TX WTB: Big Back Window inner cab sheetmetal - The 1947 - Present Chevrolet & GMC Truck Message Board Network

SCOTI · 04-26-2010, 10:44 AM

WTB the inner cab sheet metal on a BBW truck for converting my 64. I DO NOT have space for an entire parts truck or cab, so I can only get the inner cab piece. This is what I need ....

Bartonius · 04-26-2010, 12:15 PM

PM Sent

greg65 · 04-26-2010, 01:27 PM

Hey Scotti if the one from Bartonius does not work out I think 65custom has one.

Jakes-66-K10 · 04-29-2010, 06:27 PM

I'm looking for the same piece, if any extras show up.

SCOTI · 05-04-2010, 12:41 AM

Thanks for the responses. I found what was needed @ the Pate swap meet.

*LILRED66* · 05-04-2010, 01:44 AM

I have a few of them, if anyone is still looking. I am going to Denver, then to Phoenix this week. I am going to Dallas, to Houston next week.

aboz · 05-28-2010, 10:19 PM

What are one of these worth?

*LILRED66* · 05-28-2010, 11:19 PM

If you are buying or if you are selling? I have seen them for $100.00, without the glass, up to $400.00 with the glass.

aboz · 05-29-2010, 08:05 AM

I found mine in a Pull-a-Part in Charlotte. They just happened to have a 1960. I used a friend's battery powered SawsAll. It took an hour and three batterys. By the time the third battery died I still had two inches of sheet metal in the driver's door jamb! I continued with the dead SawsAll like I was sawing a log. W

aboz · 05-29-2010, 08:07 AM

[QUOTE=aboz;4003110]I found mine in a Pull-a-Part in Charlotte. They just happened to have a 1960 Apache. I used a friend's battery powered SawsAll. It took an hour and three batterys. By the time the third battery died I still had two inches of sheet metal in the driver's door jamb! I continued with the dead SawsAll like I was sawing a log. With much sweat and a few busted knuckles, I carried that bastard out myself! Glass and all for $35.00! Totally worth it!

**aerotruk63** · 05-29-2010, 12:34 PM

Hook knife and a hammer separates the welds quite nicely and quickly.

04-26-2010, 10:44 AM	#1
SCOTI Registered User Join Date: Apr 2001 Location: DALLAS,TX Posts: 21,938	WTB: Big Back Window inner cab sheetmetal WTB the inner cab sheet metal on a BBW truck for converting my 64. I DO NOT have space for an entire parts truck or cab, so I can only get the inner cab piece. This is what I need .... Attached Images __________________ 67SWB-B.B.RetroRod 64SWB-Recycle 89CCDually-Driver/Tow Truck 99CCSWB Driver All Fleetsides @rattlecankustoms in IG Building a small, high rpm engine with the perfect bore, stroke and rod ratio is very impressive. It's like a highly skilled Morrocan sword fighter with a Damascus Steel Scimitar..... *Cubic inches is like Indiana Jones with a cheap pistol.* Last edited by SCOTI; 04-27-2010 at 11:06 PM.

04-26-2010, 12:15 PM	#2
Bartonius Registered User Join Date: Oct 2009 Location: Detroit / Farmington Hills, MI Posts: 22	Re: WTB: Big Back Window inner cab sheetmetal PM Sent __________________ '65 BBW LWB/Pile of Parts http://picasaweb.google.com/barton.michael.e

04-26-2010, 01:27 PM	#3
greg65 Registered User Join Date: Mar 2009 Location: Daphne, Al Posts: 1,120	Re: WTB: Big Back Window inner cab sheetmetal Hey Scotti if the one from Bartonius does not work out I think 65custom has one. __________________ 1965 c-10 swb 1997 c-1500 extended cab 2004 tahoe 1993 mustang gt BUILD THREAD:http://67-72chevytrucks.com/vboard/s...d.php?t=336653

04-29-2010, 06:27 PM	#4
Jakes-66-K10 Registered User Join Date: Aug 2004 Location: Idaho Posts: 640	Re: WTB: Big Back Window inner cab sheetmetal I'm looking for the same piece, if any extras show up.

05-04-2010, 12:41 AM	#5
SCOTI Registered User Join Date: Apr 2001 Location: DALLAS,TX Posts: 21,938	Re: WTB: Big Back Window inner cab sheetmetal Thanks for the responses. I found what was needed @ the Pate swap meet. __________________ 67SWB-B.B.RetroRod 64SWB-Recycle 89CCDually-Driver/Tow Truck 99CCSWB Driver All Fleetsides @rattlecankustoms in IG Building a small, high rpm engine with the perfect bore, stroke and rod ratio is very impressive. It's like a highly skilled Morrocan sword fighter with a Damascus Steel Scimitar..... *Cubic inches is like Indiana Jones with a cheap pistol.*

05-04-2010, 01:44 AM	#6
LILRED66 Account Suspended Join Date: May 2005 Location: Kansas City, KS Posts: 3,906	Re: WTB: Big Back Window inner cab sheetmetal I have a few of them, if anyone is still looking. I am going to Denver, then to Phoenix this week. I am going to Dallas, to Houston next week.

05-28-2010, 10:19 PM	#7
aboz Registered User Join Date: Feb 2009 Location: indian trail, nc Posts: 192	Re: WTB: Big Back Window inner cab sheetmetal What are one of these worth? __________________ ABOZ

05-28-2010, 11:19 PM	#8
LILRED66 Account Suspended Join Date: May 2005 Location: Kansas City, KS Posts: 3,906	Re: WTB: Big Back Window inner cab sheetmetal If you are buying or if you are selling? I have seen them for $100.00, without the glass, up to $400.00 with the glass.

05-29-2010, 08:05 AM	#9
aboz Registered User Join Date: Feb 2009 Location: indian trail, nc Posts: 192	Re: WTB: Big Back Window inner cab sheetmetal I found mine in a Pull-a-Part in Charlotte. They just happened to have a 1960. I used a friend's battery powered SawsAll. It took an hour and three batterys. By the time the third battery died I still had two inches of sheet metal in the driver's door jamb! I continued with the dead SawsAll like I was sawing a log. W __________________ ABOZ

05-29-2010, 08:07 AM	#10
aboz Registered User Join Date: Feb 2009 Location: indian trail, nc Posts: 192	Re: WTB: Big Back Window inner cab sheetmetal [QUOTE=aboz;4003110]I found mine in a Pull-a-Part in Charlotte. They just happened to have a 1960 Apache. I used a friend's battery powered SawsAll. It took an hour and three batterys. By the time the third battery died I still had two inches of sheet metal in the driver's door jamb! I continued with the dead SawsAll like I was sawing a log. With much sweat and a few busted knuckles, I carried that bastard out myself! Glass and all for $35.00! Totally worth it! __________________ ABOZ

05-29-2010, 12:34 PM	#11
aerotruk63 Check The Champ, Demonstrator Join Date: Jun 2009 Location: Montreal,Quebec Posts: 6,625	Re: WTB: Big Back Window inner cab sheetmetal Hook knife and a hammer separates the welds quite nicely and quickly. __________________ 1963 *Chevrolet Truck* Literature LINK: https://picasaweb.google.com/113840717762774560215 YouTube Channel with 20+ Original *Chevrolet Truck* Salesmen, Mechanics & Service Department Training Slideshows. https://www.youtube.com/results?sear...otruk63&page=1



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.