Is there any reason I shouldnt shave the stake holes in my bed? - The 1947 - Present Chevrolet & GMC Truck Message Board Network

AirSpeed · 05-21-2010, 02:04 AM

I am painting the bed on my 72 GMC 4X4 and the stake holes are a mess, who ever owned the truck in the past destroyed them, the last painter tried to fix the edges with bondo that fell off long ago. I have never used the stake holes in any of my trucks so I wont miss them. Are there any reasons I cant weld in some steel and get rid of them? Any tips on doing so?
I have a MIG and I am a decent welder, what kind of things do I need to be aware of to do something like this?
Thanks! Aaron

VA72C10 · 05-21-2010, 02:10 AM

I don't see any reason why not if you never plan to use them. Just clean up the metal around it and weld in a patch, grind it down and paint!

Beuford · 05-21-2010, 07:29 AM

I cut 16ga pieces to fit and welded them in. It took only a thin coat of filler to completly hide them.

Hottrucks · 05-21-2010, 07:44 AM

I have the same issue..I think I'm just going to get the push down tie downs....this way If I want to strap a cooler down or something I'll have it...also if you cover them you still have the box inside the bed...

big_al_71 · 05-21-2010, 07:50 AM

when I repaint my truck those holes will be welded shut forever.....

my67chevytruck · 05-21-2010, 08:09 AM

we welded/shaved ours. you can make your own patches or get them from member infanti .

68_chop_top · 05-21-2010, 08:42 AM

Weld them over! The look is smooth and clean. The pockets below have holes in them which make excellent connections for bungy cord hooks to tie something off.

**FRENCHBLUE72** · 05-21-2010, 10:10 AM

fill em in I made metal fillers for mine and they are now gone forever..

Ackattack · 05-21-2010, 10:23 AM

I filled mine

on my 72 I had, I had eye bolts through the stake pocket box on the inside of the bed for tieing things too. Might want to do that before you weld them closed.

AirSpeed · 05-21-2010, 10:31 AM

Thanks for all the replies! They are going away today. I think I will weld a 3/8" nut in the bottom of the stake pocket before I seal them up, that way I can screw in an i-bolt or similar later if I need to.
Thanks again! Aaron

**70shortfleet** · 05-21-2010, 10:49 AM

I did mine about 10 or 15 years ago, time flies, welded in some home made pieces, skimmed some filler over them, painted and have never had a problem

Quackaddict · 05-21-2010, 10:52 AM

I don't see why not, people shave stuff all the time. What I like about that is most people would never notice I like subtle things like that.

AirSpeed · 05-21-2010, 06:56 PM

I got them done, I am really happy with the look, I wish I had done it in the first place, I would have saved myself tons of work. I used some 16 gauge nail plates, I had to grind off a little to get them to fit but that was easy.
Thanks again! Aaron

RaceAGMC · 05-21-2010, 08:03 PM

Quote:

Originally Posted by 70shortfleet

I did mine about 10 or 15 years ago, time flies, welded in some home made pieces, skimmed some filler over them, painted and have never had a problem

Not to hijack the thread but do you have more pics of your yellow truck?

**70shortfleet** · 05-21-2010, 09:10 PM

Quote:

Originally Posted by RaceAGMC

Not to hijack the thread but do you have more pics of your yellow truck?

I posted some under How about some pictures of your 67-72 trucks. Page 126 The back looks alot better than the front for right now! This is my never ending build

AirSpeed · 05-22-2010, 01:50 AM

Quote:

Originally Posted by 70shortfleet

I did mine about 10 or 15 years ago, time flies, welded in some home made pieces, skimmed some filler over them, painted and have never had a problem

Is that paint 15 years old? It looks brand new! Nice truck!

**70shortfleet** · 05-22-2010, 08:35 AM

Quote:

Originally Posted by AirSpeed

Is that paint 15 years old? It looks brand new! Nice truck!

Yes, the paint is that old! It is the factory light yellow (LACQUER)

Racinaround · 05-23-2010, 01:57 AM

I wished i would of??

The next one!

05-21-2010, 02:04 AM	#1
AirSpeed Registered User Join Date: Jul 2007 Location: Fall River California Posts: 2,026	Is there any reason I shouldnt shave the stake holes in my bed? I am painting the bed on my 72 GMC 4X4 and the stake holes are a mess, who ever owned the truck in the past destroyed them, the last painter tried to fix the edges with bondo that fell off long ago. I have never used the stake holes in any of my trucks so I wont miss them. Are there any reasons I cant weld in some steel and get rid of them? Any tips on doing so? I have a MIG and I am a decent welder, what kind of things do I need to be aware of to do something like this? Thanks! Aaron

05-21-2010, 02:10 AM	#2
VA72C10 VA72C10 Join Date: Mar 2008 Location: Midlothian, VA Posts: 25,269	Re: Is there any reason I shouldnt shave the stake holes in my bed? I don't see any reason why not if you never plan to use them. Just clean up the metal around it and weld in a patch, grind it down and paint! __________________ Looking for a 67-72 swb or blazer project in or around VA.

05-21-2010, 07:29 AM	#3
Beuford Registered User Join Date: Oct 2009 Location: Townville,Pa Posts: 284	Re: Is there any reason I shouldnt shave the stake holes in my bed? I cut 16ga pieces to fit and welded them in. It took only a thin coat of filler to completly hide them. Attached Images Last edited by Beuford; 05-21-2010 at 07:30 AM.

