Steering Wheel question. - The 1947 - Present Chevrolet & GMC Truck Message Board Network

Warbones · 05-22-2003, 10:38 PM

The steering wheel was cut off of the shaft. ( Not using a puller ) How do I remove this part of the shaft?

Roberty · 05-22-2003, 11:04 PM

If I understand you correctly, Someone cut the steering wheel off the steering column and left the splined part of the shaft in the steering wheel - Correct? Just use a punch and hammer or something similar and drive it out. If you have a vise, put the steering wheel on it with enough opening on the jaws of the vise to drive the shaft out.
Robert

05-22-2003, 10:38 PM	#1
Warbones Navel Inspector Join Date: Mar 2003 Location: Wichita, Ks Posts: 1,373	Steering Wheel question. The steering wheel was cut off of the shaft. ( Not using a puller ) How do I remove this part of the shaft? __________________ 1948 Chevy Aerosedan GONE! I think. 1984 Cadillac Fleetwood Brougham Coupe WANTED 1967 IMPALA 1967 CST C10 Long Bed with a 283

05-22-2003, 11:04 PM	#2
Roberty Hot Damn - Here I Am!! Join Date: Feb 2000 Location: Ringgold, Georgia Posts: 726	If I understand you correctly, Someone cut the steering wheel off the steering column and left the splined part of the shaft in the steering wheel - Correct? Just use a punch and hammer or something similar and drive it out. If you have a vise, put the steering wheel on it with enough opening on the jaws of the vise to drive the shaft out. Robert __________________ My vehicles: '90 Silverado Sport '71 Chevelle SS Convertible '70 C-10 - My Grandfather bought it new - original un-restored



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.