Did I choose the wrong glass guy? - Page 2 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

msgross · 04-04-2010, 07:22 AM

I found an NOS seal, hopefully is works as well...

jugernot · 04-04-2010, 12:20 PM

Does anyone have any experience using soff seal window seals? Are they good, bad or okay?

DT1 · 04-05-2010, 09:04 AM

Quote:

Originally Posted by GMCPaul

We have many of our local glass companies contact us for our seals for the trucks because we stock only Precision brand seals for the 47-current trucks since we have them on hand, they ALL swear by the precision made made seals. We have several restoration shops in Indianapolis that regulary pick up our complete cab rubber kits because again they know they can rely on the fit of the preciision brand seals. So 1st thing I would ask any installer is what brand seal they plan on using before hiring them if they are supplying the seal and if you are INSIST on only Precision.
We currently have a cab rubber kit special on sale on our site made up of our lifetime warranty Precision weatherstriping for anyone else looking to avoid this sort of problem that includes all the cab weatherstriping from Precision and we include the option for those wishing to do away with glue-on door seals that you can upgrade to a Push-On version that requires no glue.
for those interested you can check it out at the following link
http://www.gmcpauls.com/SALE_SPECIALS.htm
GMCPaul

I wish I had known this two weeks ago!

crakarjax · 04-05-2010, 11:04 AM

I like soff-seal, haven't used them on my truck but they are (were) pretty high quality.

DT1 · 04-10-2010, 10:02 PM

Well,
The third glass guy just gave up.
I contacted GMC Paul for a Precision seal. Hopefully it will work.
This is really chaping my ass now! Including flat bedding the truck all over, I have now spent over $400 and still no windshield. I could understand it if the truck was rolled and the pillars were bent but that's not the case.

Leo70 · 04-12-2010, 01:35 AM

Quote:

Originally Posted by DT1

Well,
The third glass guy just gave up.
I contacted GMC Paul for a Precision seal. Hopefully it will work.
This is really chaping my ass now! Including flat bedding the truck all over, I have now spent over $400 and still no windshield. I could understand it if the truck was rolled and the pillars were bent but that's not the case.

I will call my guy tomorrow, he might drive up to where you are at, I will ask and let you know.

Leo

DT1 · 04-19-2010, 10:30 AM

I finally got the windshield in yesterday.
The moral of the story is; Use a Precision seal and you wont have to spend five weeks and $500.

FRENCHBLUE72 · 04-19-2010, 10:45 AM

Congrats on finally getting the glass in..

drewskiren · 05-08-2010, 02:27 PM

Quote:

Originally Posted by GMCPaul

We have many of our local glass companies contact us for our seals for the trucks because we stock only Precision brand seals for the 47-current trucks since we have them on hand, they ALL swear by the precision made made seals. We have several restoration shops in Indianapolis that regulary pick up our complete cab rubber kits because again they know they can rely on the fit of the preciision brand seals. So 1st thing I would ask any installer is what brand seal they plan on using before hiring them if they are supplying the seal and if you are INSIST on only Precision.
We currently have a cab rubber kit special on sale on our site made up of our lifetime warranty Precision weatherstriping for anyone else looking to avoid this sort of problem that includes all the cab weatherstriping from Precision and we include the option for those wishing to do away with glue-on door seals that you can upgrade to a Push-On version that requires no glue.
for those interested you can check it out at the following link
http://www.gmcpauls.com/SALE_SPECIALS.htm
GMCPaul

subscribing as a note to self

killer71 · 05-08-2010, 06:15 PM

ditto

100gold · 05-08-2010, 06:48 PM

Took heed of this thread. Ordered precision seals from Wes at ch. Glass going in this next wednesday....we'll see. I hope he's someone my age, not my boy's age! ha ha

DT1 · 05-08-2010, 07:04 PM

Quote:

Originally Posted by 100gold

Took heed of this thread. Ordered precision seals from Wes at ch. Glass going in this next wednesday....we'll see. I hope he's someone my age, not my boy's age! ha ha

End the end I finally got it in with a Precision. Tried three others and no go.

lovnthe70 · 05-09-2010, 11:56 AM

Wow I don’t think it should be that hard... I had never installed a windshield before and did mine in about 30 minutes. I put the seal on the window and then set the window in the frame and worked from the bottom up. Was tight in the corners but i just worked it!

