bolt. I kept the drivetrain. Body/bad and chassis are gone. 1981 K30, 350/465/205 dana 60 and dually 14 bolt. Has a G80, and a flat bed. Going to replace the flat bed. 1985 K20, 350/400/208 10 bolt and SF 14 bolt. I wonder where I can find some 1 tons. Hmmmmm

05-16-2003, 12:08 PM	#3
breeh Recovering 67-72 Addict Join Date: Oct 2000 Location: North Bend, WA Posts: 1,788	I have had this problem many times with the "look it up in the computer" parts suppliers. Apparantly the "computer" only lists the Eaton rearend brakes. They then proceed to tell me that the rearend in my truck (Dana 60) must not be stock and become offended when I question there knowledge and understanding. Make the girl (apologies to you girls who really know what you are talking about!) or pimplied faced kid go find the old guy who still knows how to use the "book" and have him look it up. If memory serves me correct, the two possibilities are 2" and 2 1/2". I think that the Dana is the 2". __________________ 68 Short Fleet 4x4; 427; BTO Level 3 700R4; NP205; Dana 60 front and rear; 4" lift with 35's; Disc brakes; AGR variable ratio steering; factory bucket seats; factory tach and tilt. "Friends call me cruzer cuz I like fast cars and fast women"

05-17-2003, 09:30 PM	#7
HotRod929 Registered User Join Date: Mar 2002 Location: Bondurant, IA but in Worcester, MA for school Posts: 767	JIMs70GMC - where did you get your pads? HotRod __________________ 1970 Chevy C-20 350 V-8 Turbo 350 w/ shift kit Dana 60 w/ 4.10 gears AND Powr-Loc POSI New Additions: Summit Headers 135amp alternator Proform HEI Edelbrock 1406 600cfm carb Sunpro Tach Powr-Loc POSI Edelbrock Performer RPM Intake MSD 6A Ignition Box AIM: HotRod929 Visit My Site: http://1970chevy.netfirms.com/

05-18-2003, 01:53 AM	#8
JIMs70GMC user # 2756 Join Date: Jun 2001 Location: Chesapeake, Virginia Posts: 4,612	Advanced Auto. I had checked with Autozone but they told me they could not get the fronts so I didn't even ask about the rears. __________________ 1970 K25, 8' stepside bed 350/465/205 44 up front, 60 in the rear 4.10s rolling on 33" Dunlop MTs 1986 K5, 350/465/208 Dana 60/14 bolt from a cucv 36" Super Swampers TSL/SX 1983 K20 w/ CUCV axles, 350/700R4/208 sitting on 37" Goodyears 1986 M1031 6.2 diesel, TH400/NP205 locker in the rear and a LS in the front, all stock for now..... 1986 K30, 350/400/205 dana 60 and 14 bolt. I kept the drivetrain. Body/bad and chassis are gone. 1981 K30, 350/465/205 dana 60 and dually 14 bolt. Has a G80, and a flat bed. Going to replace the flat bed. 1985 K20, 350/400/208 10 bolt and SF 14 bolt. I wonder where I can find some 1 tons. Hmmmmm

05-18-2003, 12:35 PM	#9
No3Fan4Ever Running on empty Join Date: Aug 2002 Location: Roanoke, Virginia Posts: 1,033	American Classic Parts list a 12x2 shoe for a 1970 C20 WITH the Dana rearend http://www.americanclassic.com/asp/d...ype=to&exyear= __________________ _____________________________________________ Tim We have two rules here at the Rock. Rule #1: No writing on the walls. Rule#2: Obey all rules 70 GMC Sierra Grande "Custom Camper" Longhorn 402 Big Block TH400 PS PB factory AC Posi; 94 Bronco XLT 302, auto;worn out daily driver



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.