Time to get ready for the heat - The 1947 - Present Chevrolet & GMC Truck Message Board Network

1-2many · 06-02-2010, 06:36 PM

Where would someone find A/C hoses to fit the '95 compressor to the '70 POV? Or is there something better?

Thanks,
Jay

crushermechanic · 06-02-2010, 10:18 PM

we get hoses custom made at work by a hose and rubber shop. you might check with some of them in your local area. a lot of the time they are cheaper than oem as a plus.

silverstreak · 06-02-2010, 11:35 PM

I was in the same situation when I swaped a serpentine belt setup from an 89 Caprice into a 70 Chevelle. I took some measurements and had a custom set made here.
http://www.cumminsradiator.com/cummins-radiator.html

06-02-2010, 06:36 PM	#1
1-2many Registered User Join Date: Jun 2006 Location: Central California Posts: 39	Time to get ready for the heat Where would someone find A/C hoses to fit the '95 compressor to the '70 POV? Or is there something better? Thanks, Jay Attached Images __________________ Free beer is good beer.

06-02-2010, 10:18 PM	#2
crushermechanic Registered User Join Date: Dec 2009 Location: Fort Walton Beach, Fl Posts: 357	Re: Time to get ready for the heat we get hoses custom made at work by a hose and rubber shop. you might check with some of them in your local area. a lot of the time they are cheaper than oem as a plus.

06-02-2010, 11:35 PM	#3
silverstreak Registered User Join Date: Mar 2009 Location: USA Posts: 255	Re: Time to get ready for the heat I was in the same situation when I swaped a serpentine belt setup from an 89 Caprice into a 70 Chevelle. I took some measurements and had a custom set made here. http://www.cumminsradiator.com/cummins-radiator.html



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.