04-04-2010, 07:22 AM	#26
msgross Registered User Join Date: Jul 2006 Location: Central PA Posts: 12,201	Re: Did I choose the wrong glass guy? I found an NOS seal, hopefully is works as well... __________________ The Garage: 1968 K-10 SWB - "Project Money Pit" 1996 Z-71 - "huntin rig" 1969 C-10 LWB (SOLD) "Project flip that truck or else" 1993 Passport, F@rd 1-ton (SOLD)"Project Cousin Eddie" My Garage Build "The 1,000 footer"

04-04-2010, 12:20 PM	#27
jugernot Life, Be In It..... Join Date: Oct 2003 Location: Novato, California Posts: 1,498	Re: Did I choose the wrong glass guy? Does anyone have any experience using soff seal window seals? Are they good, bad or okay? __________________ Project Name: LEMON DROP. Reconstruction started "December 2000". Projected completion date "Who knows" http://67-72chevytrucks.com/vboard/s...d.php?t=200082

04-05-2010, 11:04 AM	#29
crakarjax Registered User Join Date: Dec 2009 Location: Kirkland, WA Posts: 1,302	Re: Did I choose the wrong glass guy? I like soff-seal, haven't used them on my truck but they are (were) pretty high quality. __________________ 1968 LWB C20 / AC / Wood Bed

04-10-2010, 10:02 PM	#30
DT1 Registered User Join Date: Oct 2009 Location: Gardnerville Nv No Mo Cali!! Posts: 869	Re: Did I choose the wrong glass guy? Well, The third glass guy just gave up. I contacted GMC Paul for a Precision seal. Hopefully it will work. This is really chaping my ass now! Including flat bedding the truck all over, I have now spent over $400 and still no windshield. I could understand it if the truck was rolled and the pillars were bent but that's not the case.

04-19-2010, 10:30 AM	#32
DT1 Registered User Join Date: Oct 2009 Location: Gardnerville Nv No Mo Cali!! Posts: 869	Re: Did I choose the wrong glass guy? I finally got the windshield in yesterday. The moral of the story is; Use a Precision seal and you wont have to spend five weeks and $500.

04-19-2010, 10:45 AM	#33
FRENCHBLUE72 PROJECT 7DEUCE Join Date: Dec 2002 Location: GRANTS PASS OR Posts: 21,606	Re: Did I choose the wrong glass guy? Congrats on finally getting the glass in.. __________________ GO BIG GREEN GO DUCKS MEMBER #6377 72 k-5 daily driver 6'' lift 35'' 350-350-205 slowly getting rust free. Project "7DEUCE" check out my build http://67-72chevytrucks.com/vboard/s...d.php?t=267665 Tim Powell..R.I.P EastSideLowlife..... R.I.P..

05-08-2010, 06:15 PM	#35
killer71 Registered User Join Date: May 2006 Location: at work Posts: 2,552	Re: Did I choose the wrong glass guy? ditto __________________ R.I.P. Killer 71 10/26/07

05-08-2010, 06:48 PM	#36
100gold Registered User Join Date: May 2009 Location: Weiser,Idaho Posts: 234	Re: Did I choose the wrong glass guy? Took heed of this thread. Ordered precision seals from Wes at ch. Glass going in this next wednesday....we'll see. I hope he's someone my age, not my boy's age! ha ha

05-09-2010, 11:56 AM	#38
lovnthe70 Registered User Join Date: Nov 2008 Location: Tempe, AZ Posts: 181	Re: Did I choose the wrong glass guy? Wow I don’t think it should be that hard... I had never installed a windshield before and did mine in about 30 minutes. I put the seal on the window and then set the window in the frame and worked from the bottom up. Was tight in the corners but i just worked it! __________________ 1970 GMC- 454 DONT GIVE ME NO JIBBA JABBA!!!



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.