|
06-01-2010, 06:37 PM
|
#6 |
|
Gettin It One Pice At A Time
Join Date: Oct 2004
Location: everett, washington
Posts: 2,688
|
Re: valve cover gaskets
What I did last time was put some gorilla snot on both the gasket(one side) and cover. Gorilla snot will actually not dry hard, it will be stretchy and is better. placed it on there and used cloths pins and kept it on there till it dried. Use cork only, learned that rubber can sometimes harden and lose its seal and cork is softer so you don't need to reef on the bolts and warp the covers.
__________________
RIP ELJAY   Work In Progress 1979 GMC C1500 Trailering Special. Getting the truck done, one piece at a time. “You can tell a lot about a fellow’s character by his way of eating jellybeans.”Ronald Reagan “I don’t know the key to success but I know the key to failure is trying to please everybody.” Bill Cosby Last edited by 79gmcc15; 06-01-2010 at 06:37 PM. |
|
|
| Bookmarks |
|
|
Threaded Mode