GMC Paul's push on weather stripping - The 1947 - Present Chevrolet & GMC Truck Message Board Network

Ackattack · 05-26-2010, 08:19 PM

I got GMC Paul's push on weather stripping, and according to their website, "These push on, and will conform to the stock 45 degree mitered corner above the vent window assembly."

When I look at the weather stripping I got, it doesn't have a miter in it....it's just a continous piece. So did I get the wrong pieces, or do you just install it and the stuff will bend around the corner.

**Classic Heartbeat** · 05-26-2010, 08:56 PM

It will conform. Just use a rubber mallet and lightly tap it in place as you work your way around with it. WES

**Hart_Rod** · 05-26-2010, 09:48 PM

Part number and pictures when you get it installed. TIA.

Beatcoaster · 05-27-2010, 02:16 AM

I have the same ones, after a good bit of work I got mine to fight pretty good, no wind noises inside either. My driver side door still doesn't shut easily, but the passenger side has softened a bit. Driver side still needs the butt bump after teh fact, with the windows up..and in rainy Washington - that is all the time...

Ackattack · 05-27-2010, 10:17 AM

Quote:

Originally Posted by Hart_Rod

Part number and pictures when you get it installed. TIA.

Here's the part number
2660241

and the link
http://www.gmcpauls.com/Pickup.htm

the "old" glue on weather stripping took about 15 seconds to pull off, and the new weather stripping took a little work to get on. Like Wes said, I used a rubber mallet to gently tap it on. It took me probably 45 min to get them on, and the doors close fine (they are adjusted to close with the new glue on weather stripping)

No test drive to check results or pictures yet

gonline71 · 05-27-2010, 01:42 PM

I highly recommend the push on weatherstripping from GMC Pauls. I just ripped out the glue on and installed these. My advice to anyone out there..."DO NOT USE THE GLUE ON TYPE"...messy and constantly pull off. I called a buddy of mine who is doing a build up and told him the same thing. My issue now is I need to remove the excess glue because the push on weatherstripping is a little smaller than the glue on.
Great product and a must buy!

dan42 · 05-27-2010, 02:08 PM

I just installed the push on on my '70, and got a set for my '67 as well. They are really nice, but they don't cover as much around the edge on the inside.

05-26-2010, 08:19 PM	#1
Ackattack Senior Member Join Date: Aug 2002 Location: Valley Center KS Posts: 3,525	GMC Paul's push on weather stripping I got GMC Paul's push on weather stripping, and according to their website, "These push on, and will conform to the stock 45 degree mitered corner above the vent window assembly." When I look at the weather stripping I got, it doesn't have a miter in it....it's just a continous piece. So did I get the wrong pieces, or do you just install it and the stuff will bend around the corner. __________________ Project Bruiser: 68 Pro-Touring C-10 5.3L / 4L60E Project Ironhide: 97 GMC Crew Cab 4x4 Cummins SOLD: '69 GMC 1/2T SWB TBI'd: Project No Buck Assembly Manual Index Sign up Thread!!! Factory Service Manual Index

05-26-2010, 08:56 PM	#2
Classic Heartbeat Project Junkie! Fishing Poor!! Join Date: Dec 1999 Location: Olympia,Wa. 98512 Posts: 10,770	Re: GMC Paul's push on weather stripping It will conform. Just use a rubber mallet and lightly tap it in place as you work your way around with it. WES __________________ On-line catolog Classic Heartbeat Pickup Parts WEHEPP@comcast.net Call us Toll Free (888) 338-2502 Like Us on Facebook No appointment necessary. 72 BB Chevy Custom Deluxe / Custom Camper 67 I-6 (Soon to be 5.7 LS1) Panel 68 BB Chevy Short Bed 72 6.0 LQ9 Short Bed Chevy 4X4 Olympia's fastest growing truck parts supplier. Olympia's home for Wayward Chevys

05-26-2010, 09:48 PM	#3
Hart_Rod ************* Join Date: Apr 2005 Location: Pensacola, FL Posts: 17,837	Re: GMC Paul's push on weather stripping Part number and pictures when you get it installed. TIA. __________________ Rob - https://www.instagram.com/hart_rod_c10 As Iron Sharpens Iron, So One Man Sharpens Another. Proverbs 27:17 FOR SALE: DBW pedal bracket - http://67-72chevytrucks.com/vboard/s...d.php?t=651123 FOR SALE: Hood Brackets http://67-72chevytrucks.com/vboard/s...d.php?t=679945 1987 Silverado SWB - 34.5K original miles http://67-72chevytrucks.com/vboard/s...d.php?t=801834 1969 SuperBurb - http://67-72chevytrucks.com/vboard/s...d.php?t=200387 1968 Farm truck - http://67-72chevytrucks.com/vboard/s...d.php?t=358692 1968 SWB - http://67-72chevytrucks.com/vboard/s...d.php?t=551258 1948 Chevy - http://67-72chevytrucks.com/vboard/s...=122164&page=3

05-27-2010, 02:16 AM	#4
Beatcoaster 69 Fleetside Join Date: Mar 2009 Location: Lake Stevens, WA Posts: 333	Re: GMC Paul's push on weather stripping I have the same ones, after a good bit of work I got mine to fight pretty good, no wind noises inside either. My driver side door still doesn't shut easily, but the passenger side has softened a bit. Driver side still needs the butt bump after teh fact, with the windows up..and in rainy Washington - that is all the time...

05-27-2010, 01:42 PM	#6
gonline71 Registered User Join Date: Jun 2007 Location: Pleasanton, CA Posts: 134	Re: GMC Paul's push on weather stripping I highly recommend the push on weatherstripping from GMC Pauls. I just ripped out the glue on and installed these. My advice to anyone out there..."DO NOT USE THE GLUE ON TYPE"...messy and constantly pull off. I called a buddy of mine who is doing a build up and told him the same thing. My issue now is I need to remove the excess glue because the push on weatherstripping is a little smaller than the glue on. Great product and a must buy!

05-27-2010, 02:08 PM	#7
dan42 Registered User Join Date: Feb 2007 Location: Cali Central Coast Posts: 5,191	Re: GMC Paul's push on weather stripping I just installed the push on on my '70, and got a set for my '67 as well. They are really nice, but they don't cover as much around the edge on the inside. __________________ '67 SWB Fleetside ZZ4/350/Tremec 5-speed/4link/Scott's IFS - and fun as heck! SOLD Click here to support the board Philippians 4: 6-7



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.