05-21-2010, 07:44 AM	#4
Hottrucks Redefining LowBudget Join Date: Mar 2009 Location: lebanon Cow Hampshire Posts: 4,538	Re: Is there any reason I shouldnt shave the stake holes in my bed? I have the same issue..I think I'm just going to get the push down tie downs....this way If I want to strap a cooler down or something I'll have it...also if you cover them you still have the box inside the bed...

05-21-2010, 07:50 AM	#5
big_al_71 Registered User Join Date: Jun 2008 Location: South Florida Posts: 11,375	Re: Is there any reason I shouldnt shave the stake holes in my bed? when I repaint my truck those holes will be welded shut forever..... __________________ Get your facts first, and then you can distort them as much as you please!!!!!. Sylvester's build thread >>>http://67-72chevytrucks.com/vboard/s...ht=big+rebuild

05-21-2010, 08:09 AM	#6
my67chevytruck Under Construction Join Date: Oct 2007 Location: Midlothian,TX (DFW) Posts: 4,555	Re: Is there any reason I shouldnt shave the stake holes in my bed? we welded/shaved ours. you can make your own patches or get them from member infanti . __________________ Heath subscribe to the board here: http://67-72chevytrucks.com/vboard/payments.php http://67-72chevytrucks.com/vboard/s...d.php?t=157669 FAQ how to's 1956 Chevy Apache 1967 C10 SWB FleetSide (under construction) 1969 K10 SWB FleetSide (Future Build) 1972 C10 SWB Stepside (Future Build) 56 chevy truck : http://www.cardomain.com/ride/2955823/1 67 truck build: http://www.67-72chevytrucks.com/vboard/showthread.php?t=281357/1 69 k10: http://67-72chevytrucks.com/vboard/s...d.php?t=389470

05-21-2010, 08:42 AM	#7
68_chop_top Registered User Join Date: May 2008 Location: Granbury, TEXAS Posts: 250	Re: Is there any reason I shouldnt shave the stake holes in my bed? Weld them over! The look is smooth and clean. The pockets below have holes in them which make excellent connections for bungy cord hooks to tie something off. __________________ Mine is chopped, has a clutch, and a big block.

05-21-2010, 10:10 AM	#8
FRENCHBLUE72 PROJECT 7DEUCE Join Date: Dec 2002 Location: GRANTS PASS OR Posts: 21,608	Re: Is there any reason I shouldnt shave the stake holes in my bed? fill em in I made metal fillers for mine and they are now gone forever.. __________________ GO BIG GREEN GO DUCKS MEMBER #6377 72 k-5 daily driver 6'' lift 35'' 350-350-205 slowly getting rust free. Project "7DEUCE" check out my build http://67-72chevytrucks.com/vboard/s...d.php?t=267665 Tim Powell..R.I.P EastSideLowlife..... R.I.P..

05-21-2010, 10:23 AM	#9
Ackattack Senior Member Join Date: Aug 2002 Location: Valley Center KS Posts: 3,525	Re: Is there any reason I shouldnt shave the stake holes in my bed? I filled mine on my 72 I had, I had eye bolts through the stake pocket box on the inside of the bed for tieing things too. Might want to do that before you weld them closed. __________________ Project Bruiser: 68 Pro-Touring C-10 5.3L / 4L60E Project Ironhide: 97 GMC Crew Cab 4x4 Cummins SOLD: '69 GMC 1/2T SWB TBI'd: Project No Buck Assembly Manual Index Sign up Thread!!! Factory Service Manual Index

05-21-2010, 10:31 AM	#10
AirSpeed Registered User Join Date: Jul 2007 Location: Fall River California Posts: 2,026	Re: Is there any reason I shouldnt shave the stake holes in my bed? Thanks for all the replies! They are going away today. I think I will weld a 3/8" nut in the bottom of the stake pocket before I seal them up, that way I can screw in an i-bolt or similar later if I need to. Thanks again! Aaron

05-21-2010, 10:49 AM	#11
70shortfleet Senior Member Join Date: Apr 2010 Location: St.Peters, MO Posts: 2,226	Re: Is there any reason I shouldnt shave the stake holes in my bed? I did mine about 10 or 15 years ago, time flies, welded in some home made pieces, skimmed some filler over them, painted and have never had a problem Attached Images

05-21-2010, 10:52 AM	#12
Quackaddict "Hooked on Quack" Join Date: Apr 2010 Location: Midlothian,TX Posts: 154	Re: Is there any reason I shouldnt shave the stake holes in my bed? I don't see why not, people shave stuff all the time. What I like about that is most people would never notice I like subtle things like that. __________________ Semper Fi, Kevin USMC

05-21-2010, 06:56 PM	#13
AirSpeed Registered User Join Date: Jul 2007 Location: Fall River California Posts: 2,026	Re: Is there any reason I shouldnt shave the stake holes in my bed? I got them done, I am really happy with the look, I wish I had done it in the first place, I would have saved myself tons of work. I used some 16 gauge nail plates, I had to grind off a little to get them to fit but that was easy. Thanks again! Aaron

05-23-2010, 01:57 AM	#18
Racinaround Registered User Join Date: Oct 2009 Location: Mountlake Terrace, WA Posts: 260	Re: Is there any reason I shouldnt shave the stake holes in my bed? I wished i would of?? The next one! __________________ 1950 Chevy 1500 1961 C-10 1969 C-10 1971 Chevelle 2008 Dodge HD3500 Tow Rig



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.